SlideShare una empresa de Scribd logo
1 de 4
Descargar para leer sin conexión
THINKING BEYOND THE OBVIOUS




                                                                                   Deleg
                                                                                   can cl ates
                                                                                         aim
                                                                                   2 CPD
                                                                                   point
                                                                                           s




        Pressure Vessel Applications,
        Operations and Maintenance
                                             WORKSHOP

                                  30 - 31 October 2012
                                Global Prospectus Training Centre,
                                 366 Pretoria Avenue, Randburg

Endorsed and accredited by Southern African Asset Management Association (SAAMA)
                                                            Ref no: SAAMA00469




               SETA Accreditation No. 2502
OVERVIEW
The design of pressure vessels is a specialist task that requires a thorough understanding of topics such as: strength of materials,
stress analysis and relevant design codes. Pressure vessel design also necessitates a logical, planned approach to the documentation
of all relevant calculations as in many cases; these design calculations can be quite extensive. Given that pressure differential is
dangerous and that fatal accidents have occurred in the development and operation of pressure vessels, standards have been
established and applied to ensure safety governing the design, fabrication, and inspection of boilers and pressure vessels such as
the ASME BPVC Section VIII Div. 1 (Code).

It is therefore appropriate that South African engineers should be provided with an opportunity to formally receive instruction
in the area of pressure vessel design in the context of the relevant South African standard. This 2-day intensive practical training
course will offer insight into the requirements outlined in designing, operating and maintaining pressure vessels. Delegates will
be awarded with an opportunity to understand how to apply the standard to common scenarios they face in the design and
fabrication of the equipment they work with.




                                                                   WORKSHOP OBJECTIVES
At the completion of this workshop, each delegate should be able to:
•   Thoroughly understand how strength of materials theory forms the basis of all international pressure vessel codes
    and standards
•   Understand the most commonly used terms and jargon within the area of pressure vessel design
•   Recognize and compare the different methods of stress analysis available for pressure vessel design purpose
•   Appreciate the intent and instruction contained within the most commonly employed clauses of the Code and the
    South Africa standard
•   Have a basic understanding of topics relating to: Vessel Manufacturing Methods, Vessel Testing, Marking and Qualification,
    and Relief Devices.



                                                                     WHO SHOULD ATTEND
•       Process Design Engineers                                                                 •     Mechanical Engineers
•       Process Engineers                                                                        •     Technical Engineers
•       Head of Maintenance or Operations                                                        •     Operations Engineers
•       Project Engineers                                                                        •     Production Engineers
•       Line Managers and Supervisors                                                            •     Plant Engineers
•       Maintenance Technicians                                                                  •     Consulting Engineers
•       Maintenance Engineers                                                                    •     Pump Sales Representatives
•       Inspections Engineers                                                                    •     Anyone who needs to select, specify, commission, install
•       Reliability Engineers                                                                          and/or maintain pumping equipment



                                                                       EXPERT FACILITATOR

Ntozelizwe Benjamin Mqenebe
Ntozelizwe Benjamin Mqenebe, is a seasoned reliability and maintenance consultant and advisor with 8 years of solid experience in
the field. He had been invited in different maintenance and reliability trainings in South Africa, Nepal, India and USA. His portfolio of
maintenance trainings include Maintenance Management courses on TPM, Lubrication, Tribology, Condition-Based Maintenance,
RCM, RCFA, Planned Maintenance, World Class Maintenance Management, The 12 Disciplines, Oil Contamination Control, Life Cycle
Management, Maintenance Indices and KPI’s, Maintenance Strategies and much more. Ntozelizwe previously worked with Umgeni
Water, as Engineer-In Training, System Administrator and later Reliability Engineer. He worked for Engineering & Projects Company
as their Mechanical Engineer on the Ghana Tarkwa CIL Project, and later on the Namibian Langer Heinrich Uranium Project. He
joined VWS Envig on the RBMR project and Madagascar project in Ambatovy. Worked as a Systems Engineer for Port Elizabeth
Metropolitan Municipality on their Operations & Maintenance module for EDAMS. He joined Arcelormittal Newcastle (Sinter Plant)
as a Senior Engineer responsible for Reliability and Maintenance services. Ntozelizwe is currently working for Lizwe Engineers as
the CEO since 2009.




    GLOBAL PROSPECTUS TRAINING (PTY) LTD.                                                                         Chief Executive O er - Dhevaraj Pillay
    Johannesburg -     Tel: +27 11 781 6222 Fax: +27 11 781 6044 Marketing - m2@globalprospectus.co.za            Auditors - Russell Bedford SA (Jhb) Inc.
    Pietermaritzburg - Tel: +27 33 391 4229 Fax: +27 33 391 5722 Design - www.designmaster.co.za (071 018 8355)   Legal - DA Morris & Associates
DAY 1                                                                                     DAY 2



         08:00 – 08:20            Early morning refreshments                                          08:00 – 08:20         Early morning refreshments
                                  and registration
                                                                                                      08:20 – 08:30         Opening address
         08:20 – 08:30            Opening address
                                                                                                      08:30 – 10:30     Loads, Shells & Joints Continued ...
         08:30 – 10:30      Background information                                                    •      Advanced shell design – pressure and
         •      Industry terms and jargon defined                                                            combined loadings
         •      Examples of pressure vessel failures                                                  •      Advanced shell design – stiffening rings
         •      Tensile tests and stress-stain diagrams                                               •      End design – thickness, shape, attachment
         •      Stresses: Primary, secondary, peak and allowable                                      •      Design of doors, stays and manholes, etc.
         •      Failure theories                                                                      •      Worked example problems
         •      Thin walled versus thick-walled pressure vessels
         •      Roark’s, Shigley’s and Timoshenko’s formulas                                          10:30 – 10:45         Mid-morning Break
                versus Finite Element (FEA) methods
         •      Background information to ASME Code
                and its rules                                                                         10:45 – 11:30         Openings, Connections,
         •      Vessel classes                                                                                              Branches & Supports
         •      Worked example problems                                                               •       Design of openings – un-reinforced and reinforced
                                                                                                      •       Design of connections and branches
         10:30 – 10:45            Mid-morning Break                                                   •       Design of vessels supports
                                                                                                      •       Worked example problems

         10:45 – 12:45        Layout
         •      Pressure vessel parts and components: Shell, head,                                    11:30 – 12:45      Ancillaries
                legs, skirt, internals, etc.                                                          •      Level gauges
         •      Pressure Vessel Orientation                                                           •      Arrestors
         •      Examples of industry standard pressure vessels for                                    •      Relief valves
                various selected applications
         •      Worked example problems                                                               12:45 – 13:45         Lunch Break

         12:45 – 13:45             Lunch Break                                                        13:45 – 15:00     Manufacturing
                                                                                                      •      Pressure vessel fabrication
         13:45 – 15:00      Materials                                                                 •      Pressure vessel inspection
         •      Materials selection and specification                                                 •      Testing and documentation
         •      Commonly used materials and their applications
         •      Material identification                                                               15:00 – 15:15         Afternoon Break
         •      Materials testing
         •      Corrosion allowances
                                                                                                      15:15 – 16:45         ASME BPVC Section VIII Div. 1
         15:00 – 15:15             Afternoon Break                                                                          Comparison with AS 1210
                                                                                                      •       ASME pressure vessel code history and structure
                                                                                                      •       A brief summary of design rules and equations
         15: 15 – 16:45      Loads, Shells & Joints                                                   •       A brief comparison between ASME BPVC
         •       Design pressure, temperature, load factors and                                               Section VIII Div. 1 and AS1210
                 combined loadings                                                                    •       A basic worked example problem to ASME BPV
         •       Joint Design – Welded, Brazed, Soldered, etc.                                                Section VIII Div. 1
         •       Basic shell design – internal pressure only
         •       Advanced shell design – pressure and                                                 16:45                 End of Day Two
                 combined loadings
         •       Worked example problems

         16:45                    End of Day One




GLOBAL PROSPECTUS TRAINING (PTY) LTD.                                                                         Chief Executive O er - Dhevaraj Pillay
Johannesburg -     Tel: +27 11 781 6222 Fax: +27 11 781 6044 Marketing - m2@globalprospectus.co.za            Auditors - Russell Bedford SA (Jhb) Inc.
Pietermaritzburg - Tel: +27 33 391 4229 Fax: +27 33 391 5722 Design - www.designmaster.co.za (071 018 8355)   Legal - DA Morris & Associates
Pressure Vessel
                                                                    Applications, Operations                                                                                    ONLY
                                                                    and Maintenance
                                                                                                                                                                         R749
                                                                    30 - 31 October 2012                                                                                    Per D
                                                                                                                                                                                 eleg
                                                                                                                                                                                                    0
Registration Form                                                   Global Prospectus Training Centre,                                                                        ex. VA ate,
                                                                                                                                                                                    T.
                                                                    366 Pretoria Avenue, Randburg
GPW                      Marketing


   Fax Completed Registration Form To: +27 11 781 6044

Company Name:
Type of Business:
Address:
Tel:                                                             Fax:                                                              VAT Number:


Delegate 1:
Position:                                                                                        E-Mail:

Delegate 2:
Position:                                                                                        E-Mail:
Delegate 3:

Position:                                                                                        E-Mail:
Delegate 4:
Position:                                                                                        E-Mail:
Delegate 5:

Position:                                                                                        E-Mail:

AUTHORISATION:              Signatory must be authorised to sign on behalf of Company
                                                                                                          CREDIT CARD




Name:                                                                                                                   Cardholder’s Name:
                                                                                                            DETAILS




Position:                                                                                                               Credit Card Number:

Signature:                                             Date:                                                            CVC No:                                            Expiry Date:

PAYMENT METHODS
1. Bank Transfer - Global Prospectus Training (PTY) Ltd.                             2. Credit card - Please fill in your credit card details above
                   First National Bank: Randburg                                     3. Cheques - Made Payable to: Global Prospectus Training (PTY) Ltd.
                   Account Number: 62109 270372
                   Branch Code: 254005


TERMS & CONDITIONS
The following terms and conditions will apply:                                                                                Substitutions
   Payment is required in full 5 days from date of invoice                                                                      Delegates must inform Global Prospectus Training (PTY) Ltd in writing
   All payments to be made directly to Global Prospectus Training (PTY) Ltd.                                                    of any substitutions.
   No seats will be reserved, unless Global Prospectus Training (PTY) Ltd. receives a signed registration form.                 There is no charge for substitutions.
   Global Prospectus Training (PTY) Ltd. reserves the right, due to circumstances beyond our control, to change                 Global Prospectus Training (PTY) Ltd will not be held liable for incorrect
   speakers, program content, date & venue.                                                                                     Delegate details on Certi      s, etc. in the event of substitutions being
   The signed registration form is a legally binding contract.                                                                  made on the day of the conference. In the event of Global Prospectus
                                                                                                                                Training (PTY) Ltd having to cancel or postpone an event due to circum-
Cancellations                                                                                                                   stances beyond our control, delegates will be issued with a credit voucher,
All cancellations will be subject to approval by the management of Global Prospectus Training (PTY) Ltd.
                                                                             -                                                  which may be used at another of our events.
All cancellations made 7 days prior to date of the above mentioned event will be subject to a 50% cancellation fee.
Cancellations made within 7 days of date of the above mentioned event, will be subject to a 100% cancellation fee.
                                                                             -                                      Global Prospectus Training (PTY) Ltd will not be held liable for travel and accommoda
                                                                                                                                                                                                              -
The will be no refunds or credit vouchers.                                                                          tion costs. The conference fee includes: conference material, lunches and refreshments, but
                                                                                                                    excludes travel & accommodation.




GLOBAL PROSPECTUS TRAINING (PTY) LTD.                                                                                               Chief Executive O er - Dhevaraj Pillay
Johannesburg -     Tel: +27 11 781 6222 Fax: +27 11 781 6044 Marketing - m2@globalprospectus.co.za                                  Auditors - Russell Bedford SA (Jhb) Inc.
Pietermaritzburg - Tel: +27 33 391 4229 Fax: +27 33 391 5722 Design - www.designmaster.co.za (071 018 8355)                         Legal - DA Morris & Associates

Más contenido relacionado

La actualidad más candente

Asme pcc 2 repair leaks
Asme pcc 2 repair leaksAsme pcc 2 repair leaks
Asme pcc 2 repair leaksGreg Kilaton
 
7 quiz prestudy guide 1
7 quiz prestudy guide 17 quiz prestudy guide 1
7 quiz prestudy guide 1Achmad Walid
 
Pr 1047 well integrity maintenance
Pr 1047 well integrity maintenancePr 1047 well integrity maintenance
Pr 1047 well integrity maintenanceLawrence Kwende
 
PetroSync - API 579 Fitness for Service
PetroSync - API 579 Fitness for ServicePetroSync - API 579 Fitness for Service
PetroSync - API 579 Fitness for ServicePetroSync
 
API 570 Piping and Pipeline Inspectors Preparatory Course
API 570 Piping and Pipeline Inspectors Preparatory CourseAPI 570 Piping and Pipeline Inspectors Preparatory Course
API 570 Piping and Pipeline Inspectors Preparatory CoursepetroEDGE
 
Tasha ramisetti new resume 2015
Tasha ramisetti new resume 2015Tasha ramisetti new resume 2015
Tasha ramisetti new resume 2015Tasha Ramisetti
 
ARAVINTH(CV Aramco Approved)
ARAVINTH(CV Aramco Approved)ARAVINTH(CV Aramco Approved)
ARAVINTH(CV Aramco Approved)Aravinth Jai
 
Webinar well integrity management Webinar
Webinar well integrity management WebinarWebinar well integrity management Webinar
Webinar well integrity management WebinarPetroTeach1
 

La actualidad más candente (15)

Asme pcc 2 repair leaks
Asme pcc 2 repair leaksAsme pcc 2 repair leaks
Asme pcc 2 repair leaks
 
Pressure Vessel Design
Pressure Vessel DesignPressure Vessel Design
Pressure Vessel Design
 
7 quiz prestudy guide 1
7 quiz prestudy guide 17 quiz prestudy guide 1
7 quiz prestudy guide 1
 
5 api-574-rev-002
5 api-574-rev-0025 api-574-rev-002
5 api-574-rev-002
 
Pr 1047 well integrity maintenance
Pr 1047 well integrity maintenancePr 1047 well integrity maintenance
Pr 1047 well integrity maintenance
 
PetroSync - API 579 Fitness for Service
PetroSync - API 579 Fitness for ServicePetroSync - API 579 Fitness for Service
PetroSync - API 579 Fitness for Service
 
Ffs assessment
Ffs assessmentFfs assessment
Ffs assessment
 
API 570 Piping and Pipeline Inspectors Preparatory Course
API 570 Piping and Pipeline Inspectors Preparatory CourseAPI 570 Piping and Pipeline Inspectors Preparatory Course
API 570 Piping and Pipeline Inspectors Preparatory Course
 
Tasha ramisetti new resume 2015
Tasha ramisetti new resume 2015Tasha ramisetti new resume 2015
Tasha ramisetti new resume 2015
 
ARAVINTH(CV Aramco Approved)
ARAVINTH(CV Aramco Approved)ARAVINTH(CV Aramco Approved)
ARAVINTH(CV Aramco Approved)
 
R.Krishna Raj Sr. QC_Inspector-19-04-16
R.Krishna Raj Sr. QC_Inspector-19-04-16R.Krishna Raj Sr. QC_Inspector-19-04-16
R.Krishna Raj Sr. QC_Inspector-19-04-16
 
Ipea api579
Ipea api579Ipea api579
Ipea api579
 
CV - Prasath.V.R
CV - Prasath.V.RCV - Prasath.V.R
CV - Prasath.V.R
 
Asme codes
Asme codesAsme codes
Asme codes
 
Webinar well integrity management Webinar
Webinar well integrity management WebinarWebinar well integrity management Webinar
Webinar well integrity management Webinar
 

Similar a Pressure vessels

Ken Edgar CV
Ken Edgar CVKen Edgar CV
Ken Edgar CVKen Edgar
 
Pg Global Presentation 17th March 2011docx
Pg Global Presentation  17th March 2011docxPg Global Presentation  17th March 2011docx
Pg Global Presentation 17th March 2011docxralphowen
 
Astute Crewing Up 0.6
Astute Crewing Up 0.6Astute Crewing Up 0.6
Astute Crewing Up 0.6bi22et
 
INTRODUCTION TO OFFSHORE DRILLING AND PRODUCTION FACILITIES
INTRODUCTION TO OFFSHORE DRILLING AND PRODUCTION FACILITIESINTRODUCTION TO OFFSHORE DRILLING AND PRODUCTION FACILITIES
INTRODUCTION TO OFFSHORE DRILLING AND PRODUCTION FACILITIESpetroEDGE
 
Youssef Altaweel- Resume -05-07-2016-
Youssef Altaweel- Resume -05-07-2016-Youssef Altaweel- Resume -05-07-2016-
Youssef Altaweel- Resume -05-07-2016-Youssef Altaweel
 
PG Global Presentation
PG Global PresentationPG Global Presentation
PG Global Presentationhaynesee
 
Corrosion Engineering 2012
Corrosion Engineering 2012Corrosion Engineering 2012
Corrosion Engineering 2012Ola Odejayi
 
Itp Engineeringv2 (2)
Itp Engineeringv2 (2)Itp Engineeringv2 (2)
Itp Engineeringv2 (2)ccueto86
 
Wellington Shumba CV projects
Wellington Shumba CV projectsWellington Shumba CV projects
Wellington Shumba CV projectsweshumba
 
JDR Corporate Presentation
JDR Corporate PresentationJDR Corporate Presentation
JDR Corporate Presentationcfranceschini
 
Overiew of simmco 8 12-12 - copy
Overiew of simmco 8 12-12 - copyOveriew of simmco 8 12-12 - copy
Overiew of simmco 8 12-12 - copysimmco
 
ANTHONY PAINE - cv2016
ANTHONY PAINE - cv2016ANTHONY PAINE - cv2016
ANTHONY PAINE - cv2016Anthony Paine
 
Construction Engineer Piping ,Tower crane - Anoop
Construction Engineer Piping ,Tower crane - AnoopConstruction Engineer Piping ,Tower crane - Anoop
Construction Engineer Piping ,Tower crane - AnoopAnoop Ramachandran
 
Allen Schmitgen pushkar resume'
Allen Schmitgen pushkar resume'Allen Schmitgen pushkar resume'
Allen Schmitgen pushkar resume'Allen Schmitgen
 

Similar a Pressure vessels (20)

Roevin
RoevinRoevin
Roevin
 
Ken Edgar CV
Ken Edgar CVKen Edgar CV
Ken Edgar CV
 
Pg global presentation 21st April 2011docx
Pg global presentation  21st April 2011docxPg global presentation  21st April 2011docx
Pg global presentation 21st April 2011docx
 
Pg Global Presentation 17th March 2011docx
Pg Global Presentation  17th March 2011docxPg Global Presentation  17th March 2011docx
Pg Global Presentation 17th March 2011docx
 
Astute Crewing Up 0.6
Astute Crewing Up 0.6Astute Crewing Up 0.6
Astute Crewing Up 0.6
 
INTRODUCTION TO OFFSHORE DRILLING AND PRODUCTION FACILITIES
INTRODUCTION TO OFFSHORE DRILLING AND PRODUCTION FACILITIESINTRODUCTION TO OFFSHORE DRILLING AND PRODUCTION FACILITIES
INTRODUCTION TO OFFSHORE DRILLING AND PRODUCTION FACILITIES
 
Youssef Altaweel- Resume -05-07-2016-
Youssef Altaweel- Resume -05-07-2016-Youssef Altaweel- Resume -05-07-2016-
Youssef Altaweel- Resume -05-07-2016-
 
PG Global Presentation
PG Global PresentationPG Global Presentation
PG Global Presentation
 
Corrosion Engineering 2012
Corrosion Engineering 2012Corrosion Engineering 2012
Corrosion Engineering 2012
 
SUDARSAN CAUSHIK CV
SUDARSAN CAUSHIK CVSUDARSAN CAUSHIK CV
SUDARSAN CAUSHIK CV
 
Itp Engineeringv2 (2)
Itp Engineeringv2 (2)Itp Engineeringv2 (2)
Itp Engineeringv2 (2)
 
Concept to production - "The challenges of PM in the RNLI"
Concept to production - "The challenges of PM in the RNLI"Concept to production - "The challenges of PM in the RNLI"
Concept to production - "The challenges of PM in the RNLI"
 
STEVEN cv
STEVEN cvSTEVEN cv
STEVEN cv
 
Wellington Shumba CV projects
Wellington Shumba CV projectsWellington Shumba CV projects
Wellington Shumba CV projects
 
JDR Corporate Presentation
JDR Corporate PresentationJDR Corporate Presentation
JDR Corporate Presentation
 
Overiew of simmco 8 12-12 - copy
Overiew of simmco 8 12-12 - copyOveriew of simmco 8 12-12 - copy
Overiew of simmco 8 12-12 - copy
 
Instrument engineer CV
Instrument engineer CVInstrument engineer CV
Instrument engineer CV
 
ANTHONY PAINE - cv2016
ANTHONY PAINE - cv2016ANTHONY PAINE - cv2016
ANTHONY PAINE - cv2016
 
Construction Engineer Piping ,Tower crane - Anoop
Construction Engineer Piping ,Tower crane - AnoopConstruction Engineer Piping ,Tower crane - Anoop
Construction Engineer Piping ,Tower crane - Anoop
 
Allen Schmitgen pushkar resume'
Allen Schmitgen pushkar resume'Allen Schmitgen pushkar resume'
Allen Schmitgen pushkar resume'
 

Más de GPTraining

Modular Construction and Prefabrication: The Masterclass
Modular Construction and Prefabrication: The MasterclassModular Construction and Prefabrication: The Masterclass
Modular Construction and Prefabrication: The MasterclassGPTraining
 
Employee Benefits
Employee BenefitsEmployee Benefits
Employee BenefitsGPTraining
 
Demand Planing
Demand Planing Demand Planing
Demand Planing GPTraining
 
Accounts Payable asma
Accounts Payable  asmaAccounts Payable  asma
Accounts Payable asmaGPTraining
 
Executive Course for Corporate Secretaries and Personal Assistants
Executive Course for Corporate Secretaries and Personal AssistantsExecutive Course for Corporate Secretaries and Personal Assistants
Executive Course for Corporate Secretaries and Personal AssistantsGPTraining
 
Integrated Open Pit Coal Mine Planning
Integrated Open Pit Coal Mine PlanningIntegrated Open Pit Coal Mine Planning
Integrated Open Pit Coal Mine PlanningGPTraining
 
Transformer Maintenance and Testing
Transformer Maintenance and TestingTransformer Maintenance and Testing
Transformer Maintenance and TestingGPTraining
 
Integrated External and Internal Consultative Management Skills
Integrated External and Internal Consultative Management SkillsIntegrated External and Internal Consultative Management Skills
Integrated External and Internal Consultative Management SkillsGPTraining
 
Procurement Fraud
Procurement FraudProcurement Fraud
Procurement FraudGPTraining
 
Accounts Payable and Credit Management
Accounts Payable and Credit ManagementAccounts Payable and Credit Management
Accounts Payable and Credit ManagementGPTraining
 
Mining sociallabourplan nov67
Mining sociallabourplan nov67Mining sociallabourplan nov67
Mining sociallabourplan nov67GPTraining
 
Mro spares opt-mrktng
Mro spares opt-mrktngMro spares opt-mrktng
Mro spares opt-mrktngGPTraining
 
Mining sociallabourplan marketing
Mining sociallabourplan  marketingMining sociallabourplan  marketing
Mining sociallabourplan marketingGPTraining
 
Nec fidic-jbcc-gcc- ct-marketing (1) (2)
Nec fidic-jbcc-gcc- ct-marketing (1) (2)Nec fidic-jbcc-gcc- ct-marketing (1) (2)
Nec fidic-jbcc-gcc- ct-marketing (1) (2)GPTraining
 
Procurement Fraud Mitigation and Strategic Governance Masterclass
Procurement Fraud Mitigation and Strategic Governance MasterclassProcurement Fraud Mitigation and Strategic Governance Masterclass
Procurement Fraud Mitigation and Strategic Governance MasterclassGPTraining
 

Más de GPTraining (15)

Modular Construction and Prefabrication: The Masterclass
Modular Construction and Prefabrication: The MasterclassModular Construction and Prefabrication: The Masterclass
Modular Construction and Prefabrication: The Masterclass
 
Employee Benefits
Employee BenefitsEmployee Benefits
Employee Benefits
 
Demand Planing
Demand Planing Demand Planing
Demand Planing
 
Accounts Payable asma
Accounts Payable  asmaAccounts Payable  asma
Accounts Payable asma
 
Executive Course for Corporate Secretaries and Personal Assistants
Executive Course for Corporate Secretaries and Personal AssistantsExecutive Course for Corporate Secretaries and Personal Assistants
Executive Course for Corporate Secretaries and Personal Assistants
 
Integrated Open Pit Coal Mine Planning
Integrated Open Pit Coal Mine PlanningIntegrated Open Pit Coal Mine Planning
Integrated Open Pit Coal Mine Planning
 
Transformer Maintenance and Testing
Transformer Maintenance and TestingTransformer Maintenance and Testing
Transformer Maintenance and Testing
 
Integrated External and Internal Consultative Management Skills
Integrated External and Internal Consultative Management SkillsIntegrated External and Internal Consultative Management Skills
Integrated External and Internal Consultative Management Skills
 
Procurement Fraud
Procurement FraudProcurement Fraud
Procurement Fraud
 
Accounts Payable and Credit Management
Accounts Payable and Credit ManagementAccounts Payable and Credit Management
Accounts Payable and Credit Management
 
Mining sociallabourplan nov67
Mining sociallabourplan nov67Mining sociallabourplan nov67
Mining sociallabourplan nov67
 
Mro spares opt-mrktng
Mro spares opt-mrktngMro spares opt-mrktng
Mro spares opt-mrktng
 
Mining sociallabourplan marketing
Mining sociallabourplan  marketingMining sociallabourplan  marketing
Mining sociallabourplan marketing
 
Nec fidic-jbcc-gcc- ct-marketing (1) (2)
Nec fidic-jbcc-gcc- ct-marketing (1) (2)Nec fidic-jbcc-gcc- ct-marketing (1) (2)
Nec fidic-jbcc-gcc- ct-marketing (1) (2)
 
Procurement Fraud Mitigation and Strategic Governance Masterclass
Procurement Fraud Mitigation and Strategic Governance MasterclassProcurement Fraud Mitigation and Strategic Governance Masterclass
Procurement Fraud Mitigation and Strategic Governance Masterclass
 

Último

UKCGE Parental Leave Discussion March 2024
UKCGE Parental Leave Discussion March 2024UKCGE Parental Leave Discussion March 2024
UKCGE Parental Leave Discussion March 2024UKCGE
 
How to Manage Cross-Selling in Odoo 17 Sales
How to Manage Cross-Selling in Odoo 17 SalesHow to Manage Cross-Selling in Odoo 17 Sales
How to Manage Cross-Selling in Odoo 17 SalesCeline George
 
The Stolen Bacillus by Herbert George Wells
The Stolen Bacillus by Herbert George WellsThe Stolen Bacillus by Herbert George Wells
The Stolen Bacillus by Herbert George WellsEugene Lysak
 
Drug Information Services- DIC and Sources.
Drug Information Services- DIC and Sources.Drug Information Services- DIC and Sources.
Drug Information Services- DIC and Sources.raviapr7
 
How to Add a many2many Relational Field in Odoo 17
How to Add a many2many Relational Field in Odoo 17How to Add a many2many Relational Field in Odoo 17
How to Add a many2many Relational Field in Odoo 17Celine George
 
Benefits & Challenges of Inclusive Education
Benefits & Challenges of Inclusive EducationBenefits & Challenges of Inclusive Education
Benefits & Challenges of Inclusive EducationMJDuyan
 
Practical Research 1 Lesson 9 Scope and delimitation.pptx
Practical Research 1 Lesson 9 Scope and delimitation.pptxPractical Research 1 Lesson 9 Scope and delimitation.pptx
Practical Research 1 Lesson 9 Scope and delimitation.pptxKatherine Villaluna
 
Patient Counselling. Definition of patient counseling; steps involved in pati...
Patient Counselling. Definition of patient counseling; steps involved in pati...Patient Counselling. Definition of patient counseling; steps involved in pati...
Patient Counselling. Definition of patient counseling; steps involved in pati...raviapr7
 
Ultra structure and life cycle of Plasmodium.pptx
Ultra structure and life cycle of Plasmodium.pptxUltra structure and life cycle of Plasmodium.pptx
Ultra structure and life cycle of Plasmodium.pptxDr. Asif Anas
 
Easter in the USA presentation by Chloe.
Easter in the USA presentation by Chloe.Easter in the USA presentation by Chloe.
Easter in the USA presentation by Chloe.EnglishCEIPdeSigeiro
 
M-2- General Reactions of amino acids.pptx
M-2- General Reactions of amino acids.pptxM-2- General Reactions of amino acids.pptx
M-2- General Reactions of amino acids.pptxDr. Santhosh Kumar. N
 
Clinical Pharmacy Introduction to Clinical Pharmacy, Concept of clinical pptx
Clinical Pharmacy  Introduction to Clinical Pharmacy, Concept of clinical pptxClinical Pharmacy  Introduction to Clinical Pharmacy, Concept of clinical pptx
Clinical Pharmacy Introduction to Clinical Pharmacy, Concept of clinical pptxraviapr7
 
AUDIENCE THEORY -- FANDOM -- JENKINS.pptx
AUDIENCE THEORY -- FANDOM -- JENKINS.pptxAUDIENCE THEORY -- FANDOM -- JENKINS.pptx
AUDIENCE THEORY -- FANDOM -- JENKINS.pptxiammrhaywood
 
P4C x ELT = P4ELT: Its Theoretical Background (Kanazawa, 2024 March).pdf
P4C x ELT = P4ELT: Its Theoretical Background (Kanazawa, 2024 March).pdfP4C x ELT = P4ELT: Its Theoretical Background (Kanazawa, 2024 March).pdf
P4C x ELT = P4ELT: Its Theoretical Background (Kanazawa, 2024 March).pdfYu Kanazawa / Osaka University
 
General views of Histopathology and step
General views of Histopathology and stepGeneral views of Histopathology and step
General views of Histopathology and stepobaje godwin sunday
 
PISA-VET launch_El Iza Mohamedou_19 March 2024.pptx
PISA-VET launch_El Iza Mohamedou_19 March 2024.pptxPISA-VET launch_El Iza Mohamedou_19 March 2024.pptx
PISA-VET launch_El Iza Mohamedou_19 March 2024.pptxEduSkills OECD
 
What is the Future of QuickBooks DeskTop?
What is the Future of QuickBooks DeskTop?What is the Future of QuickBooks DeskTop?
What is the Future of QuickBooks DeskTop?TechSoup
 
2024.03.23 What do successful readers do - Sandy Millin for PARK.pptx
2024.03.23 What do successful readers do - Sandy Millin for PARK.pptx2024.03.23 What do successful readers do - Sandy Millin for PARK.pptx
2024.03.23 What do successful readers do - Sandy Millin for PARK.pptxSandy Millin
 
How to Add Existing Field in One2Many Tree View in Odoo 17
How to Add Existing Field in One2Many Tree View in Odoo 17How to Add Existing Field in One2Many Tree View in Odoo 17
How to Add Existing Field in One2Many Tree View in Odoo 17Celine George
 

Último (20)

UKCGE Parental Leave Discussion March 2024
UKCGE Parental Leave Discussion March 2024UKCGE Parental Leave Discussion March 2024
UKCGE Parental Leave Discussion March 2024
 
How to Manage Cross-Selling in Odoo 17 Sales
How to Manage Cross-Selling in Odoo 17 SalesHow to Manage Cross-Selling in Odoo 17 Sales
How to Manage Cross-Selling in Odoo 17 Sales
 
The Stolen Bacillus by Herbert George Wells
The Stolen Bacillus by Herbert George WellsThe Stolen Bacillus by Herbert George Wells
The Stolen Bacillus by Herbert George Wells
 
Drug Information Services- DIC and Sources.
Drug Information Services- DIC and Sources.Drug Information Services- DIC and Sources.
Drug Information Services- DIC and Sources.
 
How to Add a many2many Relational Field in Odoo 17
How to Add a many2many Relational Field in Odoo 17How to Add a many2many Relational Field in Odoo 17
How to Add a many2many Relational Field in Odoo 17
 
Benefits & Challenges of Inclusive Education
Benefits & Challenges of Inclusive EducationBenefits & Challenges of Inclusive Education
Benefits & Challenges of Inclusive Education
 
Practical Research 1 Lesson 9 Scope and delimitation.pptx
Practical Research 1 Lesson 9 Scope and delimitation.pptxPractical Research 1 Lesson 9 Scope and delimitation.pptx
Practical Research 1 Lesson 9 Scope and delimitation.pptx
 
Patient Counselling. Definition of patient counseling; steps involved in pati...
Patient Counselling. Definition of patient counseling; steps involved in pati...Patient Counselling. Definition of patient counseling; steps involved in pati...
Patient Counselling. Definition of patient counseling; steps involved in pati...
 
Ultra structure and life cycle of Plasmodium.pptx
Ultra structure and life cycle of Plasmodium.pptxUltra structure and life cycle of Plasmodium.pptx
Ultra structure and life cycle of Plasmodium.pptx
 
Easter in the USA presentation by Chloe.
Easter in the USA presentation by Chloe.Easter in the USA presentation by Chloe.
Easter in the USA presentation by Chloe.
 
M-2- General Reactions of amino acids.pptx
M-2- General Reactions of amino acids.pptxM-2- General Reactions of amino acids.pptx
M-2- General Reactions of amino acids.pptx
 
Clinical Pharmacy Introduction to Clinical Pharmacy, Concept of clinical pptx
Clinical Pharmacy  Introduction to Clinical Pharmacy, Concept of clinical pptxClinical Pharmacy  Introduction to Clinical Pharmacy, Concept of clinical pptx
Clinical Pharmacy Introduction to Clinical Pharmacy, Concept of clinical pptx
 
Prelims of Kant get Marx 2.0: a general politics quiz
Prelims of Kant get Marx 2.0: a general politics quizPrelims of Kant get Marx 2.0: a general politics quiz
Prelims of Kant get Marx 2.0: a general politics quiz
 
AUDIENCE THEORY -- FANDOM -- JENKINS.pptx
AUDIENCE THEORY -- FANDOM -- JENKINS.pptxAUDIENCE THEORY -- FANDOM -- JENKINS.pptx
AUDIENCE THEORY -- FANDOM -- JENKINS.pptx
 
P4C x ELT = P4ELT: Its Theoretical Background (Kanazawa, 2024 March).pdf
P4C x ELT = P4ELT: Its Theoretical Background (Kanazawa, 2024 March).pdfP4C x ELT = P4ELT: Its Theoretical Background (Kanazawa, 2024 March).pdf
P4C x ELT = P4ELT: Its Theoretical Background (Kanazawa, 2024 March).pdf
 
General views of Histopathology and step
General views of Histopathology and stepGeneral views of Histopathology and step
General views of Histopathology and step
 
PISA-VET launch_El Iza Mohamedou_19 March 2024.pptx
PISA-VET launch_El Iza Mohamedou_19 March 2024.pptxPISA-VET launch_El Iza Mohamedou_19 March 2024.pptx
PISA-VET launch_El Iza Mohamedou_19 March 2024.pptx
 
What is the Future of QuickBooks DeskTop?
What is the Future of QuickBooks DeskTop?What is the Future of QuickBooks DeskTop?
What is the Future of QuickBooks DeskTop?
 
2024.03.23 What do successful readers do - Sandy Millin for PARK.pptx
2024.03.23 What do successful readers do - Sandy Millin for PARK.pptx2024.03.23 What do successful readers do - Sandy Millin for PARK.pptx
2024.03.23 What do successful readers do - Sandy Millin for PARK.pptx
 
How to Add Existing Field in One2Many Tree View in Odoo 17
How to Add Existing Field in One2Many Tree View in Odoo 17How to Add Existing Field in One2Many Tree View in Odoo 17
How to Add Existing Field in One2Many Tree View in Odoo 17
 

Pressure vessels

  • 1. THINKING BEYOND THE OBVIOUS Deleg can cl ates aim 2 CPD point s Pressure Vessel Applications, Operations and Maintenance WORKSHOP 30 - 31 October 2012 Global Prospectus Training Centre, 366 Pretoria Avenue, Randburg Endorsed and accredited by Southern African Asset Management Association (SAAMA) Ref no: SAAMA00469 SETA Accreditation No. 2502
  • 2. OVERVIEW The design of pressure vessels is a specialist task that requires a thorough understanding of topics such as: strength of materials, stress analysis and relevant design codes. Pressure vessel design also necessitates a logical, planned approach to the documentation of all relevant calculations as in many cases; these design calculations can be quite extensive. Given that pressure differential is dangerous and that fatal accidents have occurred in the development and operation of pressure vessels, standards have been established and applied to ensure safety governing the design, fabrication, and inspection of boilers and pressure vessels such as the ASME BPVC Section VIII Div. 1 (Code). It is therefore appropriate that South African engineers should be provided with an opportunity to formally receive instruction in the area of pressure vessel design in the context of the relevant South African standard. This 2-day intensive practical training course will offer insight into the requirements outlined in designing, operating and maintaining pressure vessels. Delegates will be awarded with an opportunity to understand how to apply the standard to common scenarios they face in the design and fabrication of the equipment they work with. WORKSHOP OBJECTIVES At the completion of this workshop, each delegate should be able to: • Thoroughly understand how strength of materials theory forms the basis of all international pressure vessel codes and standards • Understand the most commonly used terms and jargon within the area of pressure vessel design • Recognize and compare the different methods of stress analysis available for pressure vessel design purpose • Appreciate the intent and instruction contained within the most commonly employed clauses of the Code and the South Africa standard • Have a basic understanding of topics relating to: Vessel Manufacturing Methods, Vessel Testing, Marking and Qualification, and Relief Devices. WHO SHOULD ATTEND • Process Design Engineers • Mechanical Engineers • Process Engineers • Technical Engineers • Head of Maintenance or Operations • Operations Engineers • Project Engineers • Production Engineers • Line Managers and Supervisors • Plant Engineers • Maintenance Technicians • Consulting Engineers • Maintenance Engineers • Pump Sales Representatives • Inspections Engineers • Anyone who needs to select, specify, commission, install • Reliability Engineers and/or maintain pumping equipment EXPERT FACILITATOR Ntozelizwe Benjamin Mqenebe Ntozelizwe Benjamin Mqenebe, is a seasoned reliability and maintenance consultant and advisor with 8 years of solid experience in the field. He had been invited in different maintenance and reliability trainings in South Africa, Nepal, India and USA. His portfolio of maintenance trainings include Maintenance Management courses on TPM, Lubrication, Tribology, Condition-Based Maintenance, RCM, RCFA, Planned Maintenance, World Class Maintenance Management, The 12 Disciplines, Oil Contamination Control, Life Cycle Management, Maintenance Indices and KPI’s, Maintenance Strategies and much more. Ntozelizwe previously worked with Umgeni Water, as Engineer-In Training, System Administrator and later Reliability Engineer. He worked for Engineering & Projects Company as their Mechanical Engineer on the Ghana Tarkwa CIL Project, and later on the Namibian Langer Heinrich Uranium Project. He joined VWS Envig on the RBMR project and Madagascar project in Ambatovy. Worked as a Systems Engineer for Port Elizabeth Metropolitan Municipality on their Operations & Maintenance module for EDAMS. He joined Arcelormittal Newcastle (Sinter Plant) as a Senior Engineer responsible for Reliability and Maintenance services. Ntozelizwe is currently working for Lizwe Engineers as the CEO since 2009. GLOBAL PROSPECTUS TRAINING (PTY) LTD. Chief Executive O er - Dhevaraj Pillay Johannesburg - Tel: +27 11 781 6222 Fax: +27 11 781 6044 Marketing - m2@globalprospectus.co.za Auditors - Russell Bedford SA (Jhb) Inc. Pietermaritzburg - Tel: +27 33 391 4229 Fax: +27 33 391 5722 Design - www.designmaster.co.za (071 018 8355) Legal - DA Morris & Associates
  • 3. DAY 1 DAY 2 08:00 – 08:20 Early morning refreshments 08:00 – 08:20 Early morning refreshments and registration 08:20 – 08:30 Opening address 08:20 – 08:30 Opening address 08:30 – 10:30 Loads, Shells & Joints Continued ... 08:30 – 10:30 Background information • Advanced shell design – pressure and • Industry terms and jargon defined combined loadings • Examples of pressure vessel failures • Advanced shell design – stiffening rings • Tensile tests and stress-stain diagrams • End design – thickness, shape, attachment • Stresses: Primary, secondary, peak and allowable • Design of doors, stays and manholes, etc. • Failure theories • Worked example problems • Thin walled versus thick-walled pressure vessels • Roark’s, Shigley’s and Timoshenko’s formulas 10:30 – 10:45 Mid-morning Break versus Finite Element (FEA) methods • Background information to ASME Code and its rules 10:45 – 11:30 Openings, Connections, • Vessel classes Branches & Supports • Worked example problems • Design of openings – un-reinforced and reinforced • Design of connections and branches 10:30 – 10:45 Mid-morning Break • Design of vessels supports • Worked example problems 10:45 – 12:45 Layout • Pressure vessel parts and components: Shell, head, 11:30 – 12:45 Ancillaries legs, skirt, internals, etc. • Level gauges • Pressure Vessel Orientation • Arrestors • Examples of industry standard pressure vessels for • Relief valves various selected applications • Worked example problems 12:45 – 13:45 Lunch Break 12:45 – 13:45 Lunch Break 13:45 – 15:00 Manufacturing • Pressure vessel fabrication 13:45 – 15:00 Materials • Pressure vessel inspection • Materials selection and specification • Testing and documentation • Commonly used materials and their applications • Material identification 15:00 – 15:15 Afternoon Break • Materials testing • Corrosion allowances 15:15 – 16:45 ASME BPVC Section VIII Div. 1 15:00 – 15:15 Afternoon Break Comparison with AS 1210 • ASME pressure vessel code history and structure • A brief summary of design rules and equations 15: 15 – 16:45 Loads, Shells & Joints • A brief comparison between ASME BPVC • Design pressure, temperature, load factors and Section VIII Div. 1 and AS1210 combined loadings • A basic worked example problem to ASME BPV • Joint Design – Welded, Brazed, Soldered, etc. Section VIII Div. 1 • Basic shell design – internal pressure only • Advanced shell design – pressure and 16:45 End of Day Two combined loadings • Worked example problems 16:45 End of Day One GLOBAL PROSPECTUS TRAINING (PTY) LTD. Chief Executive O er - Dhevaraj Pillay Johannesburg - Tel: +27 11 781 6222 Fax: +27 11 781 6044 Marketing - m2@globalprospectus.co.za Auditors - Russell Bedford SA (Jhb) Inc. Pietermaritzburg - Tel: +27 33 391 4229 Fax: +27 33 391 5722 Design - www.designmaster.co.za (071 018 8355) Legal - DA Morris & Associates
  • 4. Pressure Vessel Applications, Operations ONLY and Maintenance R749 30 - 31 October 2012 Per D eleg 0 Registration Form Global Prospectus Training Centre, ex. VA ate, T. 366 Pretoria Avenue, Randburg GPW Marketing Fax Completed Registration Form To: +27 11 781 6044 Company Name: Type of Business: Address: Tel: Fax: VAT Number: Delegate 1: Position: E-Mail: Delegate 2: Position: E-Mail: Delegate 3: Position: E-Mail: Delegate 4: Position: E-Mail: Delegate 5: Position: E-Mail: AUTHORISATION: Signatory must be authorised to sign on behalf of Company CREDIT CARD Name: Cardholder’s Name: DETAILS Position: Credit Card Number: Signature: Date: CVC No: Expiry Date: PAYMENT METHODS 1. Bank Transfer - Global Prospectus Training (PTY) Ltd. 2. Credit card - Please fill in your credit card details above First National Bank: Randburg 3. Cheques - Made Payable to: Global Prospectus Training (PTY) Ltd. Account Number: 62109 270372 Branch Code: 254005 TERMS & CONDITIONS The following terms and conditions will apply: Substitutions Payment is required in full 5 days from date of invoice Delegates must inform Global Prospectus Training (PTY) Ltd in writing All payments to be made directly to Global Prospectus Training (PTY) Ltd. of any substitutions. No seats will be reserved, unless Global Prospectus Training (PTY) Ltd. receives a signed registration form. There is no charge for substitutions. Global Prospectus Training (PTY) Ltd. reserves the right, due to circumstances beyond our control, to change Global Prospectus Training (PTY) Ltd will not be held liable for incorrect speakers, program content, date & venue. Delegate details on Certi s, etc. in the event of substitutions being The signed registration form is a legally binding contract. made on the day of the conference. In the event of Global Prospectus Training (PTY) Ltd having to cancel or postpone an event due to circum- Cancellations stances beyond our control, delegates will be issued with a credit voucher, All cancellations will be subject to approval by the management of Global Prospectus Training (PTY) Ltd. - which may be used at another of our events. All cancellations made 7 days prior to date of the above mentioned event will be subject to a 50% cancellation fee. Cancellations made within 7 days of date of the above mentioned event, will be subject to a 100% cancellation fee. - Global Prospectus Training (PTY) Ltd will not be held liable for travel and accommoda - The will be no refunds or credit vouchers. tion costs. The conference fee includes: conference material, lunches and refreshments, but excludes travel & accommodation. GLOBAL PROSPECTUS TRAINING (PTY) LTD. Chief Executive O er - Dhevaraj Pillay Johannesburg - Tel: +27 11 781 6222 Fax: +27 11 781 6044 Marketing - m2@globalprospectus.co.za Auditors - Russell Bedford SA (Jhb) Inc. Pietermaritzburg - Tel: +27 33 391 4229 Fax: +27 33 391 5722 Design - www.designmaster.co.za (071 018 8355) Legal - DA Morris & Associates