The document discusses how Saint Clair Systems provides temperature control solutions for fluid dispensing systems. It explains that the key aspects are controlling the temperature at the point of dispense using a temperature sensor located as close as possible, maintaining the temperature as the material moves toward dispense, and using proprietary heat exchanger devices and sizing tools to efficiently move the temperature within the system. The heart of the solution is a self-contained temperature control unit that precisely provides heating and cooling to keep the temperature at dispense within +/- 1 degree.

1. HOW DOES IT WORK?
Saint Clair Systems © All rights reserved
ISO 9001:2016 Certified
1

2. POINT OF DISPENSE: WHERE IT MATTERS
• THE RTD SENSES THE TEMPERATURE IN
THE MATERIAL PATH AS CLOSE TO THE
POINT OF DISPENSE AS PRACTICAL
• THIS ASSURES THAT THE DISPENSE
TEMPERATURE IS ALWAYS AT SETPOINT
• NOTE THAT THE RTD MUST BE IN THE
“TEMPERATURE CONTROL ENVELOPE”
Saint Clair Systems © All rights reserved
ISO 9001:2016 Certified
2

3. MAINTAINING TEMPERATURE: WHERE MOST
SYSTEMS FAIL
• THE FOCUS IS ON CONTROLLING
MATERIAL TEMPERATURE ALL THE WAY
TO THE POINT OF DISPENSE
• THIS ELIMINATES AMBIENT INFLUENCE
• SOLUTIONS AVAILABLE FOR 1K, 2K,
DEAD END, AND RECIRCULATING FLUID
DELIVERY SYSTEMS
Saint Clair Systems © All rights reserved
ISO 9001:2016 Certified
3

4. MOVING TEMPERATURE: WHERE THE WORK
GETS DONE
• EVERY SYSTEM REQUIRES A HEAT
EXCHANGER SYSTEM OF SOME KIND
• PROPRIETARY THERMAL SIZING TOOLS
• PATENTED HEAT EXCHANGE DEVICES
• CONVERT EXISTING SURFACES IN THE
FLUID DISPENSING SYSTEMS INTO HEAT
EXCHANGERS
• MINIMAL IMPACT ON PERFORMANCE
Saint Clair Systems © All rights reserved
ISO 9001:2016 Certified
4

5. CONTROLLING AT THE SOURCE:
OFTEN WASTED EFFORT AND INVESTMENT
• ANY CONTROL ACHIEVED MAY BE LOST
AS THE MATERIAL MOVES TOWARDS
THE POINT OF DISPENSE
• REQUIRED IN SOME SITUATIONS
• CAREFUL SYSTEM ANALYSIS AND
PROPRIETARY THERMAL SIZING TOOLS
TELL YOU IF, WHEN, AND HOW
Saint Clair Systems © All rights reserved
ISO 9001:2016 Certified
5

6. TEMPERATURE CONTROL UNIT (TCU):
THE HEART OF THE SOLUTION
• TOTALLY SELF CONTAINED, BALANCED
AND CLOSED LOOP SYSTEM
• SEAMLESSLY PROVIDES ONLY HEATING
AND COOLING REQUIRED TO HOLD +/-
1° AT THE POINT OF DISPENSE
• CAN COMMUNICATE WITH ANY LINE
HOST CONTROLLER
• VARIOUS SIZES ASSURE YOU PAY ONLY
FOR WHAT YOU NEED
Saint Clair Systems © All rights reserved
ISO 9001:2016 Certified
6