GOODSHEPHERD TRB.docx
•0 recomendaciones•1 vista
Denunciar
Compartir
Descargar para leer sin conexión
Trainees Record Book in Shielded Metal Arc Welding NC II with 21st Century Basic Skills
Más contenido relacionado
Similar a GOODSHEPHERD TRB.docx
Similar a GOODSHEPHERD TRB.docx(20)
Último
Último(20)
GOODSHEPHERD TRB.docx
- 1. GOOD SHEPHERD TRAINING AND ASSESSMENT CENTER, INC. TRAINEE’S RECORD BOOK Trainee’s No.______________ NAME: ______________________________________ QUALIFICATION: SMAW NC II TRAINING DURATION: 268 hours TRAINER: _____________________________
- 2. Instructions: This Trainees’ Record Book (TRB) is intended to serve as record of all accomplishment/task/activities while undergoing training in the industry.It will eventually become evidence that can be submitted for portfolio assessment and for whatever purpose it will serve you. It is therefore important that all its contents are viably entered by both the trainees and instructor. The Trainees’ Record Book contains all the required competencies in your chosen qualification. All you have to do is to fill in the column “Task required” and “Date Accomplished” with all the activities in accordance with the training program and to be taken up in the school and with the guidance of the instructor. The instructor will likewise indicate his/her remarks on the “Instructors Remarks” column regarding the outcome of the task accomplished by the trainees. Be sure that the trainee will personally accomplish the task and confirmed by the instructor. It is of great importance that the content should be written legibly on ink. Avoid any corrections or erasures and maintain the cleanliness of this record. This will be collected by your trainer and submit the same to the Vocational Instruction Supervisor (VIS) and shall form part of the permanent trainee’s document on file. THANK YOU. BASIC COMPETENCIES Unit of Competency: Participate in Workplace Communication Learning Outcome Task/ Activity Required Date Accomplished Instructor’s Remarks 1. Obtain and Convey workplace communication 2. Participate in work place meetings and discussions 3. Compete relevant work related documents GRADE ___________________ ____________________ Trainee’s Signature Trainer’s Signature Over printed name Overprinted nam
- 3. Unit of Competency: Work in Team Environment Learning Outcome Task Activity Required Date accomplished Trainer’s Remark 1. Describe team role and scope 2. Identify own role and responsibility within team 3. Work as a team member GRADES _________________ ____________________ Trainee’s Signature Trainer’s Signature Unit of Competency: Practice Career Professionalism _________________ ____________________ Trainee’s Signature Trainer’s Signature Learning Outcome Task/Activit y Required Date Accomplishe d Trainer’ s Remark s 1. Integrate objectives with organizationa l goals 2. Set and meet work priorities 3. Maintain professional growth and development GRADES
- 4. Unit of Competency: Practice Occupational Health and Safety _________________ ____________________ Trainee’s Signature Trainer’s Signature Learning Outcome Task Activity Required Date accomplished Trainer’s Remark 1. Identify hazards and risks 2. Evaluate hazards and risks GRADES
- 5. COMMON COMPETENCIES Unit of Competency: Apply Safety Practices _________________ ____________________ Trainee’s Signature Trainer’s Signature Unit of Competency: Interpret Drawings and Sketches _________________ ____________________ Trainee’s Signature Trainer’s Signature Learning Outcome Task Activity Required Date accomplished Trainer’s Remark 1. Perform four fundamental operations 2. Perform conversions of units 3. Perform calculations on algebraic expressions 1. Compute percentage ratio GRADES Learning Outcome Task Activity Required Date accomplished Trainer’s Remark 1. Identify hazardous area 2. Use protective clothing and devices 3. Perform safe handling of tools, equipment and materials 4. Perform first aid 5. Use fire extinguisher GRADES
- 6. Unit of Competency: Perform Industry Calculations _________________ ____________________ Trainee’s Signature Trainer’s Signature Unit of Competency: Contribute to Quality System _________________ ____________________ Trainee’s Signature Trainer’s Signature Learning Outcome Task Activity Required Date accomplished Trainer’s Remark 1. Perform four fundamental operations 2. Perform conversions of units 3. Perform calculations on algebraic expressions Compute percentage ratio GRADES Learning Outcome Task Activity Required Date accomplished Trainer’s Remark 1. Inspect work done 2. Apply quality standards to work 3. Protect company property and customer interests GRADES
- 7. Unit of Competency: Use Hand Tools _________________ ____________________ Trainee’s Signature Trainer’s Signature Unit of Competency: Prepare Weld Materials _________________ ____________________ Trainee’s Signature Trainer’s Signature Learning Outcome Task Activity Required Date accomplished Trainer’s Remark 1. Select hand tools 2. Use hand tools 3. Maintain hand tools GRADES Learning Outcome Task Activity Required Date accomplished Trainer’s Remark 1. Set up cutting equipment 2. Cut and prepare edges of materials 3. Clean surfaces and edges 4. Prepare welding consumables 5. Prepare welding safety and protective equipment GRADES
- 8. Unit of Competency: Set-up welding equipment _________________ ____________________ Trainee’s Signature Trainer’s Signature Unit of Competency: Fit up Weld Materials _________________ ____________________ Trainee’s Signature Trainer’s Signature Learning Outcome Task Activity Required Date accomplished Trainer’s Remark 1. Set up cutting equipment 2. Cut and prepare edges of materials 3. Clean surfaces and edges 4. Prepare welding consumables 5. Prepare welding safety and protective equipment GRADES Learning Outcome Task Activity Required Date accomplished Trainer’s Remark 1. Perform tack welding 2. Check gap and alignment 3. Set up welding positioner GRADES
- 9. Unit of Competency: Repair Welds _________________ ____________________ Trainee’s Signature Trainer’s Signature CORE COMPETENCIES Unit of Competency: Welding Carbon Steel Plates and Pipe Using SMAW _________________ ____________________ Trainee’s Signature Trainer’s Signature Learning Outcome Task Activity Required Date accomplished Trainer’s Remark 1. Mark/ locate weld defects 2. Prepare tools and equipment 3. Remove defects 4.Perform re-welding GRADES Learning Outcome Task Activity Required Date accomplished Trainer’s Remark 1. Perform Root Pass 2. Clean root pass 3. Weld subsequent/ filling passes 4. Perform capping GRADES