1. Ahmed Abdallah Ibrahim, PMP
Cell Phone: (+966) 547187676, (+2) 01090558443
Ahmed_abdallah_ibrahim@yahoo.com
_______________________________________
Page 1 of 6
Personal Information
 Date of birth 18
th
November 1978
 Place of Birth Cairo
 Gender Male
 Nationality Egyptian
 Country of Residence Saudi Arabia
Objectives
Seeking a challenging career in the construction field, where my
experience and background will be well utilized, I would also like to join a well-
established and team oriented organization that provides growth opportunities
for highly motivated individuals.
Education
June 2002 BSc of Engineering
 Faculty of Engineering, Cairo University, Egypt
 Architectural department
Language Skills
 English Excellent
 French Very Good
 Arabic Mother tongue
Certifications and Professional Courses
JAN 2012 Project Management Professional [PMP]
 Certified through Project Management Institute [PMI]
 PMP # 1482994
AUG 2016 Risk Management Professional (RMP)
 PMI Risk Management Professional (PMI-RMP) Preparation Course

2. Page 2 of 6
Work Experience
JAN 2011-Currently Saudi Binladin Group [SBG-ABCD]
Senior Architect-Engineering department
Main Project: King Abdullah Bin Abdulaziz Project third Saudi Expansion of Holy Haram
Makkah & Surrounding Areas.
 Consultant of the project : Dar Al-Handasah
 Project Budget : more than 100 Billion S.R
 Duties and Responsibilities:
 Make Work Breakdown Structure (WBS) for All Scopes.
 Carry Out Design Review.
 Reviewing design drawings to assure conformity with
international/national codes and standards (SBC, ICC, IBC, IFC, NFPA
...etc.)
 Issue RFI’s upon need when mistakes, conflicts, miss coordination
between drawings and different disciplines or when necessary data are
missing.
 Prepare material submittals and coordinate between the consultant from
one side and vendors and sub-contractors on the other side.
 Work on proposals to resolve constructability problems on site - if any -
and submit to consultant for approval.
 Prepare technical packages to serve the procurement, quantity survey,
cost control and planning departments.
 Issue drawing submittals from sub-contractors to get consultant's
approval.
 Evaluating and comparing technical offers submitted by bidders through
tendering process, according to project specifications and requirements
 Reviewing Draft Contracts for bids’ winner.
 Coordinate with other engineering disciplines including structural,
electrical and mechanical to meet the project design and specifications in
accordance with safety and environmental standards.
 Periodically evaluate subcontractors’ performance during execution
phase.

3. Page 3 of 6
 Major Achievements
 Personal Achievements:
 I have achieved the PMP certification and started to apply its tools
and techniques in all my tasks.
 Gained a deep understanding of building codes and standards.
 Problem Solving for technical issues; There was a problem on site
in fixing the smoke curtains after fixing the firefighting items in
false ceiling, they decided to remove all the firefighting
installations, so I made a full model to the levels of the trays and
the fixtures to restudy the possibility of having a new level to fix
smoke curtains and got approval for the model with the new level
from the consultant which saved a lot of cost & time of removing
and fixing all the firefighting installations.
 Team Achievements:
 I have initiated the using of REVIT application by my team
members after organizing learning sessions through certified
instructors of REVIT. Then SBG-ABCD established a new
department for BIM that was based on some of my team
members
 Project Achievements;
 We were behind of schedule and our doors’ subcontractor was
buying the gold plated metal sheets from outside KSA, instead of
exporting the sheets I found another supplier for metal sheets
and the gold plating process was done in one of our factories
which lead to reduce the cost by 60% and saved time by 50%.
 Company Achievements:
 Establishment of the engineering department processes KPIs as
part of the company's QMS initiatives which leads SBG-ABCD to
achieve the ISO certification.
 Created innovative database for suppliers and subcontractors to
be included in the company’s OPA.
 Set many training courses/awareness sessions in coordination
with development department for almost all of the company’s
employees such as: Revit, Project Management Professional
(PMP), Facility Management Professional (FMP), Quality
Management System (QMS).

4. Page 4 of 6
DEC 2007-DEC 2010 AL JOUDAH Contracting Company
Senior Technical Office Architect
AL JOUDAH Contracting Company - Member of Zahran Holding - Jeddah. Saudi Arabia
 Project [1]: LAMAR Towers
 Consultant of the project: Saudi Dyar
 Project management for the project: Turner
 Project Budget: 4 Billion S.R
 Project [2]: Jouf University [Applied Medical science and Science College]
 Consultant of the project: Fahd Al Madlaj
 Project Budget: 285 Million S.R
 Project [3]: Baha University [Community and science College]
 Consultant of the project: Mohammed Al Naeem
 Project Budget: 260 Million S.R
 Project [4]: Hail University [Community College]
 Consultant of the project: Saud Consult
 Project Budget: 130 Million S.R
 Duties and Responsibilities:
 Coordinate between architectural, structural and electromechanical
drawings.
 Reviewing the architectural drawings according to general specifications
and bill of quantity [BOQ].
 Participating in the Architectural shop drawings.
 Coordinate with the main consulting engineers [owner consultant] to
deliver and improve the architectural design drawings.
 Coordinate with site engineers and managers for the execution of the
construction process and any changes occurs due to change in design and
as built.
 Participating in organizing and modifying bill of quantities [BOQ}
according to changes in design.
 Preparing scale drawings and contract documents for building
subcontractors to integrate their elements in master plans.
 Choose suitable materials that comply with project specifications and
prepare their submittals.
 Advise and search for materials alternatives that may function as
specified ones and of better prices.

5. Page 5 of 6
JAN 2007-DEC 2007 CADEC Group
Technical Office Architect
The Scientific Office for Computer Aided Design & Engineering Consultations [for
Engineering Consultancy] - Cairo, Egypt
 Duties and Responsibilities:
 Coordinate between architectural, structural and electromechanical
drawings.
 Participating in the Architectural Design Process
 Participating in the Architectural working and shop drawings.
 Reviewing the architectural drawings according to general specifications
and bill of quantities [BOQ].
 Participating in organizing and modifying bill of quantities [BOQ}
AUG 2003-DEC 2006 ARTECO
Architect and Site Engineer
ARTECO for Engineering Works and Contracting - Cairo, Egypt
 Project [1]: Residential Towers at Helwan
 City Blaza tower
 El Seify tower
 El Salam tower
 Alaa El Dein tower
 Project [2]: Constructing the Social and Sports building at Helwan public club
 Duties and Responsibilities:
 Deal with architectural, structural and electromechanical shop drawings.
 Work with most common concrete casting in situ and deal with all
finishing works.
 Control all the site activities such as; Building materials suppliers, Storing
and warehousing, Coordination between different contractors, Safety
and security of the site.
 Launching construction works on site.
 Responsible for supervision and execution of ongoing construction sites.
 Coordinate with the consulting engineers to deliver and improve all the
structural and architectural works.
 Coordinate filed activities with design changes and internal scheduling.
 Prepare daily construction logs for ongoing projects.

6. Page 6 of 6
Computer Skills
 Courses:
 Autocad [2D-3D]
 Revit
 Photoshop
 M.S. Office (Word, Excel, PowerPoint)
 Certifications
 CIW-410
 HTML, Internet, Network
 CIW-430
 Dynamic Server Pages(ASP, PHP), CGI using Perl
 Diploma in Web Application Development Professional [December 2002-June
2003], Covering the following courses:
 HTML
 Internet
 Network Fundamentals
 Graphics:
 MS FrontPage
 Macromedia DreamWeaver, Macromedia Flash
 PaintShop Pro
 Programming
 JavaScript
 C
 C++
 Advanced Java
 CGI using PERL
 ASP
 JSP
 PHP
 EJB and Servlets
 webSphere Studio Application Developer XML, XSL
 Data Base
 Database Design Methodology
 DB2