3. Gravity die castingGravity die casting
processprocess
Mazak, an alloy of Zinc and aluminium, is firstMazak, an alloy of Zinc and aluminium, is first
melted in a crucible furnace.melted in a crucible furnace.
Molten metal is then poured by ladle in to anMolten metal is then poured by ladle in to an
open steel mould where it is allowed to cool andopen steel mould where it is allowed to cool and
solidify.solidify.
4. Gravity die casting processGravity die casting process
The mould is then turned upside down andThe mould is then turned upside down and
tapped with a hammerto release the finishedtapped with a hammerto release the finished
casting.casting.
Gravity die casting requires minimal finishingGravity die casting requires minimal finishing
and waste as minimal because excess metal canand waste as minimal because excess metal can
be melted down and used again.be melted down and used again.
5. Things that you may recogniseThings that you may recognise
Things that are made fromgravity dieThings that are made fromgravity die
casting are:casting are:
Toaster-Toaster-
Lawnmowers -Lawnmowers -
Carwheel rims -Carwheel rims -
6. Identifying the processIdentifying the process
When something has been created byWhen something has been created by
gravity pressure die casting there wouldgravity pressure die casting there would
be:be:
Section hair linesSection hair lines
ejector pin marksejector pin marks
sprue and runner markssprue and runner marks
7. MaterialsMaterials
The materials used in gravity die castingThe materials used in gravity die casting
is a mixture of Zinc and aluminium.is a mixture of Zinc and aluminium.
Zinc -Zinc -
Aluminium-Aluminium-
9. High Pressure Die CastingHigh Pressure Die Casting
Forcing metal underhigh pressure toForcing metal underhigh pressure to
forma mould.forma mould.
These moulds are called dies and are madeThese moulds are called dies and are made
fromsteel.fromsteel.
This produces non-ferrous metals.This produces non-ferrous metals.
11. What is made fromthe processWhat is made fromthe process
In this process you can make:In this process you can make:
Golf club heads -Golf club heads -
Carengine blocks -Carengine blocks -
Radiators -Radiators -
12. High pressure die castingHigh pressure die casting
processprocess
First the mould is sprayed withFirst the mould is sprayed with
lubricant and closed.lubricant and closed.
Molten metal is then injected intoMolten metal is then injected into
the mould under high pressure.the mould under high pressure.
13. High pressure die castingHigh pressure die casting
processprocess
Once the cavity is filled, the pressure isOnce the cavity is filled, the pressure is
kept at a steady level until the casting haskept at a steady level until the casting has
become solid.become solid.
Finally, the die is opened and the castingFinally, the die is opened and the casting
is injected.is injected.
14. Identifying the processIdentifying the process
When something has been created dyWhen something has been created dy
high pressure die casting there wouldhigh pressure die casting there would
also be:also be:
Section hair linesSection hair lines
ejector pin marksejector pin marks
sprue and runner markssprue and runner marks