Se ha denunciado esta presentación.
Utilizamos tu perfil de LinkedIn y tus datos de actividad para personalizar los anuncios y mostrarte publicidad más relevante. Puedes cambiar tus preferencias de publicidad en cualquier momento.


6.673 visualizaciones

Publicado el

Arduino project that streams internet radio using an Ethernet connection.
The user selects the station by swiping an NFC tag formatted with the URL of the station.

Source code avaialable at github:

  • Sé el primero en comentar


  1. 1. ArduRadio:Playing Internet Radio with Arduino Javier Montaner @tumaku_
  2. 2. Agenda Introduction Bill of Materials Key Learnings Project Status & Next Steps2 © Javier Montaner 2012
  3. 3. Introduction3 © Javier Montaner 2012
  4. 4. Internet Radio on Arduino Exploratory work to understand what can(not) be done with Arduino and similar HW platforms Based on commercial Arduino boards and shields: 7 Arduino Mega Ethernet MP3 NFC Final source code will be opened through github4 © Javier Montaner 2012
  5. 5. Project Scope Build an Arduino-based device that plays internet streaming radio Use simple touch user interface (NFC/RFID) to select radio stations Learn about open HW Share results with the community A similar concept has been explored by Jordi Parra (@zenona) in its SpotifyBox project: © Javier Montaner 2012
  6. 6. Bill of Materials (BOM)6 © Javier Montaner 2012
  7. 7. Arduino Mega 2560 256 KB 54 Digital I/O Pins Can be implemented on Arduino UNO but memory and available PINs start being a problem © Javier Montaner 2012
  8. 8. Arduino Ethernet Shield Based on WiznetW5100 10/100 Mb TCP/IP library Includes micro-SD card slot Controlled through SPI © Javier Montaner 2012
  9. 9. Sparkfun MP3 Player Shield Based onVS1053B Plays Ogg Vorbis/MP3/ AAC/WMA/MIDI 3.5mm stereo output jack Includes micro SD card slot Controlled through SPI © Javier Montaner 2012
  10. 10. SeeedStudio NFC Shield Based on NXP PN532 Suppport Reader, Card emulation and Peer to Peer PCB printed antenna Controlled through software SPI © Javier Montaner 2012
  11. 11. Unyka UK-1 Portable Speaker USB Powered with Lithium Ion built-in battery (500mAh) Includes micro SD card slot USB and 3,5mm audio jack Volume control Frequency range: 90Hz -20kHz Power: 2 watts11 © Javier Montaner 2012
  12. 12. Total Cost of Prototype in € Component Price Arduino Mega €41 Ethernet Shield €29 MP3 Shield €32 NFC Shield €24 Speaker €15 Total €141 This cost is not suitable for a commercial product but it is extremely cheap to build a working prototype12 © Javier Montaner 2012
  13. 13. Where to buy? I have bought hardware in all these web stores, but there are many more out there in internet Adafruit Arduino store Cooking-Hacks SeeedStudio Sparkfun Electronics © Javier Montaner 2012
  14. 14. Key Learnings14 © Javier Montaner 2012
  15. 15. General Open HW community is very active Quality of documentation varies greatly but people are usually helpful and reactive Google is a great source of (hidden) information Arduino is a learning and prototyping tool. There are definitely more powerful and cheaper platforms but almost any technology that you can think of has already been integrated in/through an Arduino shield There are other HW solutions from alternative vendors for all the elements in the BOM15 © Javier Montaner 2012
  16. 16. Arduino I started with Arduino Uno, but soon ran out of PINs and memory so I easily moved to Arduino Mega Interoperability between shields usually requires some rewiring (physical or in libraries) but no soldering There is always somebody that has experienced and solved your problem. Check arduino forums and google16 © Javier Montaner 2012
  17. 17. Arduino Dig into Arduino open libraries to learn (I did learn a lot about SPI, registers, interruptions, etc.) Update the official libraries to add new functionality. If you mess it up, you can easily restore them Arduino IDE is very simple to start but it becomes too simple when you want to work on more complex projects17 © Javier Montaner 2012
  18. 18. Arduino Ethernet Shield There is an Arduino Ethernet board that could make the BOM cheaper client.print("GET "); The Ethernet library implements client.print(ndefPath); TCP/IP stack but not http -> you client.println(" HTTP/1.1"); need to hardcode http protocol client.println("Connection: Keep-Alive"); yourself client.print("HOST: "); client.println(ndefServer); The good point is that the library client.println(); design makes your code “interoperable” (easily portable) when you replace Ethernet by WiFi or GPRS ☺18 © Javier Montaner 2012
  19. 19. MP3 Player Shield The original library is not fully working and showed (at least for me) some interoperability issues. However Bill Porter (@Bill_Porter) has shared an excellent library (great to learn about Arduino interruptions) that works asynchronously Another helpful example is available at Rui’s The Techman blog The shield itself supports any bitrate but Arduino speed limits it only to 32kbps streams. If you try to play higher bitrates the sound becomes bumpy © Javier Montaner 2012
  20. 20. NFC Shield The original library uses its own software implementation of the SPI protocol. Unfortunately, it is not compatible with the Arduino HW library used by Ethernet/MP3 shields. Solution → Use different PINs for NFC SPI implementation Alternatively I have created a HW version of Seeedstudio’s library available at github The library supports basic RFID functionality (e.g. it can read MIFARE Ultralight and Classic tags). However it has no notion of NFC protocols. If you want to use NFC formats (i.e. NDEF) you need to update the library yourself Although PN532 supports communication through SPI or I2C, the shield hardwires the SPI option © Javier Montaner 2012
  21. 21. NFC Technology You can use the NFC shield just as a reader of RFID tags. However if you want to interact with NFC formatted tags, you need to check the NFC specifications General information and NFC specifications (formats and protocols) can be downloaded from NFC Forum after agreeing to their terms and conditions. You ca skip the radio layers (the shield/PN532 chip does the job) but you need the NDEF (NFC Data Exchange Format) specifications for messages and records You also need to understand how NDEF messages are coded in different tags (e.g. I have used Mifare Ultralight tags and had to follow “NFC Forum Type 2 Tag Operation Specification”) I found very useful NFC examples and documentation for Android phones. In particular I suggest reading: Getting started with NFC on Android by Richard Legget (.net magazine) Android API Guide for developers There are two useful and free applications from NXP in the Android Play Store to read and write the content of different types of NFC tags: NFC Tag Info: NFC Tag Writer: © Javier Montaner 2012
  22. 22. NDEF Formatted Mifare Ultralight Tag Block Binary content [00] * XX:XX:XX:XX (UID0-2, BCC0) [01] * XX:XX:XX:XX (UID3-6) [02] . XX 48 00:00 (BCC1, INT, LOCK0-1) [03] . E1:10:06:00 (OTP0-3) [04] . 03 28 D1 01 |.(..| [05] . 24 55 03 73 |$U.s| [06] . 74 72 65 61 |trea| [07] . 6D 31 2E 72 |m1.r| [08] . 61 64 69 6F |adio| [09] . 6D 6F 6E 69 |moni| [0A] . 74 6F 72 2E |tor.| [0B] . 63 6F 6D 2F |com/| [0C] . 4D 6F 75 6E |Moun| [0D] . 74 61 69 6E |tain| [0E] . 46 4D FE 00 |FM..| [0F] . 00 00 00 00 |....| Read with NFC Tag Info Android application from NXP22 © Javier Montaner 2012
  23. 23. Project Status & Next Steps23 © Javier Montaner 2012
  24. 24. Current Status of the Project I have built a working and stable prototype It plays32kbps streams from internet It works with NDEF formatted Mifare Ultralight tags (type 2) I use Android application to write the content of the tags For other tag types or unformatted type 2 tags, the device plays hardcoded internet radio stations defined in the code Arduino script size is around 34kB (including all the libraries)24 © Javier Montaner 2012
  25. 25. Next Steps? Clean up all the code and publish it in github Replace the Ethernet shield by the new ArduinoWiFi shield and try to play streams with higher bitrates Integrate AM/FM Radio shield Improve the NFC library to support other types of NFC Tags Implement Card Emulation and/or Peer-to-Peer mode in NFC library to interact directly with an Android application over NFC Port the solution to an Android USB dongle (can be bought now for less than €50)25 © Javier Montaner 2012
  26. 26. More Info Javier Montaner (Madrid, Spain) @tumaku_ (twitter)26 © Javier Montaner 2012