The document provides guidelines for preparing an industrial internship report for the B.Tech Computer Science program at VIT University. It specifies the required report structure and formatting guidelines. The report should include sections like the cover page, declaration, bonafide certificate, acknowledgements, abstract, table of contents, chapters on the existing system, proposed work, implementation, results and conclusion. It provides examples of the cover page, declaration and bonafide certificate. Formatting details like font type, size, spacing and page margins are also defined.
1. VIT
UNIVERSITY
(Estd. u/s 3 of UGC Act 1956)
Vellore - 632 014, Tamil Nadu, India
School of Computing Science & Engineering
Format for Preparation of Industrial Internship (CSE399) Report
For
B.Tech. (CSE)
1. Arrangement of Contents:
The sequence in which the IPT report material should be arranged and bound is as follows:
1. Cover Page & Title Page
2. Declaration by the Candidate
3. Bonafide Certificate
4. Certificate by training in-charge at the industry
5. Table of Contents
6. List of Tables
7. List of Figures
8. List of Symbols, Abbreviations and Nomenclature
9. Chapters of the Report
10. Appendices
The table and figures shall be introduced in the appropriate places.
2. Page Dimension and Binding Specifications:
The dimension of the project report should be in A4 size.
Page Specification:
Left Margin : 3.5 cm
Right Margin : 3.0 cm
Top Margin : 2.54 cm / 1 inch
Bottom Margin : 2.54 cm / 1 inch
The Industrial Internship report should be bound using flexible cover with yellow colored art
paper. The cover should be printed in black letters and the text for printing should be
identical. The total number of pages in the report is minimum of 20 and maximum of 50.
Page numbers – All text pages as well as program source code listings should
be numbered using Arabic numerals at the bottom center of the pages.
Normally Body Text – Font Size: 12, Times New Roman, 1.5 Spacing, Single
Side Writing
Paragraph Heading – Font Size: 14, Bold, Times New Roman.
1
2. Section Heading and Subsection Heading – Font Size: 12, Bold, Times New
Roman.
3. Preparation Format:
3.1 Cover Page & Title Page:
As per the format given in Appendix 1.
3.2 Declaration by the Candidate:
As per the format given in Appendix 2.
3.3 Bonafide Certificate:
The Bonafide Certificate shall be in one and half line spacing using Font Style: Times
New Roman and Font Size: 14, as per the format in Appendix 3.
The certificate shall carry the signature of faculty supervisor and training officer.
3.4 Acknowledgement:
In this page, the student recognizes his indebtedness for guidance and assistance of the
training officer and faculty supervisor. Courtesy demands that he / she also recognizes
specific contributions by other persons or institutions such as libraries and research
foundations. Sometimes the nature of the contribution is described (For example, permission
for the use of equipment, facilities and documents). Acknowledgement should be expressed
simply, tastefully, and tactfully. It should carry the signature of the student, place and date at
the end. The format is given Appendix 5.
3.5 Abstract:
Abstract should be one page synopsis of the project report typed double line spacing, Font
Style: Times New Roman and Font Size: 14. The abstract is a very brief summary of the
report’s contents. It should be about half a page long not more than 500 words. The 500-word
statement should describe the problem addressed by your project, a description of the work
completed and a summary of any findings or lessons learned. It can also contain the following
in varying amounts of detail as is appropriate: main motivation, main design point, essential
difference from previous work, methodology and some eye-catching results if any.
2
3. 3.6 Table of Contents:
The table of contents should list all material following it as well as any material which
precedes it. The title page and Bonafide Certificate will not find a place among the items
listed in the Table of Contents but the page numbers of which are in lower case Roman letters.
One and a half spacing should be adopted for typing the matter under this head. A specimen
copy of the table of contents of the project report is given in Appendix 6.
3.7 List of Tables:
The list should use exactly the same captions as they appear above the tables in the text.
One and a half line spacing should be adopted for typing the matter under this head.
3.8 List of Figures:
The list should use exactly the same captions as they appear below the figures in the text.
One and a half line spacing should be adopted for typing the matter under this head.
3.9 List of Symbols, Abbreviations and Nomenclature:
One and a half line spacing should be adopted for typing the matter under this head.
Standard symbols, abbreviations etc. should be used.
3.10 Chapters:
The chapters may be broadly divided into 5 parts
1. Introduction (Hint: Introduction about area of study / Investigation in 1000
wards)
2. Study of the existing system in Industry / Company (in 500 wards)
3. Analysis / proposed work (in 1000 wards)
4. Implementation (if applicable) (in 500 wards)
5. Results and Conclusion / Discussion (in 100 wards)
3.10.1 Introduction :
The introduction is a shorter version of the rest of the report, and in many cases the
rest of the report can also have the same flow that summarizes the major contributions of the
project. This chapter should include the descriptions such as: (not necessarily in that order,
but what is given below is a logical order).
• Background [The setting of the scene of the problem].
• Problem Statement [Exact problem you are trying to solve].
• Motivation [Importance of the problem].
• Post/Related work [Existing methods including pros and cons of the methods
should be cited wherever possible].
• Challenges [Difficulty in the problem solving].
• Essence of your approach [Your method of problem solving].
• Statement of assumptions [The conditions under which your solution is
applicable].
3
4. • Main summary of the results.
• Organization of the report.
• Avoid ‘routine’ background e.g. the C programming language.
• Don’t cite endless sources that are irrelevant or that you haven’t read.
3.10.2 Overview of the Proposed System :
This chapter should include the brief description of the whole-proposed software
system that is to be developed, system preliminary design, system planning and the details of
the hardware & software used. System analysis & design vis-à-vis user requirements
(Preliminary design) should also be represented as a block diagram. System planning is
represented as either as PERT chart or as Gantt chart.
3.10.3 Design of the System:
This chapter should describe the engineering specifications and targets critically
evaluating the existing benchmarks and specifically identifying the gaps which the project is
intended to fill; It should show how the concepts evolved and were evaluated also should
describe and justify the formation of the final product which may include possibly a number
of subsections such as:
• Details of the development. System architecture indicating various modules /
components and their interaction.
• Feasibility assessment report.
• Entity relationship diagram / analysis / DFD / State Transition Diagram.
If you adopt an object-oriented method, you will include the following in this chapter:
• Sequence diagrams for each module and entire system.
• Class diagrams or any other UML diagram for each module and entire system.
3.10.4 Implementation of System:
This chapter should reflect development of the project such as: implementation,
experimentation, optimization, evaluation etc. and unit integration testing should be discussed
in detail. The unit test cases and system test cases should describe the input, expected output
and output obtained. It can also include the details of the tools used for implementation,
justification for the selected tool and the detailed description of implemented modules.
Screen shots, Pseudocode etc.
3.10.5 Results & Conclusion / Discussion:
This is part of the set of technical sections, and is usually a separate section for
experimental/design papers. This chapter should include:
• Comparison of cases with respect to existing and proposed algorithm or design.
• Performance metrics.
• Parameters under study.
• Expected and obtained results.
• Detailed results for each logical component of the project with an accompanying
discussion section [Can include screen shots, graphs etc.].
4
5. • Summarize the key aspects of your project (failures as well as successes) and
should state the conclusions you have been able to draw.
5
6. 3.11 Appendices:
Appendices are provided to give supplementary information, which is not included in
the main text may serve as a separate part contributing to main theme.
• Appendices should be numbered using Arabic numerals, e.g. Appendix 1, Appendix 2
etc.
• Appendices, tables and references appearing in appendices should be numbered and
referred to at appropriate places just as in the case of chapters.
• Appendices shall carry the title of the work reported in it and the same title shall be
used in the contents page also.
3.12 List of Tables and Figures:
The table includes the tabulated numerical data in the body of the report as well as in
the appendices. All other non-verbal materials used in the body of the work and appendices
such as charts, graphs, maps, photographs and diagrams may be designated as figures.
4. Typing Instructions:
The impression on the typed copies should be black in color. One and a half spacing
should be used for typing the general text. The general text shall be typed in the Font style:
Times New Roman and Font size: 12.
6
7. (A typical specimen of cover page & title page)
TITLE OF THE IPT REPORT
<Font size 18> <1.5 line Spacing>
An Industrial Internship Report
<Font size 14>
submitted by
<Font size 14> <Italic>
NAME OF THE CANDIDATE
<Font size 16><Bold>
(Reg. No.)
<Font size 14><Bold>
in partial fulfillment for the award of the degree of
<Font size 14><Italic>
NAME OF THE DEGREE
<Font size 16><Bold>
in
BRANCH OF STUDY
<Font size 14><Bold>
VIT
UNIVERSITY
(Estd. u/s 3 of UGC Act 1956)
Vellore - 632 014, Tamil Nadu, India
SCHOOL OF COMPUTING SCIENCE AND ENGINEERING
<Font size 16> <Bold>
MONTH & YEAR
<Font size 14>
7
8. DECLARATION BY THE CANDIDATE
I hereby declare that the Industrial Internship report entitled “TITLE OF THE
REPORT” submitted by me to Vellore Institute of Technology, Vellore in
partial fulfillment of the requirement for the award of the degree of <Name of
the Degree> in <Branch Name> is a record of bonafide industrial training
undertaken by me under the supervision of <Name of the training in-charge at
the industry and VIT faculty supervisor>. I further declare that the work
reported in this report has not been submitted and will not be submitted, either in
part or in full, for the award of any other degree or diploma in this institute or
any other institute or university.
<Font size 14><1.5 line spacing>
Vellore: Signature of the Candidate
Date:
8
9. (A typical specimen of Bonafide Certificate)
VIT
UNIVERSITY
(Estd. u/s 3 of UGC Act 1956)
Vellore - 632 014, Tamil Nadu, India
School of Computing Science & Engineering
<Font size 16>
BONAFIDE CERTIFICATE
<Font size 16><underlined>
This is to certify that the Industrial Internship report entitled “TITLE OF THE
REPORT” submitted by <STUDENT NAME>(<Reg.No.>) to Vellore
Institute of Technology, Vellore in partial fulfillment of the requirement for the
award of the degree of <Name of the degree> in <branch name> is a record of
bonafide Industrial Internship undertaken by him/her under my supervision.
The training fulfills the requirements as per the regulations of this Institute and
in my opinion meets the necessary standards for submission. The contents of
this report have not been submitted and will not be submitted either in part or in
full, for the award of any other degree or diploma in this institute or any other
institute or university.
<Font size 14><1.5 line spacing>
<Signature of the Supervisor>
Name>
SUPERVISOR
<Academic Designation>
Date: Date:
<Signature> <Signature>
Internal Examiner (s) External Examiner (s)
9
10. <It should be in the Company Letter Head>
<Date: …………….…..>
CERTIFICATE BY THE TRAINING OFFICER
<Font size 16>
This is to certify that the project report entitled “TITLE OF THE REPORT”
submitted by <STUDENT NAME>(<Reg.No.>) to Vellore Institute of
Technology, Vellore in partial fulfillment of the requirement for the award of
the degree of <Name of the degree> in <branch name> is a record of bonafide
Industrial Internship undertaken by him/her under my supervision. The training
fulfills the requirements as per the regulations of this Institute and in my opinion
meets the necessary standards for submission. The contents of this report have
not been submitted and will not be submitted either in part or in full, for the
award of any other degree or diploma in this institute or any other institute or
university.
<Font size 14><1.5 line spacing>
<Signature of the External Supervisor>
<Name>
TRAINING OFFICER
<Designation of the training incharge >
<Full address of the Organization
With e-mail id, phone no.>
<Seal of the Organization>
10
11. Appendix 5
<Font style Times New Roman>
ACKNOWLEDGEMENT
<Font size 14><Underlined><Bold>
<Body>
Place : Vellore <Signature of the Student>
(Name of the Student)
Date :
11
12. (A typical specimen of table of contents)
<Font style Times New Roman>
TABLE OF CONTENTS
CHAPTER NO. TITLE PAGE NO.
LIST OF TABLES xvi
LIST OF FIGURES xviii
LIST OF SYMBOLS xxvii
1. INTRODUCTION 1
1.1 General 1
1.2 ………….. 2
1.2.1. General 5
1.2.2 ………. 12
1.2.2.1 ………… 19
1.2.2.2 ………… 25
1.2.2.3 ………… 29
1.2.3 ………….. 30
1.3 …………….. 45
1.4 ……………. 58
12