Calibration services brochure 2011

Service and Calibration Centre

Testo Ltd has over 50 years of experience in the design, development and manufacture of
sensors and instrumentation. Building on this experience Testo Ltd has a fully equipped
service, calibration and repair centre run by an experienced team. Our UKAS (ISO/IEC
17025:2005) accredited laboratory calibrates a wide range of instrumentation within the
parameters of temperature, humidity and dew point.

We manage equipment inventories of varying quantities offering fixed term contracts with fast
turnaround times at competitive prices.

Laboratory Capabilities
Our UKAS (ISO/IEC 17025:2005) Our laboratory is also equipped to provide
accredited laboratory is equipped to calibration traceable to national or international
provide calibration for: standards for:

UKAS Calibration ISO calibration
• Pressure – 0 to 70 bar, low pressure
• Temperature in the range of -70 to
180°C • Gas Analysis – O2, CO, NO, NO2, HC, SO2
and CO2
• Humidity from 10 to 90%rh in the
range of 0.0 to 50.5°C • Air velocity
• Lux – 2 to 17,000 lux
• Dew point/frost point in the range -
25 to 48°C • Sound level
• Current
• Voltage
• Resistance simulation – 4 wire, 2-3 wire
• RPM
• On-Site Calibration

T: 01420 544 433 • E: service@testo.co.uk • W: www.testo.co.uk • Shop: www.testodirect.co.uk

Testo Pneumator - Pressure Calibrator and Measuring Instrument

The Testo Pneumator is a precision pressure calibration and measuring instrument that can be
used for stationary applications (in a laboratory) and as a portable calibrator. It is fully programmable
to aid calibration, combining high accuracy with simple functionality and reliable battery operation.
Application uses range from laboratory, cleanroom, air conditioning and process control.

High accuracy even in lower Pa range Technical Data
Long term battery operation for mobile Measuring range 4 types (1, 10, 100, 1000 hPa)
Measurement 0.3% of scale ± 1 digit (meas range 1
applications inaccuracy hPa), 0.1% of scale ± 1 digit (meas
range 10, 100, 1000 hPa)
High zero point stability due to automatic
Linearity 0.2% of scale ± 1 digit (meas range 1
adjustment hPa), 0.1% of scale ± 1 digit (meas
range 10, 100, 1000 hPa)
Fast provision of differential and relative Temperature drift int. Zero point: 0.03% of scale/K (0% by
reference sensor zero point adjustment) Span: 0.03% of
pressures in calibration mode scale/K
Programmable pressure sequences Working temp range +10° to +40°C

Wide selection of pressure, volume flow Storage temp range -10° to +70°C
and flow velocity units.
Part Number Price £
1hPa 0519 0816 / 10hPa 0519 0817 / 100hPa 0519 0818 / 1000hPa 0519 0819 £5,900.00

Accessories Part Number Price £

Transport Case 0519 0849 £540.00


Testo Huminator - High Precision Humidity Chamber

The Testo Huminator allows quick and easy calibration of Testo and non Testo branded
humidity measuring instruments, probes and data loggers. A high performance, stand alone
temperature and humidity reference generator featuring a thermal servo system to guarantee
stable humidities at temperatures in the range of 15 to 40 ⁰C.

Front panel allows calibration of up to 4 humidity probes simultaneously
Simple menu for setting parameters
Technical Data
RS-232 interface Temperature range 15 to 40°C

Easy to read graphic display Humidity range 5 to 95%RH
Dimension meas. ca. 147 mm diameter
chamber probe depth 170 mm
Huminator Kit
Accuracy Temperature 0.5°C (10-85%RH at 25°C)
Includes Huminator, sensor and 15 probe Humidity 2%RH (10-85%RH at 25°C)
Stability 0.2°C (10-85%RH at 25°C)
adapters

Part Number 0519 0801
Price £9,894.00




Servicing and Repair
For our range of flue gas analysers we offer a pick up and return service and guaranteed 3 day or 36
hour turnaround time. Arrange online at www.testodirect.co.uk or call 01420 566 845.

Pick up and return is included in the price – we provide a label and our courier collects from you
Turnaround time is guaranteed – or you don’t pay*
No annual commitment
The following services are available:
Flue Gas Analysers Service & Calibration
Description Part Number Price £
Standard yearly service and ISO calibration for Testo 325, Testo 327 and Testo 330 300000 0010 79.00
analysers. Includes pick up and return service and 3 working day turnaround time*
Express yearly service and ISO calibration for Testo 325, Testo 327 and Testo 330 300000 0030 106.00
analysers. Includes pick up and return service and 36 hour turnaround time*

Fixed Price 5 Year Service Contracts & Extended Warranties
We offer warranty & service contracts for our Testo 327 &
Testo 330LL Flue Gas Analysers.

Costs are fixed for five years - no nasty surprises!
Payment is annual and invoiced at the time of service and is
spread evenly over the contract period
For the Testo 327, the warranty period is extended to 5 years
Price includes cost of calibrating the unit and the issue of an
ISO certificate valid for 12 months
Carriage return is at a preferential cost of £7.50
The following packages are available:
Fixed Price 5 Year Contracts
Testo 327 5 Year Service Contract and Extended Warranty 300000 3272 99.00
5 year extended no catch warranty (on instrument and sensors), annual service and
calibration and replacement cells where needed. Annual price fixed for 5 years.
Payable annually after first year**.
Testo 330LL 5 Year Service Contract 300000 3273 90.00
5 year annual service and calibration contract. Annual price fixed for 5 years.
Payable annually after first year**.
* Terms apply, Guaranteed turnaround time from receipt of your approval to proceed to despatch from our service & calibration facility. Only
applies to standard service and calibration of Testo 327, 330 & 325. ** Conditions apply, call for details.


On-Site Services
We are able to service and calibrate a range of instruments at your own premises resulting in
reduced turnaround time and improved efficiency. If you have a requirement for on site
calibration then please contact us for a quotation.

Saveris: wireless temperature and
humidity data logging system
• On-site survey to confirm system
requirements
• Installation and set up
• Training, if required
• System calibration to either UKAS or ISO
certification. Calibration can be carried out in
our laboratory or on-site to avoid system
downtime.

On-Site Servicing of Domestic
Flue Gas Analysers

We can offer on site service and calibration
of Testo 325, 327 and 330 Flue Gas
Analysers. Please call for further details
or a competitive quotation.

Pick up and Return Service
Testo offer a pick up and return service for all our other instruments. To find out more about how
this service works simply call our Service Team on 01420 566 845.


Calibration Equipment
Testo Thermator - Multifunction Temperature Calibrator

The Testo Thermator can be used as a stationary or portable calibrator with an operating
range of -20 to +150 °C. The Thermator can calibrate a range of thermal instruments using
liquid bath, dry block, infrared or surface options.

The Testo Thermator offers the following Thermator Kit
benefits: Includes one control sensor, 3 inserts
Simple and fast conversion using different (IR, surface and dry block) with 7 standard
inserts bore holes, an insert basket, draining pump,
Regulation by internal or external sensor silicone oil, magnetic lifter and magnet stirrer.
High stability and quick regulation of set
Part Number 0519 0901
index values
Price £6,800.00
Up to 4 programmable set values
Re-calibration at minimal costs
Technical Data
liquid bath dry block infrared surface
Temperature range -20 °C to +150 °C
Accuracy ± 0.1k ± 0.3k ± 1k ± 1.5k, 100 °C,
± 1.5k <100 °C
Stability ± 0.05k ± 0.05k ± 0.3k ± 0.2k




Ordering Information
Below is a selection of the calibration services we offer. If you have any other requirements,
require further information or would like a no obligation quotation please call 01420 544 433
or email service@testo.co.uk.

UKAS Humidity
UKAS Humidity Calibration (11.3/45.3/75.3 %rh at 25 °C) 300520 0202 165.00

UKAS Temperature: Immersion & penetration
UKAS Calibration. 3 point: -18 °C, 0 °C, +60 °C or 0 °C, +50 °C, +100 °C Various - please call 108.50

ISO Humidity
ISO Humidity Calibration (11.3/45.3/75.3 %rh at 25 °C) 300520 0078 99.00

ISO Temperature: Air, penetration, IR, immersion
ISO Calibration. 1 point: -18 °C or +60 °C or +120 °C Various - please call 35.00
ISO Calibration. 2 point: -18 °C, 0 °C or 0 °C, +60 °C Various - please call 47.00
ISO Calibration. 3 point: -18 °C, 0 °C, +60 °C or 0 °C, +50 °C, +100 °C Various - please call 59.00

ISO Temperature: Surface probes
ISO Surface Temperature Calibration: +50 °C, +100 °C, +150 °C 300520 0080 71.50
ISO Infrared & Surface Calibration: +50 °C, +100 °C, +150 °C 300520 0038 95.00

ISO Air velocity (0.4 to 32.5 m/s)
ISO Air Velocity (5 points across range) Various - please call 75.00

Others
ISO Pressure. Digital indicator 5 point rising/falling 300520 0018 60.00
ISO Light Calibration. 5 points 300520 0110 60.00
ISO rpm Calibration. 5 points 300520 0100 35.00
Sound level meters 300520 0104 72.50
Sound level calibrators 300520 0106 35.00

testo Ltd. Tel: 01420 566 845 Fax: 01420 544 419
Newman Lane, Alton, Hants, GU34 2QJ Email: service@testo.co.uk Internet: www.testo.co.uk

Terms and conditions apply. Please contact us for further information. Prices valid until 31st December 2011. Whilst every care has been taken to
ensure that the information included in this document was accurate at the time of printing, we reserve the right to change prices at any time.

Calibration services brochure 2011

Recomendados

Recomendados

Más contenido relacionado

Más de Testo Limited

Más de Testo Limited (20)

Último

Último (20)

Calibration services brochure 2011