September 2022 Food Technology Magazine Article.
With 30 years of experience across the food science and packaging spectrum, Dr Claire Sand through her company, Packaging Technology & Research, offers clients solutions using Strategy, Technology, Consulting and Coaching.
Want to know more about how this article affect your business? Reach out to Dr Sand on Linked In - https://www.linkedin.com/in/clairekoelschsand
Want to keep learning from Dr. Sand? View more of her presentations and articles at https://www.packagingtechnologyandresearch.com/expertise.html
Dr. Claire Sand | Owner, Packaging Technology & Research, LLC; Adjunct Professor, Michigan State University; Columnist for Food Technology Magazine
http://www.packagingtechnologyandresearch.com/
VIP Model Call Girls Wadgaon Sheri ( Pune ) Call ON 8005736733 Starting From ...
September 2022 Top Packaging Challenges-Getting It and Making It Count.pptx
1. Top Packaging
Challenges:
Getting It and
Making It
Count
September 2022
Connect with me at 612-807-5341 or
claire@packagingtechnologyandresearch.com
Dr Claire
Sand’s
article in
IFT’s Food
Technology
Magazine
2.
3. risks to be more wholly determined.
Another way to manage and assess
risk isto perform stress tests within
the entire packaging supply chain.
This defines nodes in the supply
chain that are at risk. For exam-
pie, the loss of an adhesive source
may prevent required lamination
processes and result in substitu
tion to meet timelines. Planning
for this substitution reduces risk.
Increasingly, brands need to
switch packaging materials and
formats due to sourcing issues.
Predicting shelflife and measuring
shelflife in accelerated conditions,
coupled with experiential knowl
edge-benchmarking competitors'
current product barriers, tempera
ture, and humidity conditions and
additional shelflife or product dif
ferences-allows for more rapid
switching. In addition, package
parameters and a solid knowledge
of the mode of product deteriora
tion need to be known. Packaging
barriers to water and oxygen are
needed to defend against the four
modes of deterioration-water
vapor loss/gain, lipid oxidation,
microbial growth, and brown
ing-in addition to flavor loss.
Package fraud also is a result of
packaging procurement challenges.
As with food fraud, econom-
ics drive package fraud, which
threatens a food package's pri
mary function: to protect food.
Fraudulent packaging can provide
different migration rates, use of
unapproved chemicals, and pro
cessing aids, all of which can affect
shelflife and seal integrity. Package
fraud can be deterred by develop
ing a chain of custody for packaging
components, for which the eco
nomics driving packaging fraud
are high. For example, the substitu
tion of virgin material for recycled
or bioderived polymers happens
when their prices exceed virgin
polymers. Extra effort in con
firming this supply minimizes the
risk of package fraud occurring.
F
o
rb
r
a
n
d
s
a
n
dretailers
t
om
e
e
tr
o
o
d
w
a
s
t
e
reduction
targets,
c
o
n
s
u
m
e
r
deriv
edr
o
o
d
wa
s
t
em
u
s
t
b
ea
d
d
r
e
s
s
e
d
W
i
l
h
p
a
c
k
a
g
i
n
g
.
Known or unknown (fraud
ulent) switching of package
materials also exposes another
area-that of chemicals of con
cern (COCs). Chemicals such as
inks and coatings on paperboard
can migrate into food, hampering
recycling, reuse, and compost ing
efforts. More than 10,000
chemicals are approved for direct
food contact based on a defined
condition of use. So, a pack-
age suitable for food contact for
one product type, such as hard
candy, will not be acceptable for
salad dressing. Packaging sup
pliers supply information based
on approved use. It is best prac
tice to verify that migration is not
an issue for each product, espe
cially if the package source is new
and the chain of custody is not
tight. Food-simulating liquids
measure migration when packag
ing is in contact with the food.
Package Development Delays
Prototype and production tooling
for new packaging are experienc
ing longer wait times. However,
product launch deadlines are
often not extended. Instead, cre
ative problem-solving, adopting
refined expertise in developing
package options, and commu
nicating added risks are used
to meet launch timelines.
To meet R&D timelines, one
solution is to employ a nonsequen
tial research and development
process. For example, R&D tri-
als and factory acceptance tests
(FATs) now provide the ability to
assess numerous package options
in a single trial versus allowing
time to refine packaging between
successive trials. This demands
expertise in defining what options
should be trialed versus relying on
a sequence of trial results to fine
tune and define all package options
in a single trial. Managing the risk
of a suboptimal option is criti-
cal. To manage this, a phased-in
approach is used to fine-tune
packaging immediately after less
than-perfect packaging at launch.
Making It Count: Meeting
Consumer Needs
The rising cost of packaging and
the increased cost of food means
that packaging must work harder
to add brand and consumer value
and maintain food safety. Adding
value with a packaging investment
needs to connect in a meaningful
way with consumers and retailers to
drive sales and pay off on the invest
ment. For example, front-of-house
(FOH) packaging that extends the
shelflife of food in a display case
reduces out-of-stocks (OOS), the
economic loss of food waste, and
labor in rotating and checking on
products. In this scenario, a pack
aging solution needs to increase
product shelflife for a meaning-
ful amount of time. This varies by
product and venue. A 20-minute
extension is worthy of additional
packaging investment for hamburg
ers at a QSR but not for a fruit salad
sold in a grocery store. With this
time parameter firmly established by
product type, packaging solutions
that meet this need are developed
and weighed against the econom-
ics of OOS, food waste, and labor.
Likewise, for retailers and
brands, packaging has intense
value if it resonates with con
sumers. The process of price-pack
architecture involves a rational
conjoint analysis to define what
package elements drive consumer
purchase intent. Essentially, the
connection between packaging
investment and consumer needs
is critical. In many cases, pack
aging options are assessed before
evaluating whether the solutions
the options provide have mean
ing to consumers. For example, in
a recent survey, consumers ranked
closure solutions and liked the
flip top closure used by the cate
gory leader best. However, when
78 Food Technology I September 2022
4.
5. • Claire Sand is a Global Packaging Leader with 35+ years of broad
experience in the food and packaging science spectrum in industry -
from basic research to marketing - and in academia - tenured
professor and director.
• Sand's mission is to enable a more sustainable food system with
science and value chain innovations that more sustainably increases
food shelf life and prevents food waste.
• She solves packaging and food industry challenges using a blend of
packaging and food science and value-chain expertise.
• Dr. Sand holds a PhD in Food Science and Nutrition from the
University of Minnesota and MS and BS in Packaging from Michigan
State University.
Questions?
Let’s Connect!
Call 617-807-5341 or email
claire@packagingtechnologyandresearch.com
www.PackagingTechnologyandResearch.com