1. Page 1 of CV for Wong Koon Meng
Wong Koon Meng
Blk 691A, Choa Chu Kang Crescent, #22-40, S’pore 681691
Date of Birth & Age: 19/06/1962, 54 yrs old Nationality: Singaporean
Mobile Number: +65 92237279 Email Address: kenko036@hotmail.com
Profile
Quality Assurance and Quality Control Manager (QAQC) Cooperative Muratori &
Cementisti CMC di Ravenna. CMC di Ravenna is in construction and completion of
an underground civil defence station known as Tampines West Station together
with two circular shafts and a series of twin bored tunnels of approximately 2.88
km linking up the two shafts and Tampines West Station under Contract C926
Downtown Line Stage 3 (DTL3) which is part of the Downtown Line MRT system.
My duties and responsibilities are:
 Responsible that the Quality System is implemented in the project site
 Responsible that quality requirements are met at the site, the Quality
System is working correctly and any needed corrective actions are applied
 Verifying quality related site activities are in compliance to the regulations
and standards
 Responsible for the acquisition of the ISO 9001, ISO 14001 and OSHAS
18001 Certificates
 Responsible for Non-Compliance Notice (NCN) and Non Conformance
Report (NCR), remedial actions undertaken and satisfactorily closure of
NCNs and NCRs by the responsible managers
Previously was working as Quality Assurance and Safety Management Manager
for Fokker Services Asia Pte Ltd. Fokker Services Asia Pte Ltd is an aircraft
(Fokker series and ATR series) heavy maintenance MRO and Component MRO. As
a Quality Assurance and Safety Management Manager, I manage the Quality
System and Safety Management System, ensuring the organization is in
compliance to Civil Aviation Regulatory requirements and government regulatory
requirements and standards. Responsible for quality and safety assurance
programs, policies, processes, continuous review and updating of Company
Exposition Manuals, managing the training requirements of aircraft and
component Certifying staff, B1.1 & B2 Support Staff and issuance of company
authorisation.
My responsibility in Fokker Services Asia Pte Ltd also include the acquisition of
different States Approved Maintenance Organization Certificates and maintaining
nine Approval Certificates in the company namely EASA, FAA, CASA Australia,
CASA PNG, GACA, Indonesia DGCA, Vietnam, Myanmar and AS91000C.
My achievements in Fokker Services Asia Pte Ltd were transitioned from CASA
Australia CAR 30 Approval to CASR Part 145 Approval; relocation of Fokker
Services Asia Pte Ltd to a new MRO facility in Seletar Aerospace Park, making it
to operational status and inviting all the respective Civil Aviation Authorities for
inspection and approval of the new MRO facility in order to continue our aircraft
and component MRO business. In addition, grew the company from 40 staff to
above 120 staff, increased the pool of licensed engineers from 4 to 10, implement
continuous improvement, LEAN, Voluntary Reporting System throughout the
organization.

2. Page 2 of CV for Wong Koon Meng
Work Experience
Oct 2015 – Current: Quality Assurance & Quality Control Manager,
Cooperative Muratori & Cementisti CMC di Ravenna
 QA/QC Management system of Tampines West Station
and Tunnels for Downtown Line stage 3 project and
site
 Management Representative for internal and external
audits for ISO 9001, ISO 14001 and OSHAS 18001
certifications
 Prepare and review the Project Quality Plan complying
with the requirements specification in the Contract
 Assure all personnel are aware of and implements the
Quality System by using the approved procedures,
drawings, materials through internal Quality Control
 Management of Non-Compliance Notices and Non
Conformance Reports and undertake corrective and
preventive actions with the responsible managers
 Submission of Design Approval Request on project
quality and material for approval
 Submission of Method of Statement for repair approval
 Coordinate quality inspections with all site
subcontractors and vendors, including non-destructive
testing
May 2011 – 3 June 2015: Quality Assurance Manager, Fokker Services
Asia Pte Ltd
 Management Personnel in Organization
 Maintain the Company Maintenance Organization
Exposition Manuals
 Manage the acquisition of different States Approved
Maintenance Organization Certificates
 Maintaining and assist in renewal of the Aircraft
Maintenance Engineers Licence
 Plan and perform internal audits and external audits on
vendors, contractors and sub contractors
 Monitor, implement Corrective and Preventive actions
to be taken by organization
 Investigation on Maintenance Events, Customer
Complaints
 Manage the training processes and training
requirements of certifying staff and support staff and
issued of company authorisation to certifying staff and
support staff
 Vendor, contractor and sub contractor assessment and
approval process
 Knowledge of all Civil Aviation Authorities Regulations
as required, in particular CASR Part 145, EASA Part-
145, Part M and Part-66, FAA Part 145, CCAR Part 145.
 Knowledge of Quality Management System and Safety
Management System and experienced in its
implementation in an MRO environment
August 2008- May 2011: Assistant Manager, Quality
Eurocopter South East Asia Pte Ltd
 Deputizes the Quality Manager.
 Maintain the Company Maintenance Organization
Exposition Manual, Safety Management System

3. Page 3 of CV for Wong Koon Meng
Manual, Pilot Training and Maintenance Training
Organization Manuals
 Manage Quality Management System and the Safety
Management System
 Manage the acquisition of different States Approved
Maintenance Organization Certificates, Singapore SAR-
21 Design Organization Certificate and SAR-147
Maintenance Training Organization Certificate
 Liaise with different States Civil Aviation on new issue
and renewal of Certificate of Registration and
Certificate of Airworthiness
 Maintaining and assist in renewal of the Aircraft
Maintenance Engineers License
 Plan and perform audits on Part-145, Part-147, Part-
21, ISO 9001:2008 Quality Management System and
Safety Management System
 Monitor, implement Corrective and Preventive actions
to be taken by organization
 Maintaining the monitoring calibration status of test
and measuring equipments
 Manage the training processes and training
requirements of Operations staff
 Perform receiving inspection and pre-delivery
inspection of helicopter
 Qualifying vendors’ approval
 Knowledge of Aviation Regulations, in particular EASA
Part-145, Part M and Part-66.
Nov 1982-Aug 2008:Republic Of Singapore Airforce (RSAF)
Section Warrant Officer In-Charge, Changi AirBase,
(Feb 2008 – Aug 2008)
 Licensed Aircraft Engineer F-16
 Manage, supervise and provide training to aircraft
specialists in the Avionics and Electrical flight.
 Provide subject matter expert knowledge and advice
on F16 aircraft defects, maintenance and servicing.
 Perform aircraft defects trending and analysis.
 Formalized work procedures, modification procedures,
Special Technical Instructions and Servicing
Instructions.
 Performed audits on Quality Management System on
processes in accordance with ISO 9001:2000.
Production Superintendent, Changi AirBase (Feb
2007 – Feb 2008)
 Licensed Aircraft Engineer F-16
 Lead, manage and supervise the composite workforce
of 50 specialists in F16 aircraft rectifications, servicing
and maintenance activities in order to achieve the
optimum amount of serviceable aircrafts daily.
 Plan, prioritize aircraft maintenance activities and
provide daily production report.
Quality Assurance Inspector, Changi AirBase (April
2004 – Feb 2007)
 Licensed Aircraft Engineer F-16
 Planning of audits, conduct of audits and maintaining
the audit health of workcentres.

4. Page 4 of CV for Wong Koon Meng
 Perform trending and analysis on audit findings and
generate monthly report.
 Formalize and promulgate logistic orders on work
processes, work instructions and documentation.
 Promulgation of Local Technical Orders and Local
Instructions on aircraft maintenance activities.
Airforce Flight Test Centre, Paya Lebar AirBase (June
2000 - April 2004)
 Licensed Aircraft Engineer F-16
 Lead, managed, supervised and provided training to
Instrumentation and Telemetry specialists.
 Carried out modifications, flight test plans and provide
technical support.
 Troubleshooting aircraft defects, performing schedule
maintenance and servicing on flight test aircraft.
FlightLine Expeditor, Cannon AirForce Base in New
Mexico USA(Feb 1998 – June 2000)
 Licensed Aircraft Engineer F-16
 Pioneer Core team leading in setting up of RSAF
Flightline operations in USAF Cannon Airforce Base.
 Managed and supervised aircraft maintenance
activities in flight line.
 Determine aircraft status after flight and allocate
resources to aircraft maintenance activities.
 Responded to in-flight emergency aircraft and
performing towing services.
 Participated in major exercises with USAF, NATO and
RSAF
Deputy Section Warrant Officer In-Charge, Tengah
AirBase, (Dec 1994 – Feb 1998)
 Lead, managed, supervised and provided technical
competency training to 35 specialists in the Electrical
and Instrument flight.
 Provided subject matter expert knowledge and advice
on aircraft defects, maintenance and servicing.
 Performed aircraft defects trending and analysis.
 Formalized work procedures, modification procedures,
Special Technical Instructions and Servicing
Instructions.
 Prepared and conducted presentations on aircraft
defects.
Electrical & Instrument Trade In-Charge, Luke
AirForce Base in Arizona (Feb 1992 – Dec 1994)
 Pioneer Core team leading in the setting up of RSAF
Electrical & Instrument section operating in USAF Luke
Airforce Base
 Lead, managed, supervised and provided technical
competency training to a core of 12 Electrical and
Instrument specialists.
 Troubleshooting, maintaining and performing servicing
on aircraft to ensure airworthiness.
 Review maintenance procedures, maintenance
processes, to be in line with USAF and RSAF
requirements.

5. Page 5 of CV for Wong Koon Meng
 Participated in major exercises with USAF, NATO and
RSAF
Electrical & Instrument Specialist, Tengah AirBase
(Dec 1990 – Feb 1992)
 Shift in-charge of Electrical and Instrument Flight
managing 15 Electrical and Instrument specialists.
 A subject matter expert in F-16 flight controls,
electrical and instrument systems, working in the
domains of troubleshooting, maintaining and
performing servicing on aircraft to ensure
airworthiness.
 Conduct F-16 aircraft type course on flight controls,
electrical and instrument systems.
Electrical & Instrument Specialist, Luke AirForce
Base in Arizona (Aug 1987 – Dec 1990)
 Pioneer Core team in the setting up of RSAF Electrical
& Instrument section operating in USAF Luke Airforce
Base
 F-16 specialist in troubleshooting, maintaining and
performing servicing on aircraft to ensure
airworthiness.
 Review maintenance procedures, maintenance
processes, to be in line with USAF and RSAF
requirements.
 Participated in major exercises with USAF, NATO and
RSAF
Electrical & Instrument Specialist, Tengah AirBase
(Nov 1983 – Aug 1987)
 Received on-the-job training and aircraft specialist
qualification.
 Troubleshooting, maintaining and performing servicing
on F-5 aircraft to ensure airworthiness.
 Prepared and conducted presentations on F-5 aircraft
defects.
 A subject matter expert on Stability Augmentation
System flight controls, electrical and instrument
systems on F-5 aircraft
 Conducted classroom training to new specialists and
assist in managing on-the-job training.
Electrical & Instrument Trainee, Air Engineering
Training Institute (Nov 1982 – Aug 1983)
 Received training on aircraft electrical and instrument
system.
Academic
1990 - August 1992: Ngee Ann Polytechnic
Advanced Diploma in Computer and Communication
Systems.
Modules included:
 Mathematics and Programming
 Computer Systems
 Computer Communications
 Project
 Information Processing
 Artificial Intelligence Techniques

6. Page 6 of CV for Wong Koon Meng
 DataBase Management and
Management Studies
Group project. The project developed was an Expert System on diagnostic and
troubleshooting Personal Computer problems (software and
hardware problems).
1979 – August 1982: Ngee Ann Polytechnic
Diploma in Electrical and Electronic Engineering.
Modules included:
 Diploma Qualifying Project
 Control Engineering
 Systems Engineering
 Power System Protection
 Electronic Measurement &
Instrumentation
 Industrial Management
 Electricity Supply
 Telecommunication Principles
 Digital Electronics
 Solid State Devices
 Electrical Machines
 Circuit Theory
 Engineering Maths & Computer
Programming
 Industrial Instrumentation & Control
 Engineering Drawing
 Electrical & Electronic Workshop Practice
 Principle of Electronics
 Principle of Electrical Engineering
 Engineering Drawing
 Engineering Physics
 Mechanical Work Practice
 Technical English
Group project. The project developed was a 3 phase Voltage Regulator used to
control and regulate a 3 phase Generator with a desired phase factor and loads.
1975 – December 1978: Pasir Panjang Secondary School
General Certificate of Education ‘O’ level.
Modules included:
 English language
 Chinese as a 2nd
Language
 Additional Mathematics
 Mathematics
 Physical Science
 Geometrical and Mechanical Drawing
 Electricity/ Electronics
Training and Technical Skills:
 M10 Airworthiness Administration (Air Legislation)
 Fokker 70/100 – Familiarization
 Initial Certification and Renewal of FAA Part 145 Repair Stations
 CASA Airworthiness Administration
 CASR Part 145 – Approved Maintenance Organisation
 Effective Event Investigation (Maintenance)
 CCAR Part 145
 Audit Techniques for Organisational Approval
 EASA Maintenance Requirements – Part 145/Part66
 Industry Trainer Module Certificate in Coaching Skills
 Industry Trainer Module Certificate in Instructional Skills
 Risk Management using Bow Tie
 Aircraft Maintenance Engineer Exam passed on E11, F11, F12, F13, F14
I11, I12, I13 subjects
 Mindef Auditor Course on ISO 9001:2000

7. Page 7 of CV for Wong Koon Meng
 Microsoft Office
What do I do in my spare time?
 I am a keen jogger
 I enjoy attending courses to upgrade my knowledge
 I enjoy interacting with people