Se ha denunciado esta presentación.
Utilizamos tu perfil de LinkedIn y tus datos de actividad para personalizar los anuncios y mostrarte publicidad más relevante. Puedes cambiar tus preferencias de publicidad en cualquier momento.
Advanced Protection Technologies Overview of UL 1449 Third Edition Narrated by: Robert Stanley
Surge Protection.. MOV/SPD Load ..in ACTION!
Surge Protection.. MOV/SPD Load ..in ACTION!
UL 1449  THIRD  Edition Safe Surge Protection  Specification  Interpretation  Ordering Procedures Product Applications Nex...
UL 1449  THIRD  Edition <ul><li>Combine TVSS and Surge Arresters </li></ul><ul><li>into one UL Standard, UL 1449 3 rd </li...
UL 1449  THIRD  Edition & 2008 NEC Art 285 <ul><li>Changing term TVSS to SPD  TVSS  SPD </li></ul><ul><li>Creates Types 1,...
UL 1449  THIRD  Edition & 2008 NEC Art 285 <ul><li>Changing term TVSS to SPD  TVSS  SPD </li></ul><ul><li>Creates Types 1,...
UL 1449-3 & 2008 NEC Art 285 SPD Types: Types 1, 2, 3 & 4 Based on Location within electrical distribution system Trans Me...
UL 1449  THIRD  Edition Performance Test Format Changed  New Testing uses Six (6) Times More Energy Old – 6kV / 500A Suppr...
New Clamping Voltages
UL 1449  THIRD  Edition I nominal Testing – In - (Nominal Discharge Current) - New Concept to USA – Originated from IEC 61...
What to look for in a spec….
… continued
APT offers a full breadth of Type 1 and Type 2 SPD’s. Our Type 1 SPD’s use Large Block 50kA MOV’s that have Thermal Protec...
SPD Products from Advanced Protection Technologies <ul><li>Low UL 1449 Third Edition VPRs – Voltage Protection Ratings </l...
XB Series Dependable protection at Service Entrance, Distribution Panels and Downstream <ul><li>Redundant Suppression Modu...
XA Series For Critical Loads at Service Entrance Switchboards/Switchgear <ul><li>XAS: Standard modes (L-N, L-G, L-L, N-G) ...
TE/XGA Series   Full Featured workhorse for service entrance, distribution and branch panels. <ul><li>All modes: L-N, L-G,...
TE/HP TE/HP Series   Dependable protection at service entrance, distribution panels and downstream. <ul><li>All modes: L-N...
TE/HPS TE/HPS Series   Budget conscious protection for service entrance, distribution and branch panels. <ul><li>All modes...
XDS Series For Distribution and Branch Applications <ul><li>All modes: L-N, L-G, L-L, N-G </li></ul><ul><li>Surge Current ...
XCS Series For Branch Panel Applications <ul><li>All modes: L-N, L-G, L-L, N-G </li></ul><ul><li>Surge Current Rating: 100...
SPD EE  Series <ul><li>Versatile – Numerous voltage configurations: </li></ul><ul><li>1Pole, 2 Pole (Split Phase), 3 Phase...
APT DIN Rail Surge Protection Devices <ul><li>APT AC DIN Rail mounted SPDs are designed for downstream load protection. Th...
Qualifying things to know: <ul><li>System Voltage </li></ul><ul><li>Panel Information </li></ul><ul><li>Panel Amperage </l...
Qualifying things to know: <ul><li>System Voltage </li></ul><ul><li>Panel Information </li></ul><ul><li>Panel Amperage </l...
APT SPD - Ordering
Verifying at www.UL.com <ul><li>Click </li></ul><ul><li>Certifications </li></ul>Category Code  #’s: XUHT for TVSS (<Oct 0...
APT – the answer to all your surge protection needs!!!   <ul><li>Some of our services include: </li></ul><ul><ul><li>Compe...
Thank you for your time!
Próxima SlideShare
Cargando en…5
×

Apt 3rd Edition Presentation

1.973 visualizaciones

Publicado el

Publicado en: Tecnología, Empresariales
  • Sé el primero en comentar

Apt 3rd Edition Presentation

  1. 1. Advanced Protection Technologies Overview of UL 1449 Third Edition Narrated by: Robert Stanley
  2. 2. Surge Protection.. MOV/SPD Load ..in ACTION!
  3. 3. Surge Protection.. MOV/SPD Load ..in ACTION!
  4. 4. UL 1449 THIRD Edition Safe Surge Protection Specification Interpretation Ordering Procedures Product Applications Next Generation of SPD Products and Features Our Services and Support Today you will leave here knowing….
  5. 5. UL 1449 THIRD Edition <ul><li>Combine TVSS and Surge Arresters </li></ul><ul><li>into one UL Standard, UL 1449 3 rd </li></ul><ul><li>Edition renamed: </li></ul><ul><li>Surge Protective Devices (SPDs) </li></ul><ul><li>Effective: Sept 29, 2009 </li></ul>SPD TVSS Surge Arresters <ul><li>New SPD Types: Types 1, 2, 3 & 4 </li></ul><ul><li>New Voltage Protection Ratings (VPRs) replace </li></ul><ul><li>old-style Suppressed Voltage Ratings (SVRs) </li></ul><ul><li>New I nominal ratings </li></ul><ul><li>Bid Specifications become Obsolete as product </li></ul><ul><li>evaluation & ratings change </li></ul>
  6. 6. UL 1449 THIRD Edition & 2008 NEC Art 285 <ul><li>Changing term TVSS to SPD TVSS SPD </li></ul><ul><li>Creates Types 1, 2, 3 & 4 SPDs </li></ul><ul><ul><li>Type 1 – Installed on line or load side of Main OCP - similar to what you knew as SSA, except now includes rigorous safety testing. Includes all OCP & safety apparatus inside SPD </li></ul></ul><ul><ul><li>Type 2 – Installed on load side of Main OCP - similar to what you know as hardwired TVSS. May require external OCP </li></ul></ul><ul><ul><li>Type 3 – Point of Utilization – direct plug in - similar to what you know as surge strips - 10 meters from panel (rational based on being IEEE Cat. A location) </li></ul></ul><ul><ul><li>Type 4 – surge suppression components, could be basic component or complete module. Type 4 components can be tested for Type 1, Type 2 or Type 3 applications. </li></ul></ul>X X
  7. 7. UL 1449 THIRD Edition & 2008 NEC Art 285 <ul><li>Changing term TVSS to SPD TVSS SPD </li></ul><ul><li>Creates Types 1, 2, 3 & 4 SPDs </li></ul><ul><ul><li>Type 1 – Installed on line or load side of Main OCP - similar to what you knew as SSA, except now includes rigorous safety testing. Includes all OCP & safety apparatus inside SPD </li></ul></ul><ul><ul><li>Type 2 – Installed on load side of Main OCP - similar to what you know as hardwired TVSS. May require external OCP </li></ul></ul><ul><ul><li>Type 3 – Point of Utilization – direct plug in - similar to what you know as surge strips - 10 meters from panel (rational based on being IEEE Cat. A location) </li></ul></ul><ul><ul><li>Type 4 – surge suppression components, could be basic component or complete module. Type 4 components can be tested for Type 1, Type 2 or Type 3 applications. </li></ul></ul>X X
  8. 8. UL 1449-3 & 2008 NEC Art 285 SPD Types: Types 1, 2, 3 & 4 Based on Location within electrical distribution system Trans Meter Svc. Disc. Panel Type 1 10m (30feet) Type 2 Type 3 OCP built in to SPD, more rigorous testing
  9. 9. UL 1449 THIRD Edition Performance Test Format Changed New Testing uses Six (6) Times More Energy Old – 6kV / 500A Suppressed Voltage Ratings (SVR) New – 6kV / 3,000A Voltage Protection Ratings (VPR) 500A 3000A <ul><li>As surge amplitude goes up, </li></ul><ul><li>clamping voltage goes up too </li></ul><ul><li>Specs become obsolete </li></ul><ul><li>Need new VPRs in specs </li></ul>
  10. 10. New Clamping Voltages
  11. 11. UL 1449 THIRD Edition I nominal Testing – In - (Nominal Discharge Current) - New Concept to USA – Originated from IEC 61643 - Duty Cycle Testing - 15 8x20  s surges through every mode of three samples used for VPR testing Type 1 – 20kA or 10kA Type 2 – 20kA, 10kA, 5kA or 3kA Type 3 – 3kA Type 4 – Based on intended usage as Types 1, 2 or 3 UL 96A Master Label requires 20kA In from Type 1 or Type 2 SPD
  12. 12. What to look for in a spec….
  13. 13. … continued
  14. 14. APT offers a full breadth of Type 1 and Type 2 SPD’s. Our Type 1 SPD’s use Large Block 50kA MOV’s that have Thermal Protection and are very reliable and robust. Each Series offers protection which is ideal for remote locations and extreme duty applications where downtime is unacceptable, to models ideal for downstream applications. Our units offer protection from 50kA per phase up to 1000kA per phase. Advanced Protection Technologies
  15. 15. SPD Products from Advanced Protection Technologies <ul><li>Low UL 1449 Third Edition VPRs – Voltage Protection Ratings </li></ul><ul><li>SCCR tested to 200kA and service entrance (C High - C3) rated </li></ul><ul><li>“ Always On” diagnostics with audible alarm that continuously monitor SPD unit status </li></ul><ul><li>AC tracking filter with EMI/RFI Filtering up to -50db from 10kHZ to 100MHZ </li></ul><ul><li>10 Year Warranty* </li></ul><ul><li>(Also available in 20 & 30) </li></ul><ul><li>*Does NOT include SPDee or DIN Rail* </li></ul>Unitized Replaceable Module DIN Rail
  16. 16. XB Series Dependable protection at Service Entrance, Distribution Panels and Downstream <ul><li>Redundant Suppression Modules (2 per phase). </li></ul><ul><li>XBS: Standard modes (L-N, L-G, L-L, N-G) </li></ul><ul><li>XBL: Includes direct L-L protection for 10 mode </li></ul><ul><li>Wye Systems (L-N, L-G, L-L, N-G) </li></ul><ul><li>Surge current ratings of 400kA, 500kA, 600kA, </li></ul><ul><li>1000kA per Phase (XBL 10 Mode: 600 or 900kA) </li></ul><ul><li>Internal Disconnect Switch: Standard </li></ul><ul><li>All Overcurrent Protection included inside SPD </li></ul><ul><li>Options: Dry Contacts, Surge Counter </li></ul><ul><li>Standard Enclosure: NEMA 1, 12, 3R, 4 </li></ul><ul><li>Optional Enclosures: 4S, 4X, FM </li></ul><ul><li>UL Recognized Case-less model for switchboard </li></ul><ul><li>and switchgear mounting (See XW Series) </li></ul><ul><li>200kA & 100kA SCCRs </li></ul><ul><li>UL & NEC Type 1 SPD </li></ul><ul><li>20kA In Rating (Nominal </li></ul><ul><li>Discharge Current) </li></ul><ul><li>EMI/RFI Noise Filtering </li></ul>
  17. 17. XA Series For Critical Loads at Service Entrance Switchboards/Switchgear <ul><li>XAS: Standard modes (L-N, L-G, L-L, N-G) </li></ul><ul><li>XAL: Includes direct L-L protection for 10 mode </li></ul><ul><li>Wye Systems (L-N, L-G, L-L, N-G) </li></ul><ul><li>Surge current ratings: 100kA, 150kA, 200kA, </li></ul><ul><li>250kA, 300kA, 400kA, 500kA per Phase </li></ul><ul><li>Internal Disconnect Switch: Optional </li></ul><ul><li>All Overcurrent Protection included inside SPD </li></ul><ul><li>Options: Dry Contacts, Surge Counter </li></ul><ul><li>Standard Enclosure: NEMA 1, 12, 3R, 4 </li></ul><ul><li>Optional Enclosures: 4S, 4X, FM </li></ul><ul><li>UL Recognized Case-less model for switchboard </li></ul><ul><li>and switchgear mounting (See XR & W Series) </li></ul><ul><li>200kA & 100kA SCCRs </li></ul><ul><li>UL & NEC Type 1 SPD </li></ul><ul><li>20kA In Rating (Nominal </li></ul><ul><li>Discharge Current ) (Most </li></ul><ul><li>models) </li></ul><ul><li>EMI/RFI Noise Filtering </li></ul>
  18. 18. TE/XGA Series Full Featured workhorse for service entrance, distribution and branch panels. <ul><li>All modes: L-N, L-G, L-L, N-G </li></ul><ul><li>Surge current ratings: 160kA, 240kA per Phase </li></ul><ul><li>Optional Hybrid MOV/SAD: </li></ul><ul><li>90kA, 130kA, 170kA per Phase </li></ul><ul><li>All Overcurrent Protection included inside SPD </li></ul><ul><li>Options: Dry Contacts, Surge Counter </li></ul><ul><li>Standard Enclosure: NEMA 1, 12, 3R, 4 </li></ul><ul><li>Optional Enclosures: 4S, 4X, FM </li></ul><ul><li>UL Recognized Case-less model for switchboard </li></ul><ul><li>and switchgear mounting (See XTE/XGA Series) </li></ul><ul><li>200kA SCCR </li></ul><ul><li>UL & NEC Type 2 SPD </li></ul><ul><li>TranSafe  Redundant </li></ul><ul><li>Circuitry </li></ul><ul><li>Large Block 40kA MOVs </li></ul><ul><li>EMI/RFI Noise Filtering </li></ul>
  19. 19. TE/HP TE/HP Series Dependable protection at service entrance, distribution panels and downstream. <ul><li>All modes: L-N, L-G, L-L, N-G </li></ul><ul><li>Surge current ratings: 120kA, 160kA per Phase </li></ul><ul><li>Phase Replaceable Modules </li></ul><ul><li>Phase Replaceable Fuses </li></ul><ul><li>All Overcurrent Protection included inside SPD </li></ul><ul><li>Options: Dry Contacts, Surge Counter </li></ul><ul><li>Standard Enclosure: NEMA 1, 12, 3R, 4 </li></ul><ul><li>Optional Enclosures: 4S, 4X, FM </li></ul><ul><li>UL Recognized Case-less model for switchboard </li></ul><ul><li>and switchgear mounting (See XTE/HP Series) </li></ul><ul><li>200kA SCCR </li></ul><ul><li>UL & NEC Type 2 SPD </li></ul><ul><li>Large Block 40kA MOVs </li></ul><ul><li>EMI/RFI Noise Filtering </li></ul>
  20. 20. TE/HPS TE/HPS Series Budget conscious protection for service entrance, distribution and branch panels. <ul><li>All modes: L-N, L-G, L-L, N-G </li></ul><ul><li>Surge current ratings: 80kA, 120kA & </li></ul><ul><li>160kA per Phase </li></ul><ul><li>Phase Replaceable Modules </li></ul><ul><li>Phase Replaceable Fuses </li></ul><ul><li>All Overcurrent Protection included inside SPD </li></ul><ul><li>Options: Dry Contacts </li></ul><ul><li>Standard Enclosure: NEMA 1, 12, 3R, 4 </li></ul><ul><li>Optional Enclosures: 4S, 4X, FM </li></ul><ul><li>UL Recognized Case-less model for switchboard </li></ul><ul><li>and switchgear mounting (See XTE/HPS Series) </li></ul><ul><li>200kA SCCR </li></ul><ul><li>UL & NEC Type 2 SPD </li></ul><ul><li>Large Block 40kA MOVs </li></ul><ul><li>EMI/RFI Noise Filtering </li></ul>
  21. 21. XDS Series For Distribution and Branch Applications <ul><li>All modes: L-N, L-G, L-L, N-G </li></ul><ul><li>Surge Current Ratings: 100kA, </li></ul><ul><li>150kA, 200kA Per Phase </li></ul><ul><li>Enclosure: NEMA 4X Standard </li></ul><ul><li>Options: </li></ul><ul><ul><li>Dry Contact & Audible Alarm </li></ul></ul><ul><ul><li>Delete Noise Filtering </li></ul></ul><ul><ul><li>FM – Flushmount </li></ul></ul><ul><li>UL & NEC Type 1 SPD </li></ul><ul><li>20kA In Rating (Nominal </li></ul><ul><li>Discharge Current) (Most </li></ul><ul><li>Models) </li></ul><ul><li>EMI/RFI Noise Filtering </li></ul>
  22. 22. XCS Series For Branch Panel Applications <ul><li>All modes: L-N, L-G, L-L, N-G </li></ul><ul><li>Surge Current Rating: 100kA per </li></ul><ul><li>phase </li></ul><ul><li>Enclosure: NEMA 4X Standard </li></ul><ul><li>Options: </li></ul><ul><ul><li>Dry Contact & Audible Alarm </li></ul></ul><ul><ul><li>FM – Flushmount </li></ul></ul><ul><li>UL & NEC Type 1 SPD </li></ul><ul><li>20kA In Rating (Nominal </li></ul><ul><li>Discharge Current) (Most </li></ul><ul><li>Models) </li></ul>
  23. 23. SPD EE Series <ul><li>Versatile – Numerous voltage configurations: </li></ul><ul><li>1Pole, 2 Pole (Split Phase), 3 Phase </li></ul><ul><li>50kA or 100kA (Split-Phase) Per Phase </li></ul><ul><li>Always On Green LED </li></ul><ul><li>Options </li></ul><ul><ul><li>N-G protection </li></ul></ul><ul><ul><li>Dry Contact & Audible Alarm </li></ul></ul><ul><ul><li>Other configurations available for OEM – </li></ul></ul><ul><ul><li>Call </li></ul></ul><ul><li>Tri-Mount Installation </li></ul><ul><ul><li>Nipple </li></ul></ul><ul><ul><li>Din-Rail </li></ul></ul><ul><ul><li>Backplane </li></ul></ul><ul><li>UL & NEC Type 1 SPD </li></ul><ul><li>Replaces Secondary Arrestors </li></ul><ul><li>Meets UL 96A Lightning Protection </li></ul><ul><li>Master Label @ 20kA In </li></ul><ul><li>20kA In Rating (Nominal Discharge </li></ul><ul><li>Current) (Most models) </li></ul>
  24. 24. APT DIN Rail Surge Protection Devices <ul><li>APT AC DIN Rail mounted SPDs are designed for downstream load protection. They are parallel connected devices which utilize large block MOVs, housed in UL 94V-0 thermoplastic enclosures. Each device includes internal thermal disconnects and visual failure mode status indicators with optional relay contacts. </li></ul><ul><li>These devices are intended for use in IEC Class II, UL 1449 Type 2, Type 4, and IEEE Category C, B & A load applications. . </li></ul><ul><li>APT Low Voltage DIN Rail SPDs utilize a hybrid mix of Tranzorbs, inductors, gas tubes, and resistors for complete low-voltage/data protection. </li></ul><ul><li>These products are intended for use on a wide range of low-voltage applications, protect up to 4 wires in a single enclosure, adhere to UL 497B and are IEC / CE compliant. </li></ul><ul><li>Offered in a full range of AC service voltages; </li></ul><ul><ul><li>120V Single Phase 120/208V 3-Phase Wye </li></ul></ul><ul><ul><li>120/240V Split Phase 480V 3-Phase Delta </li></ul></ul><ul><ul><li>230V Single Phase 277/480V 3-Phase Wye </li></ul></ul><ul><ul><li>240V 3-Phase Delta 347/600V 3-Phase Wye </li></ul></ul><ul><ul><li>277V Single Phase </li></ul></ul><ul><li>The following DC low voltage are also available: </li></ul><ul><ul><li>5V / 4-wire 12V / 4-wire </li></ul></ul><ul><ul><li>24V / 4-wire 48V / 4-wire </li></ul></ul><ul><ul><li>60V / 4-wire </li></ul></ul>
  25. 25. Qualifying things to know: <ul><li>System Voltage </li></ul><ul><li>Panel Information </li></ul><ul><li>Panel Amperage </li></ul>?
  26. 26. Qualifying things to know: <ul><li>System Voltage </li></ul><ul><li>Panel Information </li></ul><ul><li>Panel Amperage </li></ul><ul><li>Available Breaker </li></ul><ul><li>SPD Options </li></ul>?
  27. 27. APT SPD - Ordering
  28. 28. Verifying at www.UL.com <ul><li>Click </li></ul><ul><li>Certifications </li></ul>Category Code #’s: XUHT for TVSS (<Oct 09) OWHX for Arrestors (<Oct 09) VZCA for SPDs
  29. 29. APT – the answer to all your surge protection needs!!! <ul><li>Some of our services include: </li></ul><ul><ul><li>Competitor Product Comparison – Competitively priced in the current market </li></ul></ul><ul><ul><li>Proper Product Selection – Based on specification/engineer requirements </li></ul></ul><ul><ul><li>Specification Interpretation with Engineering Assistance </li></ul></ul><ul><ul><li>Consulting Engineering History – Extensive database, compiled over the last 25 years, we know engineers likes/dislikes </li></ul></ul><ul><ul><li>Never sell direct to contractors – You deal direct with the factory </li></ul></ul><ul><ul><li>Submittals – E-mailed in minutes </li></ul></ul><ul><ul><li>Experience in the Industrial Market - New Din Rail Products </li></ul></ul><ul><ul><li>Live Interactive Internet Based Training – Seminars also hosted here at our factory </li></ul></ul><ul><ul><li>Stocking Program – No minimums or penalties </li></ul></ul><ul><ul><li>Troubleshooting, Returns </li></ul></ul>APT: 800.237.4567 www.apttvss.com, www.aptspd.com
  30. 30. Thank you for your time!

×