1.
ADDRESSING
MODES
MUKTA GARG
ASSISTANT PROFESSOR
ADVANCED EDUCATIONAL INSTITUTE
www.advanced.edu.in

2.
www.advanced.edu.in
THE ADDRESSING MODE
Specifies a rule for interpreting or modifying the address field of the instruction before the operand is
actually referenced.
THE OPERATION FIELD OF AN INSTRUCTION SPECIFIES THE OPERATION TO BE PERFORMED.
THIS OPERATION MUST BE EXECUTED ON THE DATA STORED IN COMPUTER REGISTERS OR THE MEMORY
WORDS.
THE WAY THE OPERANDS ARE CHOSEN DURING PROGRAM EXECUTION IS DEPENDENT ON THE ADDRESSING
MODE OF THE INSTRUCTION.

3.
www.advanced.edu.in
COMPUTERS USE ADDRESSING MODE TECHNIQUES FOR THE PURPOSE OF ACCOMODATING THE
FOLLOWING PURPOSES:-
To give programming versatility to the user by providing such facilities as pointers to memory,
counters for loop control, indexing of data and various other purposes.
To reduce the number of bits in the addressing field of the instructions.

4.
www.advanced.edu.in
To understand the various addressing modes, It is imperative that we understand the basic operation cycle of the
computer. The control unit of a computer is designed to go through an instruction cycle that is divided into
3 major parts:-
1. Fetch the instruction from memory
2. Decode the instruction, and
3. Execute the instruction.

5.
There is 1 register in the computer called the program counter or PC that keeps track of the instructions in the
program stored in memory.
¤ PC holds the address of the instructions to be executed next and is incremented each time an instruction is fetched
from memory.
¤ The decoding of the instruction that is to be done in the next step tells which operation is to be performed, the
addressing mode of the instruction, and the location of the operands.
¤ The computer then executes the instruction and returns to the step1, i.e. to fetch the next instruction.
www.advanced.edu.in
PROGRAM COUNTER:

6.
MODE FIELD
An example of an instruction format with a distinct addressing mode field is
shown below:
Opcode Mode Address
The mode field is used to locate the Operands needed for the operation. There
may or may not be the address field in the instruction.
www.advanced.edu.in

7.
Although most addressing modes modify the address field of the instruction, there are two modes that
need no address field at all:
1.) Implied mode
2.) Immediate mode.
IMPLIED MODE:
In this mode the operands are specified implicitly in the definition of the instruction.
For example:-
“compliment accumulator” is an implied-mode instruction because the operand in the
accumulator register is implied in the definition of the instruction. In fact, all register
reference instructions that use an accumulator are implied-mode instructions.
www.advanced.edu.in

8.
Immediate mode
In this mode the operand is specified in the instruction itself. In other words, an
immediate-mode instruction has an operand field rather than an address field.
The operand field contains the actual operand to be used in conjunction with the
operation specified in the instruction.
Note: It was mentioned previously that the address field of an instruction
may specify either a memory word or a processor register. When the
address field specifies a processor register, the instruction is said to be in
register-mode.
www.advanced.edu.in

9.
www.advanced.edu.in
Register mode:
In this mode the operands are in registers that reside within the C.P.U.
The particular register is selected from the register field in the instruction.
A K-bit field can specify any one of 2k registers.
Register indirect mode:
In this mode the instruction specifies a register in the CPU whose contents give the address of the operand in the memory.
In other words, the selected register contains the address of the operand rather than the operand itself.
Before using a register indirect mode instruction, the programmer must ensure that the memory address of the operand is placed
in the processor register with a previous instruction.
Advantage:
The address field of the instruction uses fewer bits to select a register than would have been required to specify a memory address
directly.

10.
Auto increment or auto decrement
www.advanced.edu.in
This is similar to register indirect mode except that the register is incremented or
decremented after (or before) its value is used to access memory.
When the address stored in the registers refers to a table of data in memory, it is
necessary to increment or decrement the registers after every access to the table.
This can be achieved by using the increment or decrement instruction. In some
computers it is automatically accessed.
The address field of an instruction is used by the control unit in the CPU to obtain the
operands from memory.
Sometimes the value given in the address field is the address of the operand, but
sometimes it is the address from which the address has to be calculated.
For that we need to know about the concept of ‘EFFECTIVE ADDRESS’.

11.
www.advanced.edu.in
Effective address:
The effective address is defined to be the memory address obtained from the
computation dictated by the given addressing mode.
The effective address is the address of the operand in a computational-type instruction.
DIRECT ADDRESS MODE:-
In this mode the effective address is equal to the address part of the instruction. The
operand resides in memory and its address is given directly by the address field of the
instruction.

12.
www.advanced.edu.in
INDIRECT ADDRESS MODE:
In this mode the address field of the instruction gives the address where the effective address is
stored in memory.
Control unit fetches the instruction from the memory and uses its address part to access memory
again to read the effective address.
Some addressing modes requires the following calculation to generate the effective address:
Effective address= address part of instruction+content of CPU register

13.
RELATIVE ADDRESSMODE
In this mode the content of the program counter is added to the address part of the instruction in order
to obtain the effective address.
The address part of the instruction is usually a signed number(either a +ve or a –ve number).
When the number is added to the content of the program counter, the result produces an effective
address whose position in memory is relative to the address of the next instruction.
INDEXED ADDERESSING MODE:
In this mode the content of an index register is added to the address part of the instruction to obtain the
effective address.
The index register is a special CPU register that contains an index value.
NOTE: If an index-type instruction does not include an address field in its format, the instruction i.e.
automatically converted to the register indirect mode of operation.
www.advanced.edu.in

14.
BASE REGISTER ADDRESSING MODE
In this mode the content of a base register is added to the address part of the instruction
to obtain the effective address.
This is similar to the indexed addressing mode except that the register is now called a
base register instead of the index register.
The base register addressing mode is used in computers to facilitate the relocation of
programs in memory.
When programs and data are moved from one segment of memory to another.
www.advanced.edu.in

15.
NUMERICAL EXAMPLE
PC=200
R1=400
XR=100
AC
LOAD TO AC
MODE
ADDRESS=500
NEXT INSTRUCTION
450
700
800
900
325
300
ADDRESS
MEMORY
200
201
202
399
400
500
600
702
200www.advanced.edu.in

16.
ADDRESSING EFFECTIVE CONTENT
MODE ADDRESS TO AC
DIRECT ADDRESS 500 800
IMMEDIATE OPERANDS 201 500
INDIRECT ADDRESS 800 300
RELATIVE ADDRESS 702 325
INDEXED ADDRESS 600 900
REGISTER ---- 400
REGISTER INDIRECT 400 700
AUTOINCREMENT 400 700
AUTODECREMENT 399 ` 450
www.advanced.edu.in

17.
Mukta Garg
Assistant Professor
Advanced Educational Institute
Advanced Educational Institutions,
70 km Milestone,
Delhi-Mathura Road, Dist. Palwal, Haryana-121105
+91–1275–398400, 302222
Rahul.sharma90@gmail.com
www.advance.edu.in
www.advanced.edu.in