34. WATER JET CUTTERS Width=0.0010-0.0015 inch Pressure=70,000 pounds/square inch Does not cause fusing. May fray and tangle yarns. Suitable for cutting leather and vinyl fabrics.
35. Water jet cutters… Cutting Source : High Pressure Water + Abrasive Table(Cutting Table Unit) - High rigidity and precision feed system driven with X-axis and 2-axis simultaneous driving mechanism, in - gantry structure - Ball-Screw Feed driver enables high precision feeding (Repetitive Accuracy: ¡¾0.03mm, Position Accuracy: ¡¾0.05mm) - Nut-mechanism provides high speed/high accuracy driving - Block Lattice can be replaced according to user requirement, or by - - individual Lattice replacement
41. Plasma cutting is a process that is used to cut steel and other metals (or sometimes other materials like textiles) using a plasma torch. In this process, an inert gas (in some units, compressed air) is blown at high speed out of a nozzle; at the same time an electrical arc is formed through that gas from the nozzle to the surface being cut, turning some of that gas to plasma. The plasma is sufficiently hot to melt the metal being cut and moves sufficiently fast to blow molten metal away from the cut. Plasma can also be used for plasma arc welding and other applications.