1. Electrical Engineer
Iram Shahzad Khan
M-Tech ( Electrical ) prestion Universty
Personal Information
Objective
Seeking a responsible and challenging career with a growth oriented organization in
the field of engineering where my talent, knowledge and experience in the relevant
field may significantly contribute to the organization's growth and profitability
Work Experience Summery
Sr
No.
Position Company From To
1 Electrical Engineer
Ibn Omiarah Company,
Saudi Arabia
May-2012 Present
2 Asst Electrical Engineer
Pak Serve (Private)
Limited, Pakistan
June -2011 Feb-2012
Total Experience 5+ Years
Details of Work Experience
1. IBN Omairah Contracting Company
May-2012 present
Position ( Electrical Engineer )
Key Roles
Working as Electrical Engineer in HV, EHV in U/G, OHTL & Substation.
Study the complete Tender Files before Biding & analysis the biding.
Detailed design drawings and construction drawings of the Cable Routes and the joints
locations.
Supervise and assign duties to SITE ENGINEER ( Under Ground & Substation )
engaged in technical installation and commissioning of the project
Evaluate all incoming tenders/contracts/requirements from contractors/clients.
General & Particular technical specifications, technical data sheets and drawings
Clarify the doubts with the clients/contractors by sending an RFI (Request for
Information).
Name Iram Shahzad Khan
Birth Date 21-08-1988
Nationality Pakistani
Passport No. VW4101602
Permeant Address Pakistan- Mianwali (Punjab)
Current Address Saudi Arabia – Riyadh City
Email Isk.habib@gmail.com
Cell Number +966-594874999 / +92-3327642168
2. Review/Study of Design Drawings and Shop Drawings
Review/Study the Electrical standards of the project from the client i.e. NEC, IEC etc
Study the quality and safety standards of work
Study the catalogs of the materials
Calculate BOM/BOQ and take off of material
Provide the detailed list of specifications to the suppliers/vendors for procuring the cost
of the supplies.
Prepare specifications for purchase of materials and equipment's according to the SEC,
IEC and ANSI/IEEE standards.
Starting with Selection and Visit the Site to investigate the Nature of the Works, then the
Estimation for the materials & works.
Technical Submittal for the Materials with Manufactures and suppliers to approve the
materials with the Clint.
1.1Other Responsibility
Site Work in Saudi Aramco Area (Oil & Gas Area)
Prepare the prequalification of the company for approved from Saudi Electricity
Company
Project List
No. Client Name Substation Project
1
Saudi Electricity
Company NG
Construction of SALAH ALDEEN 132/13.8 KV Substation # 8219
In RIYADH
2
Saudi Electricity
Company NG
Construction of AL-NADA 132/13.8 KV Substation # 8220 In
RIYADH
3
Saudi Electricity
Company NG
Construction of NORTH ALMORABA 132/13.8 KV Substation #
8187 In RIYADH
4
Saudi Electricity
Company NG
Reinforcement of HOTAT SUDAIR 132/33 KV Substation # 8502 In
HOTAT SUDAIR
No. Client Name 380 KV U/G
1
Saudi Electricity
Company NG
Installation of 380 kv Underground Cables between S/S JAH & (
HHR2 , JNE ) In Jeddah
No. Client Name 132/110 KV U/G
1
Saudi Electricity
Company NG
CONNECTION OF Industrial area 1& 4 S/S 8162WITH 132 KV
NETWORK
2
Saudi Electricity
Company NG
INSTALLATION OF 132 KV U/G CABLE CIRCUITS FOR
NEW S/S #8181, IN Sultana Area, Riyadh
3
Saudi Electricity
Company NG
132KV Power & Fiber Optic Cables Installation Between Abha
East 380/132kv BSP and Khamis West 132/33/13.8
4
Saudi Electricity
Company NG
132KV Power & Fiber Optic Cables Installation For the Power
supply to Khalidiyah #2 132/33/13.8 S/S.
5
Saudi Electricity
Company NG
Power Supply to Housing Project in Dammam of 115 KV
(Underground Cable Portion)
3. 2. Pak Serve (Private) Limited
June-2011- Feb-2012
Position (Assistent Electrical Engineer )
Key Roles
Working as Assistant Electrical Engineer in 6 MW Generator Company of
Jenbacher & Caterpillar Company Generator.
Installation of LV Cable in housing wiring
Installation the LV panel
Installation and terminations of 13.8 kV oil type and dry type transformer PEL make
Installation and pulling of MV cables and LV cables
Installation and termination of MDBs, SMDBs, DBs
Installation of battery system and battery racks
Installation , termination and wiring of power sockets, lighting switches, wall and
hanging lights, low current system
Installation of cable ladders, cable trays & cable trunk raceways for MV and LV
cables
Installation of PVC, EMT and RGS conduit for wiring raceways of small power
sockets, lighting switches, lighting points, grounding and lightning protection
Installation of grounding system for MV/LV system and equipment Earthing
Installation of lightning protection system for equipment and building structure
protection
Installation of PVC & GI boxes for power sockets, lighting switches, wall and
ceiling lights, grounding
Academic
Degree Year Davion Institute
M-Tech (Electrical) 2014-2016 1st
Preston University, Islamabad
B-Tech (Hons)
Electrical
2007-2011 1st Newports Institute of Communications
and Economics
Training
Training Institute
Saudi Aramco Certified Work
Permit Receiver
SAUDI ARAMCO, Saudi Arabia
PMP Ibn Omairah Co
Autocad AL-Khaleej Training, KSA
PLC (S7-300 Siemens), SCADA &
HMI
Electrical Engineering Solutions International
(PVT) Ltd. Pakistan
Professional Membership
Member of Saudi Council of Engineer
Skills
Proficient in MS Office Applications
Extensive experience of working in performance and target oriented teams, while also
leading some, in different scenarios
Excellent Communication, Presentation and Public Speaking Skills