1. A Passion for
Excellence
Corporate Office :
20, New Cotton Market, Nagpur - 440 018 Maharashtra (India)
Ph :+ 91-712 - 6666555 Fax : + 91-712-2721484
e-mail : info@bhartias.com web: www.bhartias.com
• It possesses prime Sales Offices network in Nagpur, Raipur, Kolhapur, Ahemadnagar, Pune Ludhiana
Belgaum, Coimbatore, Chennai, Hyderabad, Kolkata, Gurgaon, Faridabad, Ahemdabad and Rajkot.
• Abroad - Indonesia
• Since our products are single sourced, we are striving hard to thwart deficit. Consequently,
we have storage houses in strategic locations like Nagpur, Kolhapur, Belgaum, Hyderabad,
Raipur, Kolkata and Faridabad, Chennai, Coimbatore, Jamshedpur, Bhiwadi.
• BP retains resilient technical support with 5 Sand Testing labs comprising of 6 chemists in
Chandrapur, Nagpur & Belgaum, Rajkot and Kolkatta
Nagpur
Kolhapur
Hyderabad
Raipur
Kolkata
Mumbai
Pune
Upcoming
Rajkot
Ahmedabad
Belgaum
Coimbatore
Chennai
Faridabad
Ludhiana
Bhartia Commitment
Bhiwadi
EXPORTS:
Indonesia | Taiwans | Romania
Sri Lanka | Pakistan
Factory
Godowns
Offices
Labs
*
Jamshedpur
Chandrapur

2. We envision adhering to our Core Values of being
a reliable market leader and simultaneously
offering unsurpassed Organizational Excellence
in all our undertakings…
Carburisers Inoculants
Lustrous
Bhartia Group is a diverse organization
dealing in manufacturing of Additives for Green
Sand based Foundry and Ferroy Alloys, Fluxes
coatings and Carburiseors for Ferrous and Non-
Ferrous Foundries, OPC 43 Grade Cement, Packed
Drinking Water, Low Ash Metallurgical Coke,
HDPE Bags, and Medical Oxygen & Nitrous Gas,
primarily. The company also has broaden its
horizons into mining of limestone and dolomite,
trading of raw materials required by steel and
foundry industries and retail chain of
supermarkets in Nagpur city under the brand
We, the GroupBhartia
“Apna Bhandar”, farming of around 450 acres of
cultivated land and construction of a township
aroundNagpur.
The organization envisions a veracious
tomorrow diversified to meet the expectation of
evolving society and therefore the market. Their
aspiration paved way to the Corporate Office in
Mumbai, Headquarters at Nagpur and various
Branch Offices all around India. The company is ever
embryonic and successfully functioning and
respondingtotherequirementsofthemarket.
PRODUCTS WE MANUFACTURE FOR FOUNDRIES
Lustrous – Green Sand Coal Additive
C++ & C+ – Carburaisers For Carbon Pick Up In Metal
(C.I & S.G)
BP Coat – Water/ Alcohol Refratory Coatings & Spl
purpose Coat, Parting & Cleaning Agents for Mold/ Core
– InoculantsBP Inoc
BP FSM – Ferro Silion Magnesium/ Nodulisers
– Steel ShotsBP SS
1
Steel ShotsCoatings
Ferro Silicon Magnesium

3. About Product
The high pressure molding systems have become increasingly popular in India.
Such molding system gives moulds which altogether require different combination
of Carbonaceous Additives properties. There's need of special type of customized
Carbonaceous Additives, hence Bhartia Pulverisers have produced “LUSTROUS”.
Lustrous For All Types Of Casting
Lustrous
Green Sand Coal Additive
Bhartia Pulverisers is ISO 9001:2000 Certified Unit and a product of Bhartia Group.
Since its inception in 1983, BP has been a pioneer in manufacturing Lustrous Coal
Base Additives entail in Sand Based Casting Industries. BP is a prominent name
when it comes to excellence and time bound delivery since more than three
decades.
The manufacturing unit of BP is based in Chandrapur, Maharashtra, Kolkatta and
soon another unit would be functional in Tamil Nadu.
•BP has the principal capacity in INDIA to produce Lustrous Additives - 55000mt pa
•It is the chief producer of Lustrous Additives in India - 36000 mt pa
•BP ensures that its Tech Team assists foundries to sort their sand related issues
and produce regular Sand Testing Reports for the same.
Lustrous Blends
Lustrous Regular
Specs : VM : 50-60% , Ash : 7%max, FC : By difference
Advantages :
• Reduce imperfections due to the rapid reaction between the silica sand mould
and the oxidized surface of molten iron
• Its thermal decomposition creates voids, which allow for the expansion
of the silica sand grains
• Improve sand peel from casting at shakeout
• Improve flow ability of sand
• Produce smoother, cleaner casting surface
Lustrous L4
VM : 45-50%, Ash: 5% max, FC : By differenceSpecs :
Advantages:
• Balance volatile matter and loss on ignition
• Most commonly used
• Good for both conventional and high pressure lines
Lustrous HC
VM : 35-40%, Ash : 7% max, FC : By differenceSpecs :
Advantages:
• High LOI content & carbon content
• Gives more refractoriness & Low gas evolution
Lustrous S3
Specs : VM : 35-45% , Ash : 6% max, FC : By difference
Advantages :
• Lustrous carbon that forms a thin film with high adhesion on sand grains
• It swells and clogs the intergrain spaces and compensation of thermal stress from
microdilatation of sand grains
• Physically expands itself to fill the spaces between the sand grains
Lustrous P3
Specs : VM : 47 - 57% , Ash : 6.5% max, FC : By difference
Advantages :
• Lustrous P3 is a unique blend developed by R&D dept of BP, which meets
demands for todays' High Pressure Moulding Lines
• Speciality of Lustrous P3 is that, it changes to coke at high temperature,
this action of Lustrous P3 fills voids at the mold/ metal interface
Lustrous CS
Specs : VM : 74.0 to 78.0%, Ash : -3.5% max. FC : By difference
Advantages:
• Lower ash built up in the system sand & higher permeability
• Lower new sand additions reducing cost
• Adaptable to mechanized addition due to excellent flowability
• Lower moisture additions leading to lower pin holes/blow hole porosity in castings
• Excellent as cast finish & peel resulting in lower shot blasting costs

4. 4
C++
C++ is the subsidiary product that after the process of machining electrodes, is
mainly used in metallurgy industry as carbon raisers.
Chemical F.C: 99% min, S: 0.03%
Size 1-5mm, 1-10mm
Properties Top-quality Carbon Additive, High Carbon,
Low Sulphur and Nitrogen
Usage Improve the Carbon content in ductile iron foundry,
specially used in SG Grade.
C+
C+ is used to improve the Carbon content in steel-melting and ductile iron foundry.
The reason for use in Metallurgical Industry is the high fixed Carbon (Mid Sulphur
level) .
Chemical : F.C: 98% min, S: 0.3%
Sizes : 1-5mm, 1-10mm
Properties : High fixed carbon, moderate sulphur
Usage : Improve the carbon content in steel-making
and ductile iron foundry
We can supply different grades of Calcined Anthracite Coal,
specifications are mentioned below
Other specs can be supplied on clients' request
A B
F.C 98% min 93% min
S 0.30% max 0.26% max
Ash 1% max 6% max
V.M 0.5% max 0.5% max
H2O 0.5% max 0.5%max
Sizes 1-5mm, 0-10mm, 5-10mm
We can supply C++ as per the specifications mentioned below :
C++
F.C 98.5% min
S 0.05% max
Ash 0.8% max
V.M 0.8% max
H2O 0.5% max
Sizes 1-5mm, 1-10mm, 1-20mm,1-50mm
Other specs can be supplied on clients' request
BP COAT
Refratory Coatings
Gives Refractive Coating solutions for iron and Steel Foundries. Our speciality is to
service the RIGHT Coatings to foundries considering their current practices
improves Casting Quality, save time, reduce rejections and rework.
WATER BASED COATING- for MOLDS AND CORES
These types of coatings have excellent suspension characteristic, grants low
reactivity to metal oxides and gives excellent performance at high temperatures.
On account of nature of refractories used as fillers, BP COAT (15XX SERIES) is
permeable, allowing the gases generated from the decomposition of binders to
escape across the coating film without building excessive gas pressure. Apart
from giving excellent surface finish, these coatings results in reduced defects,
particularly surface defects like veining, sand burn-in, and metal penetration. We
have different products based on the combination of one of more refractories
mentioned below.
Graphite, Aluminum Silicate, Special Grade Aluminum Silicate, Zircon
SOLVENT BASED COATING - for SAND MOLDS /CORES
These coatings have high refractiveness which prevents sand fusion and metal
penetration at high pouring temperatures. They offer clean peel off resulting in
improve surface finish. Some of the coatings have higher active content and
needs further dilution with BP COAT 2017 which is a blend of organic Solvents. BP
COAT (20xx series) is designed for all type of coating applications like brushing,
spraying and dipping.
We have different products based on the combination of one or more refractories
mentioned below:
Graphite, Aluminum Silicate, Special Grade Aluminum Silicate, Zircon, Magnesite
Specialty Coatings and Chemicals
BP COAT (300X series) is designed for centrifugal casted spun pipes. It gives good
adequate bond to the metal portion. It acts as a barrier between hot metal and
the metallic runner body thereby giving good peel-off
BP COAT (301X Series)
An Alumina based coating for centrifugal casting- vertical and horizontal. It can
also be used in static permanent molds and for liner manufacturers and the
production of centrifugally cast rolls.
BP COAT (41XX series) is a specially formulated parting and cleaning agent for
Green Sand Moulds, Cold Box cores and Shell Cores. The presence of aromatic
hydrocarbon released a thin film on the interface between pattern and mold/ core
and helps to control the sand sticking on the pattern. It can be ujsed by both
spraying and brushing.
C++ & C+
Carburaisers For Carbon Pick Up In Metal (C.I & S.G)

5. 5
Nedularisers - Ferro Silicon Magnesium
Inoculants
BA specialised Ferro Silicon inoculants offer highly effective inoculation for both Grey
and Ductile / S.G. Iron with excellent solubility and enhanced cleanliness.
Si-Inoc
Inoculants are added in liquid cast iron in order to provide the best and consistent
characteristics in the final casting. They are used to control matrix structure and avoid
casting defects.
Application & Effect:
Si-Inoc is a highly effective and readily soluble group of inoculants for Ductile Iron.
The combination of Aluminium and Calcium suppresses carbide formation in thin
sections and improves nodule count and shape.
Sizes:
Available in 0.2 x 0.7 mm, 0.7 x 2 mm, 2 x 6 mm
Packaging:
25 Kg Bags, Drums, Bulk Bags.
Chemical Composition:
Al Ca Si
3.5 - 4.5% 0.5 - 1.0% 70 - 80%
Ba-Inoc
Ferro Silicon Barium Base inoculants are also available with us. Our experienced and
knowledgeable technicians can advise on the best specification and sizing for furnace,
ladle or in stream addition of ferro silicon inoculant.
Application & Effect:
Ba-Inoc is a versatile and durable group of Barium based Ferro Silicon based inoculants
for grey and ductile cast iron. Barium, Aluminium and Calcium gives the alloy an excellent
inoculating effect over a wide range of applications.
Sizes:
0.2 x 0.7 mm, 0.7 x 2 mm, 2 x 6 mm
Packaging:
25 Kg Bags, Drums, Bulk Bags.
Chemical Composition:
Al Ba Ca Si
1.5% max 0.8 - 1.2% 0.8 - 1.2% 65 - 75%
BP INOC
Inoculants
BP FSM
Ferro Silion Magnesium/ Nodulisers
Sr. No. Grade %Mg %Ca %TRE %AI %Si %Fe
1 BP FSM 101 5-6 0.5-1 0.5-1 1.2 max 43-48 Bal.BP
2 FSM102 5-6 1-1.5 1-1.5 ” ” ”
3 BP FSM103 5-6 1.5-2 1.5-2 ” ” ”
4 BP FSM104 5-6 1-1.5 -” ” ”
5 BP FSM201 6-7 0.5-1 0.5-1 ” ” ”
6 BP FSM202 6-7 1-1.5 1-1.5 ” ” ”
7 BP FSM303 6-7 1.5-2 1.5-2 ” ” ”
8 BP FSM401 7-8 2-2.5 2-2.5 ” ” ”
9 BP FSM501 8-10 0.5-1 0.5-1 ” ” ”
10 BP FSM502 8-10 1.5-2 1.5-2 ” ” ”
11 BP FSM503 8-10 1-1.5 - ” ” ”
Ferro Silicon Magnesium is made available by us under specifications Mg: 8-10%,
Ca: 1.5-2 mm, Re: 2-2.5%, Si: 44-50%, AI: 1% and in sizes of 5-15 mm (90% min) and 15-
25mm (90% min). With packaging availability in 25 kg Bag to 1 Mt Jumbo and Bags.
BB Alloys produces high quality nodulising agents which are Ferro Silicon based
alloys with magnesium and other active ingredients. They find wide applications in
the production of SG Iron and speciality grey iron castings for automobile industry.
The use of these nodulising alloys provides a number of distinct advantages in the
nodularisation of ductile iron. These include
 Higher quality castings through maximum nucleation and improved graphic
nodularity
 Fewer as-cast carbides in thin section castings for improved machinability and
reduced heat treatment costs
 Precise control of rare earth levels with a single alloy addition
 Higher levels of ferrite and lower hardness for a given composition and
section size
 Greater tolerance to slightly higher levels of pearlite promoting residual
elements
 Right alloy with controlled Ca and TRE
 Assists in reducing severity of reaction as well as for improving magnesium
recovery
 Alloys analyzed using X-Ray Fluorescence Spectrometer that provides for
consistent finish quality.
Standard Sizes : 2-20 mm, 2-25mm, 5-15 mm, 5-20, 5-25 mm, 10-25, 10-35mm, 15-
25mm, 2-10mm & 1-6mm.
Standard Packing : 25 kgs Bags, 50 kgs Bags, 100 kgs Bags, 250 kgs Bags, 500 kgs
Bags, 1000 kgs Bags, 100 kgs Drums & 250 kgs Drums.

6. 5
About Bhartia Group
For more than 40 years bhartia group is committed with foundries.
Presently the Group core business are
BHARTIA GROUP ACTIVITIES
Steel Shots
We are highly instrumental in providing a premium quality Steel Shots in the market.
Our offered products are manufactured using high grade quality raw material and
advanced technology used in surface treatment. Shot Blasting and Shot Peening,
these products are checked on various levels by quality controllers as per the
predefined industrial quality norms. Clients can avail these products from us at
leading market price
Features; Gloss effect Rust free Retention of original metal color.
Chemical Composition :
Carbon 0.80% - 1.2%
Manganese 0.60% - 1.2%
Silicon 0.50% - Minimum
Sulphur 0.05% Maximum
Phosphorous 0.05% Maximum
Density 7.0 G/CC Minimum
Microstructure Homogeneous tempered Martensite and bainite
Hardness 40&50 HRC
Special : 50-55 HRC
55-60 HRC
Steel Grits
Backed by ultra-modermized infrastructure and sound knowledge of this domain, we
have been able to bring form a quality proven range of steel grits to our clients. As
per the diverse demands of our clients. We are offering these products in various
sizes. To ensure their quality, these are manufactured with high-grade raw material.
We are offering these products in various sizes. To ensure their quality, these are
manufactured with high-grade raw material. We are offering these products to the
clients at market leading price and assure on-time delivery.
Features : Dimensional accuracy Corrosion resistance High strength
Chemical Composition :
Carbon 0.85% - 1.2%
Manganese 0.60% - 1.2%
Silicon 0.50% - Minimum
Sulphur 0.05% Maximum
Phosphorous 0.05% Maximum
Density 7.0 G/CC Minimum
Microstructure Homogeneous tempered Martensite and bainite
Hardness 40&50 HRC
Special : 50-55 HRC
55-60 HRC
BP SS
Steel Shot
MANUFACTURING
LAM Coke
For Green
Sand
Coal
Additives
Alloys
& Fluxes
Steel
Shots
Packaged
Drinking
Water
Medicinal
Gases
Coatings
Commercial
Complexes
Townships around
Nagpur
CONSTRUCTION
Ferro Alloys
Virgin & Noble
Metals
Inoculants Carbon
Raises
High Pressure
Valves
TRADING
Limestone Dolomite
MINING
450 Acres
Cultivated land
Organic
Farming
FARMING
Supermarket
Chain
RETAILS