Hyper pressure v type grinder new type grinding machinegrinder machine

1. Hyper Pressure V Type Grinder/New type grinding
machine/Grinder Machine
Hyper Pressure V Type Grinder is elaborately designed by our
grinder engineers through the customer's production
requirement and actual using experience, and also is a kind
of new type high performance grinding machine. Comparing with
the traditional trapezium grinder and high pressure supension
grinder, it has many advatages. It is widely used in glass,
rubber, pesticide, porcelain enamel, paint, phosphate
fertilizer and paper making, etc chemical industry. And it is
used for grinding the Moh's hardness is below 7, humidity is
6% and non-flammable, non-explosive materials like talcum,
barite, calcite, limestone, manganese ore, iron ore, ore,
quartz, gypsum, bentonite, etc.
Working Principle:
After reducing driving force of the main motor by the gear
reducer, when the drive center axis and the quincunx rack
fixed on the center axis revolve, under the centrifugal force
the roller revolves around the center axis, at the same time
parallel swing around the shaft, making the roller compress
out side to the ring, thus ensure that the roller and ring

2. has maximum surface contace. At the same time the roller self
revolves around the roller shaft, making the material scooped
up by the shovel blade to grind, after grinding the powder
blew to upper part of the mainframe, the separating by the
separator, too coarse powder drops to the grinding room to
re-grind, the qualified powder airflows into the cyclone
powder collector, through the discharging pipe is qualified
product.
Equipment advantages:
Roller Assembly of the Hyper-pressure V type grinder is
composed of roller sleeve, roller shaft, roller shaft and
bearing. Roller sleeve is double tube structure: through the
uper and lower two bearing the right tube installs roller
shaft and roller, the left tube installs the shaft of roller,
the two ends are vertically fixed on the upper part and the
lower part of the quincunx rack.
Technical Advantages:
1.New technique (quincunx rack and V type roller device), can
directly change the centrifugal force into the grinding
force, that is to say centrifugal force equals grinding
force, and also the roller parallel swings around the
vertical shaft, making the roller compact to the ring, thus

3. ensure that the roller and ring has maximum surface contact,
the capacity can be increased 40% .
2.The separator adopts two types according to the final
product fineness, one adopts blade type (80-325 mesh), the
other adopts mouse type (200-1250mesh).
3.Air conveying and final product collecting system all
changes negative pressure, secondary high efficient powder
catcher makes final product's collecting more thoroughly.
4.Advanced and reasonable structure; highly low equipment's
vibration; low noise; stable mechanical operation and
reliable performance.
Contact us:
TEL : 86-371-67771006
Fax:86-371-67431834
Email:vipeak01@163.com
Address: No.43,Tongbai Road, Zhengzhou, Henan, China
Our grinding machine
website:http://www.vipeakgrinder.com/ http://www.vipeakgroup.
com/Symons.html