CompetitionX How To: Binding your Tactic Radio System. More available from http://www.competitionx.com.

1. Binding Tactic Radio to Receiver
competitionx.com /radio-binding/binding-tactic-radio-to-receiver/
Instructions for binding a Tactic 2.4GHz transmitter to your receiver.
This procedure has been tested with the following:
Transmitters
• Tactic TTX240
• Tactic TTX300
• Tactic TTX404
Receivers
• Tactic TR324
• Tactic TR325
The Procedure
Step 1. Turn on the transmitter.
Step 2. Plug your battery in and turn on the receiver.
Step 3. If the receiver LED flashes once and then stays on, the
receiver is already bound to this transmitter; skip to step 4. If the
receiver LED does not flash or stay on, insert a small diameter
screwdriver through the hole marked “BIND” or “LINK”. Press the push-button until the receiver LED glows
red and then turns off after about one second.
Step 4. Release the “BIND”/”LINK” button. If the binding is successful, the receiver LED will flash once and
then remain on.
All set! If the transmitter doesn’t control the car, repeat steps 1-4 above.