This document provides specifications for IEC 3 and 5 mm insulating mats manufactured by CATU S.A. The mats are made of an elastomeric compound with a slip-resistant surface for use as personal protective equipment. They are available in specific shapes or rolls in various standard sizes with thickness of either 3mm or 5mm and maximum in-service voltages ranging from 26.5kV to 36kV depending on the model. The mats are classified according to IEC 61111 standards for use as electrical insulation.

1. IEC 3 and 5 mm INSULATING MAT
MP-42/..MP-60/03 or 05.., MP-100/03 or 05..
CATU - Edition : 04 / 2006 Page 1/1 Technical sheet N°: MP42-MP60-MP100-IEC-GB
CATU S.A. 10 à 20 avenue Jean Jaurès – B.P.2 – 92 222 BAGNEUX - Cedex FRANCE
Téléphone : (33) 1 42 31 46 00 - Télécopie : (33) 1 42 31 46 31
Details of IEC-61111 marking
FIELD OF USE :
Personnel protective equipment.
CHARACTERISTICS :
Manufactured of elastomeric compound with slip resistant surface.
High quality dielectrical material.
Available either of specific shapes or in rolls.
REFERENCE CEI-61111 Thickness
in mm
Length x Width
in mm
Maximum in service
voltage in kV (1)
MP-42/11 class 3 3 1 000 x 1 000 26,5
MP-42/16 class 3 3 1 000 x 600 26,5
MP-42/66 class 3 3 600 x 600 26,5
MP-60/03-5 class 3 3 600 x 500 26,5
MP-60/03-10 class 3 3 10 000 x 600 26,5
MP-100/03-5 class 3 3 5 000 x 1 000 26,5
MP-100/03-10 class 3 3 10 000 x 1 000 26,5
MP-60/05-5 class 4 5 5 000 x 600 36
MP-60/05-10 class 4 5 10 000 x 600 36
MP-100/05-5 class 4 5 5 000 x 1 000 36
MP-100/05-10 class 4 5 10 000 x 1 000 36
(1) Correspond, on multiphase circuits, to the nominal voltage phase to phase. If there is no
multiphase exposure in a system area, and if the voltage exposure is limited to the phase to
ground potential, the phase to ground potential shall be considered to be the nominal voltage.
WWW.CABLEJOINTS.CO.UK
THORNE & DERRICK UK
TEL 0044 191 490 1547 FAX 0044 477 5371
TEL 0044 117 977 4647 FAX 0044 977 5582
WWW.THORNEANDDERRICK.CO.UK