How to set up a new Dell Computer? By Dell Support Center US
There are few things that needs to be taken care of before we start using any computer such as surfing internet or playing games. We need to assure that the hardware components of your desktops are properly Connected and need to check if the latest updates are installed properly to experience the best performance of your device.
Dell Support Center US((888) 216-8854)- How To Setup New Desktop
1. BY DELL SUPPORT CENTER US :(888) 216-8854
How to set up a New Dell Computer?
There are few things that needs to be taken care of before we start using any computer such as surfing
internet or playing games. We need to assure that the hardware components of your desktops are
properly Connected and need to check if the latest updates are installed properly to experience the best
performance of your device.
2. Setting up a Dell Desktop Computer?
Unpack your dell components. Depending on your purchase and the components selected the
following items may vary.
1. CPU Tower: If you have purchased just a tower that this may be all you have. You will
require few additional items such as a Monitor, Keyboard and a mouse to start using a
computer.
2. Monitor :If you are using an old monitor than you just needs to connect it to the tower
with the cable attached with it as not all towers comes with monitors.
3. Keyboard & Mouse: Most complete computers comes packed with both of these. You
can always replace these with a better-quality peripheral depending upon your use.
4. Speakers : These are not always included but sometimes it in built in monitors.
5. Printers : It needs to be purchased separately as it does not come packed with the
computers.
How to Connect the monitor to the Dell tower?
Into one of you ports on the back of your tower plug in your monitor or TV. Mostly on modern
computers we use HDMI Or DVI ports, but with some older versions you may have to connect with VGA.
The monitor needs to be plugged into a power Outlet. And incase you have a dedicated graphic card
then you need to ensure that it connects to the graphic card and just not the monitor, if not then you
will not be able to take the advantage of your graphic card. You will find the graphic card port on the
lower back of your tower.