This is my CV where I have detail myself. I have the blog site as http://earningsuggestions.blogspot.com where I would like share my experiences.

1. Job Experience
1. Manager Grade-2 – Design & Planning,
Department : Production (R&D),
Division : Manufacturing, Continue from 01/02/2016
Job Responsibilities:
1. Design & Develop of Transformer for CPRI
(Central Power Research Institute, India) to take the biggest
market of power distribution section.
2. Newly Design & Develop of Electrical Sub-Station
( Three Phase Transformer, Low Tension Switchgear, High
Tension Switchgear, Power Factor Improvement Plant, etc)
including Single Phase Transformer.
3. Prepare the total industry as per ISO 9001: 2008
i. Prepare the Document for ISO Certificate
ii. QMS Manual
iii. SOP
iv. Quality control Policy
4. Preparing tender supported documents like
guaranteed technical particular sheets and tender drawings
for both tenders.
5. Make the relationship with REB, DESCO,
WZPDCL, BPDB, BMDA and BADC.
2. Assistant Manager – Design & Quality control,
Department : Production (R&D),
Division : Manufacturing, 28/01/2016 from 12/04/2015
Job Responsibilities:
1. Design & Develop of Electrical Sub-
Station ( Three Phase Transformer, Low Tension
Switchgear, High Tension Switchgear, Power Factor
Improvement Plant, etc) including Single Phase
Transformer.
2. Design of Industrial Voltage Stabilizer
(IVS), UPS, IPS, AVR, Inverter, Battery Charger and
Single layer Printed Circuit Board (PCB) etc, may be
considered as additional responsibility.
3. Preparing tender supported documents like
guaranteed technical particular sheets and tender drawings
for both tenders.
4. Produce calculations, drawings, sketches,
instructions, bills of materials (BOM) etc, for drafters and
others to follow to satisfy the requirements of the
marketing and sales team and customers specifications.
M. A. Masud Khan
S/O. M. A. Mansur Ali Khan
64/73, Nasirabad I/A, Bayazid Bostami Road,
Chittagong – 4210
Cell Phone: +8801719306383
E-mail: khan_bangladesh@yahoo.com
Career Objectives
To take up a challenging
Career grows with honesty,
loyalty, good relationship
and best performance, and
translate my experience,
knowledge, skills and
abilities into value for an
Organization especially in
the Sub-station Company.
Career Summary
After passing B.Sc Engineer
(Electronics &
Communication) I have
joined in Sena Kalyan
Electric Industries a project
of Sena Kalyan Sangstha as
an Assistant Engineer. Just
after two years basing on my
performance, honesty and
loyalty authority has given
promotion as Deputy
Manager (electric engineer).
I have been serving in Sena
Kalyan Electric Industries
since two years six months.
After that Navana
Electronics Ltd has selected
me as Assistant Manager (as
per Company organ gram) at
the design and planning. But
after about ten months Sena
Kalyan Sangstha (Deputy
Director - Business 4) again
called me because their
CPRI work and factory
extension with new project
considering my previous
record. Now-a-days I am
working at Sena Kalyan
Sanstha's Project Sena
Kalyan Electric Industries
(SKEI) as the Manager
Grade-2 from 1st February
2016.
Contribution to SKEI:
1. By the development
new design of
single phase wound
core distribution
transformer which
is cost effective and
quality products.
2. Through optimum
design and
processing, first
time Sena Kalyan
Electric Industries
has supplied 100
Pieces of 200KVA
three phase
distribution
transformers to
West Zone Power
Distribution
Company Ltd.
(WZPDCL) Khulna
in FY 2012/2013
and 150 Pcs of 200
KVA three phase
distribution
transformer to
BPDB in FY
2013/2014. Whole
activities like
conduction of
factory inspection
by BPDB Engineer,
preparation of
tender documents
and optimized
design has been
prepared by me
with the help of
Project head.
3. 1200 KVA & 2000
KVA distribution
transformer of steel
re-rolling mills has
been repaired under
my guideline and
supervision.

2. 5. Routine tests of Single and Three Phase Power Transformer
of different capacity such as winding Insulation Resistance test, Power
Frequency Withstand Test.
6. Conducting over voltage test, Vector Group Test, Ratio Test,
No Load Test and Short Circuit Test with separate source power system.
7. Type tests such as Temperature Rise Test and Impulse test
use by separate source power system and routine test of Lighting Arrestor and
Drop Out Fuse.
8. Develop design specifications, manufacturing documentation
and prepare report about improvement of product Design, Development,
Keeping the documents and records of all analysis.
9. Working with Quality Compliance and production
department regarding compliance issues.
10. Execute the product development process for consumer
Activation’s new product initiatives.
11. Must evaluate customer requirements and integrate
requirements in to the production schedule.
12. Implement special engineering projects related to design
improvements, cost reductions, new materials, new components or new
design techniques.
13. Provide daily/weekly/monthly/ half yearly and annual report
to the management for decision making.
14. Prepare the total industry as per ISO 9001: 2008
i. Prepare the Document for ISO Certificate
ii. QMS Manual
iii. SOP
iv. Quality control Policy
3. Deputy Manager (electric engineer) 07/04/2015 from 01/05/2014
Sena Kalyan Electric Industries (SKEI) (A project of Sena Kalyan
Sangstha) 64/73, Nasirabad I/A, Bayazid Bostami Road, Chittagong – 4210.
My responsibilities were as follows:
A. Product Design
1. Single and Three Phase Distribution Transformer Design &
Drawing.
B. Production& Service
1. Planning of cost effect product.
2. Monitoring and Super vision of Production Process.
3. Quality Control (Raw material and Finish Product)
4. Maintenance of Machineries and all the Electric system.
5. Make relationship with REB, DESCO, WZPDCL, BPDB,
BMDA and BADC.
6. Prepare Tender documents
7. Supervising Post Sales Customer Service
4. Assistant Engineer 01/09/2012 to 30/04/2014.
Sena Kalyan Electric Industries (SKEI) (A project of Sena Kalyan
Sangstha) 64/73, Nasirabad I/A, Bayazid Bostami Road, Chittagong – 4210.
Job responsibilities follows: As per Deputy Manager at SKEI
Current Project
At present I start a research
project to build up a FUEL
LESS BIKE, I have already
designed all of the process
and procedure and waiting
for some of device and then
practical work will be
started.
Practical Working
Knowledge on:
A- Total 33KV Sub – Station
work.
B- Auto-CAD Drawing.
C- Generator Operation and
Maintenance (Mechanical
and Electrical);
D- ICX system of Tele-
communication
E- Computer Networking
F- Machine Drive PLC and
Inverter
G- Define the fault of
Generator.
H- Basic Auto- mobile System
Extra Curriculum
 Heavy motivational power.
 Auto Gear Car Driving.
 Obtained Management and
Leadership skill by holding
the post of General
Secretary in own
Department at third year in
University.
 Performed overall scout
Leadership during study at
school and college and
finally have gone through
training on different
activities during SAARC
Gamburiy in 2006.
 Active participation in
various seminars and
cultural activities and sports
events at school, college and
university level in various
occasions as well as in
religious activities.

3. Training Experience
Baizid Group (Baizid Steel Industries Ltd, CSS Power Plant, CSS Corporation Ltd) on Power
Generation, Total Power System, Control System and Production Process.
Educational Background
Degree Department Institute CGPA
Passing
Year
B.Sc. Engg.
Electronics and Communication
Engineering
Khulna University of
Engineering & Technology
CGPA 3.21 out
of 4.00
2012
H.S.C Science Nehalpur School & College
GPA 4.90 out
of 5.00
2007
S.S.C Science Nehalpur School & College
GPA 4.94 out
of 5.00
2005
Personal Particulars
Date of Birth : 30th
December, 1990.
Father’s Name : M. A. Mansur Ali Khan.
Mother’s Name : Shahida Begum.
Nationality : Bangladeshi (by birth)
Gender : Male
Marital Status : Single
Religion : Islam
Cell Phone : +8801719306383
E-mail: khan_bangladesh@yahoo.com
Associate Member of IEB-00078
Passport No: AF4184402
Permanent Residence: Vill+P.O:- Nehalpur, P.S:- Monirampur,
Dis:-Jessore, Dhaka, Bangladesh
Present Address : 64/73, Nasirabad I/A, Bayazid Bostami Road,
Chittagong – 4210
Strong Computer Skills
 Operating Systems : Windows XP, Windows Vista,
Windows 7, Windows 8
 Programming Languages : C, C++.
 Hardware Programming :Intel 8085, 8086 Microprocessors,
Micro- controller 8051 and ATMEL 32, verilog.
 Engineering Analytical Tools : MATLAB, PSpice, Circuit
Maker, Proteus 7.7 SP2, Microwind, Packet Tracer 5.5, Electronic
Workbench and Super NEC, Multi-sim.
 Computer Networking :Completed course on CCNA
exploration 4.0at 2nd
semester
Foreign Tour:
Country and Duration: China –
18/11/2015 to 28/11/2015 –
VISA – J0663507
a. Trading Company: Shanghai
orinno International Business
Co. Ltd
Contact Person : Titan Ding
Designation of Contact Person:
Managing Director.
Mail: titanding@163.com
Phone: +8613585993310
Manufacturer: -
i. 1. Suzhou LangGong Vacuum
Technology Co. Ltd.
ii. 2. Yangzhou Jiangdu Huayu High
Voltage Electric Co. Ltd
iii. 3. Mingwan Machinery – CNC
Plasma cutter
iv. 4. Shenyang Liaoning – Around
the city and electrical equipment
factory
v. 5. Canzhoun Kenuo
Manufacturing Co. Ltd.
vi. 6. Shenfa Machinery - Jiangsu
Province Changzhou City Shenfa
Electrical Appliance Co. Ltd
vii. 7. Wujiang Transformer Co.,Ltd.
(Suzhou – China)
b. Trading Company: Nantong
Zhenhuan Trade co. Limited.
Contact Person : Franks Cao
Designation of Contact Person:
Managing Director.
Mail: sales@transformer-
machine.com
Phone: +8613962724758

4. Others Skills
 Self-motivated, energetic and reliable
 Excellent interpersonal and
communication Skills
 Friendly and co-operative personality
 Mix and communicate naturally with
all age group
 Ability to work independently as we
as in a team
 Honesty and sincerity
 Creative and initiative
 Speed in action
 Instant Decision Maker
 Can work under pressure
Language Proficiency
Good Spoken and Writing Proficiency in English and Bengali as well as read Arabic
Reference
Declaration
I, M. A. Masud Khan, certify that above information are right to the best of my knowledge. These
data correctly describe my qualifications and me.
Date:19-Aug-16 M. A. Masud Khan
Dr. MD. Foisal Hossain,
Phd, MSc Engg. BSc Engg. EEE
Designation: Assistant Professor
Department of Electronics and Communication
Engineering
Khulna University of Engineering and Technology
Khulna - 9203.
Phone: - +8801714087375
E-mail:- foisalkuet@yahoo.com
Relation: Academic
Major Md. Iqbal Hossain (Retd),Engr.
BSc Engg. (EEE)
Designation: Project Head (DGM)
Organization: Sena Kalyan Electric Industries
Address: 27 No Flat, 2 no Road Mirpur – DHOS,
Dhaka, Bangladesh.
Mobile No.: +8801912151558,
E-mail: iqbal3775@yahoo.com
Relation: Professional