An assembly of components A,B and C is shown in the Figure below. Parts A and B are assembled into hole C. Components A,B and C are manufactured with the following characteristics: A=1.0,B=2.0,C=3.013,A=0.002,B=0.002 and C=0.004. The specifications for the assembly Gap are: LSL no less than 0.000, and USL no greater than 0.020 . What fraction of the assemblies will NOT meet the Gap specification? What is the fraction non-conforming? 0.015290.080500.0206130408610.006660.0004980.112764.