220 KV GRID SUB STATION KUNDA KI DHANI JAIPUR
SUBMITTED TO:- SUBMITTED BY:-
Mr. WAHID KHAN OM PRAKASH MAHAWAR
SHANKARA INSTITUTE OF TECHNOLOGY,
RAJASTHAN TECHNICAL UNIVERSITY, KOTA
In India Electrecal power is Generated at a voltage
of 11kv to 33kv ,which is taken stepped up to the
transmission level in the range of 66kv to 400kv
member of transmission and switching have to be
created these are known as ”Substation”.
Substation is an assembly of apparatus ,which
transform the characteristics of electrical energy
from one form to another say from one voltage
level to another level. hence a substation is an
Intermediate link between the Generating station
Fig.1 – 220 KV GSS ,KUNDA KI DHANI , AMER
Substations have switching, protection and control equipment and one
or more transformers. In a large substation, circuit breaker are used to
interrupt any short-circuits or overload currents that may occur on the
220KV KUNDA KI DHANI GRID
220kv kunda kidhani, amer is a conventional, hybrid
It is part of transmission system.
33kv substation is gas insulated substation which is
inside the control room.
for communication purpose PLCC is used.
SINGLE LINE DIAGRAM
Lightning arrestor provide protection to all the
equipment against the HV.an electric discharge
between cloud and earth ,between cloud and
charge enters of some loud is known as lightning.
It is provide to safety transmission &distribution
An electrical insulator is
a material whose
internal electric charge
do not flow freely and
therefor make it very
hard to conduct an
electric current under
the influence of an
•For stepping up or down the system voltage, power transformers are used in
the substations. At generating end, the voltage is only stepped up for
transmission of power while at all the subsequent substations the voltage is
gradually stepped down to reach finally to working voltage level
transformer are used to
stepped down .
It is used to
Circuit breaker are used for
switching and protection.
Brake a circuit and
automatically under fault
A circuit breaker consist of
fixed and moving contact
called electrode under
Bus bars are common
through which a
large no. of feeders
operating at some
voltage have to
It is used to connect
to transmission line
which go to
It is used to high
A Protective relay is a
device which detect
It is to detect after
their go to command
It is provide to safety
An Engineer need to have not just theoretical but
practical as well as and so every student is supposed to
under go a practical training .session after 3rd year
where I have impaired the knowledge about
transmission ,distribution .during the 60 days training
session. we have acquainted with the repairing of a
transformer and testing of transformer. At last is
would like to say that practical training taken at 220kv
gss , kunda ki dhani, amer has broadened my knowledge
and widened my thinking as a professional.
Parece que tiene un bloqueador de anuncios ejecutándose. Poniendo SlideShare en la lista blanca de su bloqueador de anuncios, está apoyando a nuestra comunidad de creadores de contenidos.
¿Odia los anuncios?
Hemos actualizado nuestra política de privacidad.
Hemos actualizado su política de privacidad para cumplir con las cambiantes normativas de privacidad internacionales y para ofrecerle información sobre las limitadas formas en las que utilizamos sus datos.
Puede leer los detalles a continuación. Al aceptar, usted acepta la política de privacidad actualizada.