The document provides instructions for assembling and programming a 3D printed robot named Bob. It lists the required materials which include a 3D printed body and servo parts for Bob, an Arduino Nano, jumper wires, a USB cable and the Arduino IDE software. It then outlines the 14 step assembly process which involves printing parts, attaching servos, connecting wires and uploading code. Finally, it includes a connection diagram showing how to wire the four servos to the Arduino.
8. Arduino Nano
Arduino is an open source electronics platform to develop electronic
prototypes & products.
Fun Do Labs2
9. Arduino Cable
It is called Type A/B (USB A to Mini B) cable and is used for connecting
Arduino to PC. Arduino Nano only work with Mini Type B USB cable
Fun Do Labs2
10. Jumper Wire Male to Female
Jumper wire is used for interconnect the components without soldering.
Male to Female has pin at one end & connector at other end
Fun Do Labs2
11. Arduino Software (IDE)
To communicate between software and hardware we need to use
Arduino IDE
Fun Do Labs2
12. How to Use Arduino with PC
Connect PC with Arduino Type A/B (USB A to Mini B) cable
Fun Do Labs2
13. Arduino Software (IDE)
Open the Arduino IDE with code which is available in github
https://github.com/fun2dolabs/ArduinoForKids/
tree/master/Bob
Fun Do Labs2