Cinderblock, even when filled with poured concrete, is very porous on a surface and internal level. Further, cinderblock is bound together by grout, leaving the areas between the blocks vulnerable. It is very common for cinderblock to have water and moisture issues. On a positive note, there is a very simple solution.
2. Cinderblock, even when filled with poured
concrete, is very porous on a surface and internal
level. Further, cinderblock is bound together by
grout, leaving the areas between the blocks
vulnerable. It is very common for cinderblock to
have water and moisture issues. On a positive note,
there is a very simple solution.
3. The best sealers to use on cinderblock are the Armor SX5000 or the
Armor SX5000 WB (water based version of the SX5000). Both sealers
penetrate into the block and fill in the pores completely. As the
chemical reaction between the sealer and concrete takes place, the
liquid hardens inside the pores. The Armor SX5000 or the Armor
SX5000 WB are guaranteed to stop 100% of water and moisture and
will reduce vapor transmission to 11%. The Armor SX5000 or the
Armor SX5000 WB are the best water repellents on the market for
porous substrates.
The Armor SX5000 or the Armor SX5000 WB can be used to seal
concrete block and concrete floors. It can also be applied over the
grout to protect the grout from water and moisture.
APPLICATION INSTRUCTIONS
• Armor SX5000 Application Instructions
• Armor SX5000 WB Application Instructions
4. The Armor SX5000 is a low-VOC, solvent based
silane/siloxane based water repellent for concrete,
cinderblock (CMU), brick, and unglazed tile. The Armor
SX5000 penetrates and reacts with minerals within the
substrate to create a hydrophobic barrier against water
absorption.
Solvent based silane-siloxane sealers have been proven to
bond better, last longer, and perform better than water
based silane/siloxane sealers!
5. The Armor SX5000WB is zero VOC, water-based
silane/siloxane based water repellent for concrete,
cinderblock (CMU), brick and unglazed tile. The
Armor SX5000 WB penetrates up to 2″ and reacts
with minerals within the substrate to create a
hydrophobic barrier against water absorption.
When properly applied, the Armor SX5000 will
repel water for up to 10 years!
6. Visit Us!
Learn more about Foundation Armor’s
professional grade line of concrete sealers,
concrete coatings, concrete cleaners and
concrete repair products by visiting
FoundationArmor.com or by calling
1-866-306-0246.