The document provides product descriptions for various components of the RPS (Remote Power Supply) system, including:
1) The central office (CO) unit which enables power transfer of up to 100W via twisted pair channels at a source voltage of ±190V.
2) Remote power (RP) units like the MRODx shelf that houses DC/DC converters and control units to provide up to 900W of output power.
3) DC/DC converter modules like the PDL that combine three converters to supply 45-75W per twisted pair at input voltages from 230-380V.
4. Product description for the CO of RPS-
Eltek
Central part (CO) of Eltek:
Enables power transfer of up to
100 W via a channel (twisted pair)
Source voltage ± 190 V
Max. line current between the line
and the ground is 10 mA for 10 s
1 x Flatpack “RPS 2U Integrated“
enables power supply of up to max
2 x 1250 W (2500 W) via 24 channels
Purchased equipment:
2U shelf for DC/DC converters and
limiters
2 x Flatpack DC/DC converter
48/190 V
Issued by Iskratel; All rights reserved
2 x Flatpack 12 output channels VA
Limiter
4
5. Product description for the CO of RPS-
Eltek
Central office consists of:
A 19“ shelf
Flatpack DC/DC converter
Flatpack VA limiter
Issued by Iskratel; All rights reserved
5
6. Product description for the CO of RPS-
Eltek
Flatpack DC/DC converter
Technical data:
Input:
• 48 Vdc (40-60 V)
• Output:
• 130 Vdc/1250 W
• 190 Vdc/1250 W
Issued by Iskratel; All rights reserved
• Dimensions:
• 1U x 214 x 243 mm (HxWxD)
• It is necessary to have an even number of converters in the system to ensure the
potential of ± 190 V or 380V
6
7. Product description for the CO of RPS-Eltek
Flatpack VA Limiter
•Technical data:
•Input: ±130 Vdc/±190 Vdc
Issued by Iskratel; All rights reserved
•Output: ±190 Vdc/max. 100 W (12 channels)
•Dimensions: 1U x 214 x 243 mm (H x W x D)
7
8. Product description for the RP of RPS
MRODx - AEU2232Dx - Power Supply Shelf
Characteristics:
Enables the installation of up to four PDL
converters and an ARH control unit into the
MRODB shelf;
The total max output power is 900 W with four
PDL converters;
The rated output voltage of PDL converters is
54V;
A standard 48-pin connector at the back for
connection to the rack backplane;
Dimensions 268 mm x 250 mm x 281 mm
(WxHxD).
Additional management and control units
connected via RS485 to the MRODB shelf are:
Issued by Iskratel; All rights reserved
ARL DC measuring units;
ARK alarm units;
ARJ relay units.
8
9. Product description for the RP of RPS
MRODx - AEU2232Dx - Power Supply Shelf
One PDL DC/DC converter module can be supplied over 3 twisted pairs. One AEU2232Dx MRODx shelf can take
four DC/DC PDL converters, os one MRODx shelf can be supplied over 12 twisted pairs. The received effective
power at the max. resistance of twisted pairs of 600R is min. 12 x 45W = 540W, and max. 12 x 75W = 900W at a
minimum resistance of twisted pairs.
Output power 4 x PDL
1000
900 Twisted
pair
800 resistance
700 0
100
600
200
Pout (W)
500 300
400
400
500
Issued by Iskratel; All rights reserved
300 600
200
100
0
0 2 4 6 8 10 12
No. of pairs
9
10. Product description for the RP of RPS
PDL - POU6004AA - DC/DC converter
Characteristics:
The RFT-V version is used (complies with IEC 60950-21);
It combines three parallel-connected DC/DC converters with
the output power of 45W to 75W each, at an input voltage from
230V to 380V;
The total max. output power at 380V is 225W;
The typical input supply voltage between 230 and 380V;
The max. input supply voltage (line) can range up to ± 200V,
total 400V;
The rated output voltage is -53V;
Next to the extractor handle on the front side there are three
line connectors for the connection of twisted pairs, and three
green LEDs for the indication of an active line or a DC/DC
converter;
On the rear side there is a standard 48-pin connector to
connect to the shelf backplane;
Dimensions 270mm x 122mm x 43mm (W x H x D);
Issued by Iskratel; All rights reserved
Used for installation into the MRODx - AEU2232Dx – power-
supply shelf.
Supervision in the MRODB shelf:
Provided by the ARH control unit to which it is
connected via RS485
10
11. Product description for the RP of RPS
ARH – PNU2194AA – control unit
ARH is a standard unit of the MPS1000 system for IP
connectivity. It provides:
Communication via:
a display
a local PC
the management node (MN)
Measuring system and environment electrical values.
The front panel is provided with a display and keys for the
management of some power-supply system functions.
Issued by Iskratel; All rights reserved
11
12. Product description for the RP of RPS
Management and control (at least ARH v8 SW)
Issued by Iskratel; All rights reserved
12
13. Product description RPS10
Input voltage -48 V DC.
Max. current from 1,4 to 8,4 A.
Max. up to 6 DC/DC (6 channels).
Height 1U dept 230 mm.
19“ or ETS rack.
Force cooling (ventilation) with three ventilators.
Issued by Iskratel; All rights reserved
13
14. Technical data RPS10
Input
Input channels voltage ± 100 V do ± 190 V DC
Max. current 235 mA on channel
Fuse 2 x 1,25 A on channel
Phoenix connector max. diameter of cable 2,5 mm
EMC immunity EN 61000-6-3 class B
EMC immunity EN 61000-6-2
Issued by Iskratel; All rights reserved
14
15. Technical data RPS10
Output
Nominal voltage -53 VDC
Output current 1,4 A do 8,4 A
Max. power 72 W dup to 432 W
Static stability of voltage ± 5 %
Load sharing 5 %
Ripple < 100 mV p-p
Photometrical voltage < 2 mV RMS
Efficiency > 85 % at max. load
Issued by Iskratel; All rights reserved
Fuse 12,5 A
15