Se ha denunciado esta presentación.
Utilizamos tu perfil de LinkedIn y tus datos de actividad para personalizar los anuncios y mostrarte publicidad más relevante. Puedes cambiar tus preferencias de publicidad en cualquier momento.

Begg mechanics

orthodontics dental

  • Inicia sesión para ver los comentarios

Begg mechanics

  1. 1. Begg mechanics
  2. 2. CONTENTSᵿ Introductionᵿ Basics of biomechanicsᵿ Begg mechanics of ᵿ Stage I ᵿ Stage II ᵿ Stage IIIᵿ Conclusionᵿ References26 sep 12 2
  3. 3. INTRODUCTIONᵿ Biomechanics - the study of mechanics as it affects the biology of tooth movementᵿ Burstone deserves a lion’s share of credit for establishing biomechanics as a vital ingredient of Orthodontic Treatment.ᵿ Quick and predictable results with a minimum of tissue damage and maximum patient comfort can only be obtained by carefully planning the application of forces and moments on the teeth26 sep 12 3
  4. 4. Basics of biomechanics Physical properties such as distance, weight, temperature and force are treated mathematically as either SCALARS or VECTORS. SCALARS include temperature and weight, they have a definite magnitude but do not have a direction. They are completely described by their magnitude.26 sep 12 4
  5. 5. ᵿ VECTORS include force, these have both magnitude and direction.ᵿ In case of force, along with magnitude and direction, point of application must be taken into account.FORCE: It is defined as an act upon a body that changes or tends to change the state of rest or motion of the body. Force is a vector it has both magnitude and direction.26 sep 12 5
  6. 6. In case of understanding the magnitude and direction of tooth movement, point of application of force is important26 sep 12 6
  7. 7. Momentᵿ Is defined as a tendency to rotateMOMENT is the product of the force times the perpendicular distance from the point of force application to the center of resistance. M=Fxd It is measured in grams – millimeters. d F F x d(X) = M(X)26 sep 12 7
  8. 8. If a line of action does not pass through the center of resistance the force will produce some rotation. The potential for rotation is measured as moment. The direction of a moment can be determined by continuing the line of action of the force around the center of resistance.26 sep 12 8 F x d(X) = M(X)
  9. 9. A MOMENT may be referred as Rotation Tipping Torquing.26 sep 12 9
  10. 10. MOMENT OF FORCE: When a force is applied at any point other than through the center of resistance in addition of moving the center of resistance in direction of the force, a moment is created. In case of tooth, since it is embedded in the alveolar bone, we cannot apply force directly on Cres, but can apply force on the exposed part of the tooth, which is at a distance from Cres. Therefore with a single force we invariably create a moment called as moment of force.26 sep 12 10
  11. 11.  Moment of force is always relative to point of application. It means moment of a force will be: low relative to a point (point of application) close to line of action high for a point (point of application) with a large perpendicular distance to line of action. In case of Couple moment, it is not relative to any point.26 sep 12 11
  12. 12. CENTER OF ROTATION: It may be defined as a point about which a body appears to have rotated as determined from its initial to final position.A simple method of determining a Center of rotation - Draw the long axis of the tooth in its initial and final positions; we will see that both these lines intersect at a point. This is the point around which the tooth rotates and is called Center of rotation. 26 sep 12 12
  13. 13. Center of rotation could be at the center of resistance, apical or incisal to Cres or at infinity. Its position will determine the type of tooth movement. The moment to force ratio controls the center of rotation for the intended tooth movement.26 sep 12 13
  14. 14. Controlled Tipping: In this situation, crown moves in the direction of force but the root position remains the same or get minimally displaced. Here Center of rotation lies at apex of the root.26 sep 12 14
  15. 15. Uncontrolled tipping:ᵿ In this situation, when force is applied the crown moves in one direction and root moves in the opposite direction. Here Center of rotation lies near to center of resistance.26 sep 12 15
  16. 16. Translation/bodily movt.ᵿ In this situation tooth moves bodily e.g. both crown and root portion of tooth moves bodily in the direction of force. Here Center of rotation lies at infinity.ᵿ All the points in the tooth move by same distance in the same direction in translation.26 sep 12 16
  17. 17. Root movement In this situation, root moves in the direction of force but the crown position remains the same or get minimally displaced. Here Center of rotation lies at incisal edge of the crown.26 sep 12 17
  18. 18. COUPLE: Two equal and opposite, non - collinear forces are called a couple. Couple consists of two forces of equal magnitude, which are parallel to each other but not coincident and they face in opposite direction.The moment of this couple is equal to the magnitude of one of the forces multiplied by the perpendicular distance between the two lines of action of force. 26 sep 12 18
  19. 19. It seems that type of movement exhibited by a tooth is determined by the ratio of the counter-balancing moment produced to the net force that is applied to a tooth . This is called as the moment to force ratio . In terms of direction, the counter-balancing moment is always going to be in the direction opposite the moment of force.26 sep 12 19
  20. 20. M/F Ratio values1. M/F ratio less than 5:1 causes uncontrolled tipping in which the crown and the root apex move in opposite directions.2. M/F ratio between 5:1 and 8:1 causes controlled tipping in which the root apex remains stationary and only the crown moves.3. M/F ratio of 10:1 causes translation. The crown and the root apex move to same extent in the same direction of force.4. M/F ratio of 12:1 causes root movement. The crown remains stationary while only the root moves.26 sep 12 20
  21. 21. Counter-balancing moment Moment of force Force26 sep 12 21
  22. 22. STATE OF EQUILIBRIUMᵿ When an appliance is fitted in the mouth, it assumes a state of equilibrium.ᵿ The active elements in the appliance generate certain forces or moments.ᵿ Other forces or moments arise automatically in the system to balance these forces or moments. Some of them may be beneficial while others may be undesirable.26 sep 12 22
  23. 23. ᵿ For example, tip back bend (like the bite opening bend in Begg appliance) generates a moment which tends to tip the molar tooth crown distally.ᵿ This is balanced by an automatic creation of another moment in the overall system in opposite direction comprising of two forces an intrusive force at the anterior end and on extrusive force on the molar.26 sep 12 23
  24. 24. 26 sep 12 24
  25. 25. Begg MechanicsThere are three basic movements in the Begg mechanotherapy Incisor intrusion - intrusive force magnitude and direction. Tipping of teeth Root uprighting. basic of M/F ratio.26 sep 12 25
  26. 26. Stage Iᵿ Open the anterior biteᵿ Eliminate anterior crowdingᵿ Close anterior spacesᵿ Over correct rotated cuspids and bicuspidsᵿ Over correct the mesiodistal relationship of the buccal segments26 sep 12 26
  27. 27.  Open the anterior bite : Proper amount of bite opening bends or curves in the arch wire. Continuous wearing of Class II (intermaxillary) elastics as required.  Eliminate anterior crowding : Vertical loops between crowded anterior teeth, with bracket areas modified for desired overcorrection.  Close anterior spaces : Plain arch wire with latex elastic or elastomeric chain from cuspid to cuspid.26 sep 12 27
  28. 28.  Over correct rotated cuspids and bicuspids : Rotating springs Elastomeric traction into the arch wire Over correct the mesiodistal relationship of the buccal segments Continuous wearing of class II elastics. Proper bite opening bends in both upper and lower arch wires.26 sep 12 28
  29. 29. Mechanics in Stage I ᵿ The orthodontic environment created during stage I is conducive to rapid movement of anterior teeth under the light forces generated by the arch wires and intermaxillary elastics Stage I arch wire26 sep 12 29
  30. 30. Intrusionᵿ All the six anterior teeth are intruded together in Begg practice.ᵿ The round archwire derives its bite opening force from the anchor bends.ᵿ This force acts on the teeth through the brackets which are placed on the labial surfaces of the incisors, i.e. away from the long axis of the teeth on which the CRes. of the individual teeth are located.26 sep 12 30
  31. 31. ᵿ Depending on the direction of the intrusive force in relation to the long axis of the tooth, the tooth would undergo varying amounts of intrusion (translation) and labial crown-lingual root tipping (rotation).ᵿ Such rotational displacement is generally undesirable (the exception being lingually inclined incisors as in Cl. II div. 2 cases),26 sep 12 31
  32. 32. 26 sep 12 32
  33. 33. ᵿ resisted in the case of upper incisors by using Cl. II elastics during stage I.ᵿ However, the Cl II force not only has a horizontal component for providing this resistance, it also has a vertical component which reduces the magnitude of the intrusive force of the wire.ᵿ Further, the horizontal component of the elastic force affects the direction of the net resultant force. ᵿThus, the interplay between the wire generated intrusive force and the elastic force determines both the magnitude and direction of the net resultant force acting on the teeth.26 sep 12 33
  34. 34. 26 sep 12 34
  35. 35. Consideration of the magnitude of intrusive forceOptimum intrusive force:ᵿ Many authors have suggested optimum intrusive force values ranging from 15-30 g per upper incisor and slightly higher values for upper canines.ᵿ Begg did not specify the precise force values in the Begg bite opening mechanics.26 sep 12 35
  36. 36. ᵿ Later, Kesling (1985) stated that the upper and lower bite opening bends generate intrusive forces of approximately 1.5 oz and 1.2 oz magnitude respectively at the upper and lower midlines.ᵿ The extrusive component of the light Cl. II elastics on the upper incisors is approximately 1 oz.ᵿ Hence the net intrusive force on the upper incisors is approximately 0.5 oz.26 sep 12 36
  37. 37. Role of light Class II elasticsᵿ A net intrusive force of 60 gm can be obtained by a combination of 75 gm intrusive force , as follows :ᵿ Jayade-By using light elastic force for longer periods (from 2 to 5 days), a very light Cl. II force is provided most of the time, since the elastic force diminishes rapidly in the oral environment. Such very low force values do not adversely affect concomitant retraction, because forces in the vicinity of 5 gm are known to be capable of achieving tipping movements.ᵿ Sims has suggested the use of 3/8 ultra light elastics (e.g., “road-runner elastics” of M/s. Ormco) instead of the routinely used 5/16 light elastics (e.g. T.P. yellow elastics). He goes to the extent of continuing the same elastics for 4-5 days, till they break.26 sep 12 37
  38. 38. Consideration of the direction of the resultant forceᵿ Hocevar- teeth respond only to the resultant of the forces, and not to the individual components of the force system.ᵿ The anterior teeth would respond to a resultant of the wire generated intrusive force and the elastic generated retractive force.ᵿ This resultant force should ideally pass through the center of resistance of the upper incisors (which is very difficult to achieve), or at least should lie very close to and directed as much parallel to the long axis of the teeth as possible.26 sep 12 38
  39. 39. The direction and the magnitude of the resultant force both depend upon the interplay between1. The magnitude of the intrusive force – its direction being almost constant i.e. tangential to the arc which the anterior segment of the archwire would subscribe if released from the brackets.2. The magnitude and direction both of the elastic force.26 sep 12 39
  40. 40. ᵿ in case of severely proclined upper anteriors a low magnitude of intrusive force along with light class II force would give a desired resultant force, passing palatal to Cres, this will help correcting the proclination of incisors .ᵿ Once the inclination of upper incisors is corrected then the class II elastics force is reduced helping in keeping the resultant force close to Cres . 45gms 60 gms26 sep 12 40 60gms 30gms
  41. 41. ᵿ In Class II Division 2 cases , where the upper centrals are retroclined , only intrusive force should be used (Avoiding the Class II elastics) The intrusive force acts labial to Cres and corrects the retroclination. Once the inclination is corrected then we can use Class II elastics . 40gms 50gms 20gms26 sep 12 41
  42. 42. ᵿ Modifying the force system to achieve simultaneous intrusion and retraction using Class I elastic instead of Class II elastics was first illustrated by Shin Yang Liu (1981). In this arrangement the vectors are in the same direction as the elastic pull and the archwire force are unidirectional and hence synergistic26 sep 12 42
  43. 43. Arch wire designVARIOUS TYPES OF BITE OPENING BENDS: The Anchor bend the conventional bite opening bend causes more intrusion of canines while the lateral and central incisors progressively lag behind. A Gable bend causes a progressively more intrusion of central and lateral incisor, as compared to canine26 sep 12 43
  44. 44.  Swain modification: Mild gingival curve is incorporated in the anterior section, from mesial of cuspid to mesial of other side cuspid.26 sep 12 44
  45. 45. Mechanics of tippingᵿ Reitan. -Generally, uncontrolled tipping is undesirable because it leads to root resorption.There is more resorption when uncontrolled tipping is in labio-lingual direction.ᵿ Intrusion and tipping are intimately related not only because they are carried out simultaneously but also, when both are balanced judiciously it help in overcoming uncontrolled tipping of incisors.26 sep 12 45
  46. 46. ᵿ This is achieved by manipulating the intrusive force generated by wire and retractive component of force from the Class II elastics.ᵿ Both the anchor bend in the wire and class ii elastics produce moments in the same labio-lingual plane but act in opposite directions.26 sep 12 46
  48. 48. ᵿ The intrusive force produces crown labial-root lingual moment e.g.. anticlockwise moment on the upper anteriors.ᵿ While the retractive force produced the Class II elastics generates clockwise moment e.g. crown lingual-root labial momentThe moment from the intrusive force can act as the counter balance moment against the moment produced by the elastic force. The ratio of the former to the retraction component of the elastic force is the M/F ratio which governs the type of tipping while retracting the anterior teeth.26 sep 12 48
  49. 49. ᵿ The most important consideration is to keep light Class II elastic and use adequate amount of intrusive force so that correct M/F ratio (8:1) is obtained to have a controlled tipping.26 sep 12 49
  50. 50. PREVENTINGUNCONTROLLED TIPPING OF LOWER INCISORSThe flaring can be avoided by two means;1. Minimizing the clockwise force moment by reducing the intrusive force or by placing the brakets much gingivally.2. Secondly, cinching tightly the distal ends of the arch wire.26 sep 12 50
  51. 51. 26 sep 12 51
  52. 52. ᵿ In case of severely lingually tipped lower anteriors, Cres will be lying buccal to the point of application of the intrusive force generated by the anchor bend so there is more chances to tip the lower anteriors more lingually. ᵿ So in that case we give a By pass arch wire in order to upright26 sep 12 the lower incisors . 52
  53. 53. 26 sep 12 53
  54. 54. BEGG STAGE IIThe sole or main purpose of II stage is closure of extraction spaces.ᵿ The extraction space can be closed by either retraction of the anteriors or protraction of the posteriors or combination of both.During Stage II all the corrections achieved during Stage I should be maintained26 sep 12 54
  55. 55.  Maintain Edge to Edge relationship of anterior teeth: Reduce the anchor bend in arch wire and wear intermaxillary elastics as required Maintain anterior space closure : To give cuspid ties either by elastomeric rings or steel ligatures. To maintain overcorrected or normal mesiodistal molar relationship : Keep wearing of intermaxillary elastics as required during posterior space closure.26 sep 12 55
  56. 56. BIOMECHANICS OF STAGE IIᵿ The anchor bend should be sufficient as to produce a counter clockwise moment greater than the clockwise moment produced by the Class I and Class II elastics in upper arch.ᵿ The M/F ratio should be sufficient or around 8/1 so as to have a controlled tipping movement.If anticlockwise moment is less than clockwise moment produce by Class I and Class II elastics on upper anterior, then M / F ratio will less and it will uncontrolled tipping of upper anterior teeth.26 sep 12 56
  57. 57. “Class I Elastic” Forces INTRUSION FORC CLASS I ELASTIC FORCE At the end of Stage II26 sep 12 57
  58. 58. ᵿ in lower arch the clockwise moment should be greater than anticlockwise moment produced by Class I elastics. So as to have controlled tipping movementᵿ Normally 0.016 upper and lower arch wires with reduced bite opening bends are used.ᵿ Some authors say use of heavy arch wire 0.020” as it will function as retainers to maintain arch form and bite opening achieved during stage I.26 sep 12 58
  59. 59. ᵿ Dr. Swain advocated the use of lingual attachments on molars and cuspids to allow the use of lingual space closing elastics to aid the traditionally used buccal vector of intra maxillary elastic force during stage II known as half strength elastics. Two distinct advantages  It gives a better positional control over the anchor molar thus obviating the need for a mandatory compensate toe in bend when using elastic force only from buccal side.  Closure of extraction spaces becomes easier.26 sep 12 59
  60. 60. 26 sep 12 60
  61. 61. BRAKING MECHANICSᵿ When further retraction of anterior teeth into the remaining extraction space is deemed undesirable clinically , then the posterior teeth are brought forward, that is posterior teeth are mesialized.ᵿ Mostly in extraction of 5’s casesᵿ To achieve mesialization of posterior teeth heavy elastic forces are required with concurrent use of brakes in the anterior region.26 sep 12 61
  62. 62. ᵿThe brakes- reverse the anchorage site- from posterior to anterior segmentᵿ Permitting only the bodily movement of anterior teeth, instead of allowing them the freedom of tippingᵿ the direction of resultant force should pass through the center of resistance of anterior teeth (or close to it).ᵿ Therefore, substituting Class II elastic forces by Class I elastic forces would orient the resultant force more vertically passing nearer to the center of resistance of anterior teeth.26 sep 12 62
  63. 63. Various brakes are: Breaking springs (passive uprighting springs) Reverse torque to incisor roots (Udder arch and MAA) Using Angulated-T pins Passive Uprighting Springs UDDER ARCH26 sep 12 63
  64. 64. Stage III BEGGᵿ The third stage of Begg treatment involves predominantly root movements in a labiolingual or mesiodistal direction.ᵿ A doubt is expressed by some edgewise operators as to how it is possible to obtain a high M/F ratio required for the root movements using the Begg torquing auxiliary and uprighting springs.ᵿ However, a careful scrutiny of the forces generated by the torquing auxiliary and the uprighting springs in relation to the light Cl.II elastic force will help in dispelling this apprehension.26 sep 12 64
  65. 65. Objectives of stage III1.Maintaining all the corrections achieved during first and second stages.2.Achieve desired axial inclinations of all the teeth.26 sep 12 65
  66. 66. Stage III arch-wire26 sep 12 66
  67. 67. 1. Maintaining all the corrections achieved during stages I & II. Mesiodistal molar relationship maintained through the wearing of class II or class III elastics as required. Original spaces between anterior teeth are prevented from recurring by tying intermaxillry circles to the cuspid brackets with steel ligature wire. Over corrections of cuspids are maintained by engaging the brackets which have been offset on the teeth.26 sep 12 67
  68. 68.  Over corrections of bicuspids are held by replacing elastic threads with steel ligature ties. Over corrections of central and lateral incisors are maintained through the continued use of bayonet bends in the arch wires. Opening of a deep anterior overbite is maintained through the continued use of bite-opening bends and class II or class III elastics.26 sep 12 68
  69. 69.  The correction of posterior crossbites is maintained by modifying the archwire or by wearing of cross elastics as necessary. Posterior spaces kept closed by bending the distal ends of the arch wire around the buccal tubes. Arch form and overbite correction maintained by using heavier (0.018 to 0.025) main archwire.26 sep 12 69
  70. 70. 2. Achieve desired axial inclinations of the teeth. Changes in the mesiodistal inclinations of teeth are accomplished by the use of individual root-tipping springs. Lingual or labial root torque is applied to anterior teeth through the application of torqueing auxilaries.26 sep 12 70
  71. 71. Auxiliaries used during stage IIIThe two main auxiliaries:ᵿ Individual Root Springs or Mesio distal uprighting Springs.ᵿ Torqueing auxiliaries.26 sep 12 71
  72. 72. Torqueing Auxiliariesᵿ To torque roots of the maxillary anterior teeth lingually.ᵿ Torqueing is nearly always necessary (especially with upper incisors) in mild discrepancy cases that require extraction of the four first premolars i,e in cases having only a mild excess of tooth substance relative to jaw size.ᵿ This is because crowns of the incisors tipped back a long way lingually to close the extraction spaces.26 sep 12 72
  73. 73. Spring - Pinᵿ A problem inherent in all uprighting springs is that, when engaged and under tension, the coil presses against the gingival edge of the beacket.ᵿ If arch wire is not safely tied into the slot of the bracket, this force from the coils can cause the bracket to move away from the arch wire, with a subsequent elongation of the tooth.26 sep 12 73
  74. 74. ᵿ As a solution to this problem authors have invented, Spring Pin.ᵿ A Combination of a Lock Pin and an Uprighting Spring.ᵿ The leg of the pin portion passes lingual to the arch wire and the tail fits labial to it in the space in the bracket that normaly accepts the lock pin.26 sep 12 74
  75. 75. Mechanics of stage IIIᵿ The torquing auxiliary - labio-lingual root movements andᵿ the uprighting springs - mesiodistal root movement generate …..reciprocal reaction in all the three planes of space which when not properly controlled, result in complication: 1. The lingual root-torquing auxiliary also tends to cause labial crown movements, extrusion of the anteriors and intrusion of posteriors, and buccal crown movement of posteriors.26 sep 12 75
  76. 76. 2. The labial root torquing auxiliary will have effect in opposite direction. ᵿThe uprighting springs for distal root movement also have similar effects as the lingual root-torquing auxiliary in all the three directions. The vertical and sagittal reactions are easily appreciated. ᵿ Reactions in the transverse direction arise because of the vertical forces acting away from the centre of resistance of posterior teeth.26 sep 12 76
  77. 77. ᵿ The sagittal forces are easily appreciated.ᵿ The uprighting springs on the anterior teeth for distal root movement and the torquing auxiliary for palatal root torque, both have an extrusive effect on the anteriors and an intrusive effect on the molars.ᵿ The intrusive effect on the molars is responsible for a transverse buccal rolling action on the molars. Such undesired reactions should be carefully monitored and neutralized.26 sep 12 77
  78. 78. ᵿ The reciprocal mesial crown moving forces are commonly reisted by:1. Cinching the distal ends of archwires2. Class II elastics26 sep 12 78
  79. 79. Forces generated (in grams) by the commonly used fourspur and two spur torquing auxiliaries with 5 mm spur length. Wire Horizontal Vertical Lateral Ce ntr al 010 14 18 11 4 Spurs 012 26 30 19 014 48 53 23 016 96 103 77 010 22 14 2 Spurs 012 42 28 014 64 28 016 112 7826 sep 12 79
  80. 80. ᵿ The auxiliary commonly used is the one made in 0.012 premium plus wire.ᵿ Although the forces produced by this auxiliary are low, the moments generated by these forces are sufficient because the moment arm is much greater in a torquing auxiliary than in a rectangular archwire twisted for torquing effect.26 sep 12 80
  81. 81. The forces generated by the uprighting springs made from different wires Activation 75o 60o 45o 25o Minispring 142.5 97.5 72.5 < 37.5 0.000 (s) 137.5 82.5 52.5 < 37.5 0.010 (s) 157.5 97.5 57.5 < 37.5 0.012 (s) 282.5 162.5 112.5 57.5 0.012 (p) 257.5 157.5 107.5 57.5 0.014 (sp+) 387.5 297.5 197.5 97.5 0.016 (p) 437.5 307.5 207.5 107.5 Spring pin 787.5 637.5 487.5 287.526 sep 12 81
  82. 82. ᵿ As Nikolai has pointed out, greater moments are required for the mesio-distal root movements than for the bucco-lingual root movements, since holding force for the former is greater due to the mesio-distal crown contact.ᵿ Thus the forces produced by the torquing auxiliary are smaller than the forces generated by the uprighting springs for the same individual teeth.26 sep 12 82
  83. 83. Some other torquing auxiliary designᵿ Single root torquing auxiliary proposed by Keslingᵿ Reciprocal torquing auxiliary (SPEC) designᵿ Reverse torquing auxiliary for controlling the roots of canines or premolarsᵿ Buccal root torque on molarsᵿ Labial root torque only on lateral incisor26 sep 12 83
  84. 84. Conclusionᵿ A common misconception is that the application of biomechanical properties would make the begg technique too cumbersome. On the contrary, biomechanically designed appliance gives a predictable tooth movement, optimal biologic tissue response and minimal side effects.ᵿ In the lighthearted note - One can say that on the average, an orthodontist spends half the treatment time on problems presented by the patient and other half on problems resulting from treatment side effects ᵿOrthodontics could be in our hand if we use efficient biomechanics 26 sep 12 84
  85. 85. Referencesᵿ Vijay P.Jayade. Refined Begg for modern times.ᵿ Nanda Ravindra. Biomechanics in clinical orthodontics.Philadelphia: W.B Saunders Company ;1997ᵿ Begg, P. R.: Begg orthodontic theory and technique, Philadelphia, 1965, W. B. Saunders Company.ᵿ Swain, B. F., and Ackerman, J. L.: An evaluation of the Begg technique, AM. J. ORTHOD. 55: 668-687, 1969.ᵿ Hocevar RA: Orthodontic force systems: Technical refinements for increased efficiency. AM J ORTHOD 81: 1-11, 1982.ᵿ Hocevar RA: Understanding, planning, and managing tooth movement: Orthodontic force system theory. AM J ORTHOD 80: 457-477, 1981.ᵿ Reitan K: Tissue behavior during orthodontic tooth movement. AM J ORTHOD 46: 881-900, 1960.26 sep 12 85