Metrohm METE3640 4kV Flash Tester
LV HV Electrical Testing
Digital Flash Tester
Martindale Electric Flash Testers & Insulation Testers
Martindale Electric Metrohm METE3640 4kV Flash Tester Description
The Metrohm E3640 is a 4kV AC flash tester is capable of operating from either a 115V or 230V supply, at 50 or 60Hz. the Metrohm E3640 has a twin 3 1/2 digit LCD display which shows both output voltage and leakage current. The Metrohm flash tester device is built into a robust carry case, making it easily portable.
The Metrohm E3640 is a 4kV AC flash tester has three modes of operation, where the fail lamp on the E3640 illuminates and a buzzer will sound:
1. Trip: will trip when a pre-determined current is exceeded
2. Breakdown: fast transients can trigger the trip
3. Burn: where the trip function is by-passed and the fault current flows continuously to expose the fault
Martindale Electric Metrohm METE3640 4kV Flash Tester Specifications
Power Requirement: 115 / 230V +/- 15%, 50/60Hz, 40VA
Fuses: 230V: 5 x 20mm 0.25A, HBC, Type F
115V: 5 x 20mm 0.5A, HBC, Type F
Output Voltage Range: 0 - 2.2, 0 - 4.2kV 50 / 60Hz AC
Accuracy: +/- 2% of reading +/- 1 digit
Leakage Current: 0 - 5mA (nominal), 50 / 60Hz in 10µA steps
Accuracy: +/- 2% reading, +/- 1 digit
Trip Level Range: 0 to 3mA 50 / 60Hz
Setting Accuracy: +/- 5% of full range
Trip Response Leakage: Will trip for fault duration >5mS but not for <100µS
Breakdown: Will trip for fast transients of 30µS and above
Complies with: EMC to BS EN 50081-1 & BS EN 50082-2
Safety & Flash Test: BS EN 61010-1
Dimensions: 330 x 263 x 144mm
Weight: 4kg approx
Martindale Electric Metrohm METE3640 4kV Flash Tester Contents
Metrohm METE3640 4kV Flash Tester
Flash gun
Earth lead
Mains power lead
Instruction manual