V Prabu Phone: 9789912990|E-mail:
vprabu2009@gmail.com
73/92, Vijayalakshmi Street, Kamaraj
Nagar,
New Perungalathur, Chennai
600063.
CAREER OBJECTIVE
Seeking a challenging position as a Technical Personnel in your esteemed organization,
where my qualification, skills & experience can contribute to the growth of the company
and thereby providing me a career growth.
PROFESSIONAL EXPERIENCE
13 years of Professional experience ( including 6 months deputation experience in
Saudi Arabia) in the field of “PIPING DESIGN” for heavy industrial engineering of Oil &
Gas, Offshore FPSO, Refinery, Chemical & Petrochemical sector projects (on-shore &
off-shore). I’m currently employed in Valdel Engineering and Constructors.
SOFTWARE TOOLS USED
1. Plant Design Management System – PDMS (ver 12.6)
I. Equipment Modeling
II. Piping Designer
III. Iso Draft
IV. MDS Modeling
2. Plant Design System – PDS
I. PDS Proficiency
II. Equipment Modeling
III. Piping Designer
IV. Isometric Drawing Manager
V. Drawing Manager
3. SP3D
4. AutoCAD & Micro station
5. Review Tools
I. Review Reality
II. Smart Plant Review
III. Navis Works

KEY RESPOSIBILITIES
1. Review & Updating Plot Plans.
2. Developing Equipment Layout & Area Division Drawings.
3. Equipment Modeling, Piping Modeling, Support Marking & ISO Extracting By Using
PDS & PDMS.
4. Piping Study & Modeling for Pipe Rack Piping & Battery Limit Piping , Vessel Piping,
Exchanger Piping, Air Fin Cooler Piping, Pump Piping, Compressor piping, Reactor
piping ,Flare Piping, Control Valve, PSV Piping & Arrangement of PSV platform.
5. Creation of Nozzle Orientation Drawings for Vessel.
6. Review of MDS, Vendor drawings and Process Document like Process P&ID etc.
7. Coordination with other departments.
8. Support selection for non critical lines & Selection of Secondary Support.
9. Checking of piping Isometric Drawing for construction (AFC).
10. Preparation of Piping MTO (Bill of material).
11. Preparation of piping general arrangement drawings.
ORGANIZATIONAL EXPERIENCE
Valdel Engineering and Constructors.| Piping Engineer|December 2014 to Present|
Bangalore
Client: Petro Peru
Project: Petro Peru (Talara HTD), Peru|Onshore
Responsibilities:
 Finalizing the Nozzle orientation
 Checking of piping Isometric drawing for construction
 Preparation of piping MTO Isometrics
 Modeling of Piping all large and small bores on the process area
 Modeling of equipment, platform bracings, pipe support clip
 Reviewing of vendor drawings, civil foundation and structural drawings.
 Technical co-ordination with other departments like process, civil, electrical and
control systems.
Technip India Ltd.|Jr. Pipng Engineer|November 2008 to November 2014|Chennai
Client: Dong Energy
Project: , Denmark North Sea|Offshore
Responsibilities:
 Responsible for 460P process area, heat exchanger, vessel, Fuel gas recovery
package, MP cooler and filters.
 Finalizing the Nozzle orientation and Platform location

 Modeling of Piping all large and small bores on the process area
 Modeling of equipment, platform bracings, pipe support clip
 Reviewing of vendor drawings, civil foundation and structural drawings.
 Technical co-ordination with other departments like process, civil, electrical and
control systems.
 Selection of Pipe supports as per the Stress Sketch using MDS.
Client: SHELL.
Project: PFLNG (Prelude Floating Liquefied Natural Gas) Australia|Offshore
Responsibilities:
 Responsible for 4S1 utility area, cooling water pump, nitrogen package, air
compressor package and expansion vessels.
 Vendor drawing review & comments
 Client Design Review meeting and updating the Client requirements.
 Coordinating with Civil & Structural and Mechanical departments.
 Making Nozzle orientation for vessels.
 Issuing of IFC isometrics and piping GAD for the utility area.
Client: Saudi AramCo Total Refinery Project (SATORP)
Project: Jubail Export Refinery –Al-Jubail, Saudi Arabia|Onshore
Fluid Catalytic Cracking (FCC) Unit
Responsibilities:
 Was in deputation in Saudi Arabia for 6 months as Piping Design Engineer.
 Site modification and process comments as built Updation.
 Other discipline drawing comments.
 Client Design Review meeting and updating the Client requirements.
 Vendor drawing review & comments for heat exchangers.
 Coordinating with process and civil for the layout requirements.
 Issuing of IFC isometrics and piping support modeling activities.
Client: Essar Oil Refinery Project
Project: Essar Projects (I) Ltd. |Onshore
Responsibilities:
 Equipment, Piping & Support modeling using PDS.
 Checking clashes report and conflict reports.
 Generating piping GAD using orthogen.
 Attended the Projects reviews from30% to90% internal and external reviews.
 Preparing and checking of isometrics as per designer check list.
 Coordinated with Other disciplines.

Client: Nama Epoxy 120K Expansion Project – Saudi Arabia
Project: Nama Projects Saudi Arabia |Onshore
Responsibilities:
 Involved Detailing piping design in pipe rack and utility tank form.
 Pipe routing for large bores and small bores as per support feasibility.
 Commenting on platform/structural drawings.
 Coordinating with Civil and Mechanical department.
 Making nozzle orientation for vessels and vendor drawing comments.
 IFC Isometric generation.
 Preparation of piping layouts using Drawing manager.
Larsen & Toubro Ltd.| Piping Draftsman|April 2008 to October 2008|Mumbai
Client: Indian Oil Corporation Limited (IOCL)
Project: Rajasthan northern area development project
The Project involves Revamping & expansion of the facilities at Mangla & raageshwari, Rajasthan,
India.
Avant-Grade Engineers & Consultants Ltd.| Piping Designer|March 2007 to March 2008|
Chennai
Client: Seimens Ltd.
Project: Chettinad Cement Corporation Ltd.
The Project involves power plant design in Piping.
Client: Seimens Ltd.
Project: RajaSree Sugars & Chemical Ltd.
Responsibilities:
 Preparation of Piping Arrangement Drawing.
 Preparation of Isometric Drawing.
 Preparation of Bill of Materials.
 Preparation of Piping Support Detail Engineering
Seshasayee Paper Board.| Piping Draftsman|October 2002 to February 2007|Chennai
(Deputed from Bibrain Engg. Pvt Ltd)
Project Handled:
 TamilNadu NewsPaper Ltd.
 ITC Paper Mills Ltd.
 JK Paper Ltd.

Responsibilities:
 Preparation of Piping Arrangement Drawing.
 Preparation of Isometric Drawing.
 Preparation of Bill of Materials.
 Preparation of Piping Support Detail Engineering
ACADEMICS
Qualification Institute Percentage
Bachelor Of Technology (Part
Time)
(B.Tech Mechanical
Engineering)
SRM University
Chennai , Tamil Nadu First Class
DME
Diploma in Mechanical
Engineering
P.V.Polytechnic College.
Tindivanam, Tamil Nadu
First Class
PERSONAL DETAILS
Name : V.Prabu
Father’s Name : P.Vethapuri
Date Of Birth : 19-12-1982
Nationality : Indian
Passport No : L6224361
Languages Known : English, Tamil
Martial Status : Married
Mobile No : +91 9789912990
Temporary Address : 73/92, Vijayalakshmi Street,

Kamaraj Nagar,
New Perungalathur,
Chennai – 600063.
Permanent Address : Kulathu St, Aviyur Post, Gingee Tk,
Villupuran Dt.- 604203
Tamil Nadu.
Date:
(V.Prabu)
Place:

Kamaraj Nagar,
New Perungalathur,
Chennai – 600063.
Permanent Address : Kulathu St, Aviyur Post, Gingee Tk,
Villupuran Dt.- 604203
Tamil Nadu.
Date:
(V.Prabu)
Place: