Your content is probably the most important feature of your website, so it's important to make sure that the text looks good and is easy to read no matter what device type or screen size it's being viewed on. One size does not fit all when it comes to typography, but you can use media queries to adjust type qualities such as size, line height, column width, margins, hyphenation, and even typeface depending on the viewport size. Learn how you can use CSS to apply design rules that will make your typography look better and perform better across devices.
Presented at Snow*Mobile (February 2014), In Control (February 2014), MoDevEast (December 2013) and CSS Dev Conference (October 2013).
2. Covered in these slides:
1. Font Size
2. Line Height (Leading)
3. Line Length (Measure)
(those three things work together to make
text look good and easy to read)
4. Hyphenation
3. Photo credit: Matt Moonlight http://www.flickr.com/photos/matt_moonlight/9173909588/
4. Why Typography?
Websites are about getting information to people, and that’s mostly done through text.
So you need to make sure that your text is as easy to read as possible.
5. Media Queries
A website can have as many media queries as you want. Add a media query where something
needs to change - even if it’s a small thing. Don’t think of responsive websites as being made
up of a few separate designs (one-column, two-column, etc.). Think of responsive websites as a
range of changes across all viewport widths. Typography media queries
don’t need to happen at the same breakpoints as layout changes.
7. <h1>Heading</h1>
<h2>Subheading</h2>
<p>This is a paragraph</p>
It’s important to use the correct elements. For very old browsers/devices that don’t support CSS,
they’ll still be able to display text using browser defaults. This is also important for accessibility.
9. Because typefaces in the same font-size aren’t actually the same size. These are different fonts
in the same size (in pixels). Changing the typeface later will affect your layout.
11. Reference pixels aren’t even the same size on every device. This is 320 pixels viewed
on an iPhone and on a laptop screen, held next to each other. http://m.ew.com
12. Setting Font Size
Two alternatives for font size: ems and rems.You probably know these in the context of converting from
pixels. But it’s also possible (and more responsive) to start with responsive units and not use pixels at all.
13. html { font-size: 100%; }
Base font size for the page - 100% is the browser’s default font size for body text - what the
browser thinks is a good reading size for that device. It’s not the same for every browser, but
currently most computers/devices use 16 pixels. In the future, that may not be the case. By using
responsive units now, you’re making your site more likely to look good on future devices.
14. Starting with the browser default base size makes the site more readable for everybody, even if
the text may seem too large to some users (or to the designer). http://alistapart.com
15. Ems
Ems are linked to the size of type. Originally derived from width of letter M in lead typesetting.
16. 1 em = default
2 em = twice as big
.5 em = half of default
Ems are relative to the font size of the containing element.
17. p { font-size: 1em; }
h3 { font-size: 1.3em; }
h2 { font-size: 1.5em; }
h1 { font-size: 2em; }
p is the base font size - h1 is twice as big
18.
19. p { font-size: 1em; }
li { font-size: 1.5em; }
Nested elements make ems a little bit tricky.
27. h1 { font-size: 32px; font-size: 2rem; }
But not all browsers support it; you need fallback in pixels for IE8 and older.
28. Pixels to ems
Responsive design doesn’t require converting pixels to ems (formulas). Just start with ems.
29. p { font-size: .45833333333em; }
Converting pixels to ems gets you weird numbers, which are difficult
to use, They can also cause problems with rounding by the browser.
30. p { font-size: .46; }
And you don’t need so many decimal points.
31. Line Height (leading)
If lines are too close together/far apart, text is more difficult to read. It’s called leading
because in lead typesetting, they would put pieces of lead between lines to add space.
32. Leading. Photo by Marcin Wichary: http://www.flickr.com/photos/mwichary/2406450779/
33. p { line-height: 1 }
For line-height, use unitless numbers, which are relative to the font size of the element. 1 is default.
34. Default of 1 - lines are close together, it’s hard to focus on one line at a time.
35. line-height: 2 - the lines are too far apart, so it’s difficult and tiring to read
36. line-height: 1.4 - good default to start with, but adjust based on typeface, line width, screen size
37. Small screens need less line height (1.4 on left, 1.3 on right), plus you can fit a little more on screen.
38. p { line-height: 1.3 }
@media screen and (min-width: 30em) {
p { line-height: 1.4 }
}
@media screen and (min-width: 60em) {
p { line-height: 1.5 }
}
Media queries to increase line height as viewport gets wider.
45. Testing Line Length
You should test line length as you’re designing a layout, to stay within the optimal range.
46. 45
75
One easy way to test: count from 45th to 75th character on the first line, and use a span to color it.
47. <p>These stories are true. Although I have
left <span class=”testing”>the strict line
of historical</span> truth in many places,
the animals in this book were all real
characters.</p>
.testing { color: #f00; }
You can easily turn this on an off in your CSS during designing/testing.
48. But this is even easier: after my talk at CSS Dev Conference, Chris Coyier made this
bookmarklet that does the same thing — colors the text red between the 45th-75th characters in
any text element. No need to change your HTML or CSS. http://codepen.io/chriscoyier/pen/atebf
49. Add the bookmarklet to your browser’s bookmarks. Click it, then hover
over the element you want to select — it will be outlined in red...
50. And click to select that element. The 45th-75th characters will be colored red, and will stay
red as you change the size of the browser window (unless you refresh the page.)
51. Margins & Font Size
The main methods to adjust line length are changing the margins and changing the font size.
52. For 320 pixel screen (iPhone), text at base font size fits well in range (very handy!). For smaller
screens, you may need to compromise either font size or line length to make it fit.
53. article {
margin: 15px 3%;
}
Use narrow margins on small screens to not waste space, but don’t have
margins of zero. The example on the previous slide is 3% margin on each side.
59. On our example page, starting out with a good line length.
60. Make your browser window wider until you hit the end of the 45-75
range. This is where you will need to add a media query.
61. Keep a tool like this open in another tab. Once the browser window is at the width where you need a
media query, switch to this tab and easily see that window is now 31 ems. http://mqtest.io/
62. @media screen and (min-width:31em) {
article { width: 70% }
}
On our example, add a media query at 31 ems to increase left/right margin from 3% to 15%.
63. This is the page at a width of slightly less than 31 ems.
64. This is the page at slightly more than 31 ems. The media query has increased the margins.
65. Again expand the browser window to the end of the 45-75 character range. Now we’re at 40 ems.
66. @media screen and (min-width:40em) {
article { font-size: 1.1em }
}
Media query to increase font size, from 1 em up to 1.1 em. Larger fonts will look okay
on larger screens. It’s better to include more media queries with small changes in each
one than to use only a few media queries and make dramatic jumps in font size.
67. This is the page at slightly less than 40 ems.
68. This is the page at slightly more than 40 ems, with a bigger font size. We changed the font size
on the <article> element, so everything inside it is bigger (both paragraph text and heading).
Alternatively, you could just change the <p> font size and leave the heading the same.
69. Make your browser window wider again to the end of 45-75 character range.
70. A media query here changed both the margins and the font size.
71. Since the font size is larger, and we’re on a wider screen, it would
look better if we increased the line height a bit.
72. @media screen and (min-width:55em) {
article { font-size: 1.2em }
p { line-height: 1.5 }
}
Add line height to the media query. Only increase the line height for the <p> (paragraph text), not
everything in <article>, because the heading line height doesn’t need to change.
73. #content { max-width: 63em; }
Eventually the font size is the largest you want to make it, and you want to keep the content
from getting any wider. Use max-width so layout stops expanding for super-wide screens.You can use
max-width on individual columns, or on an element that contains all your content.
74. Real example, Trent Walton’s site. 45-75 characters highlighted. http://trentwalton.com
75. body { font-size: 100%; }
.container {
width: 88%;
margin-left: auto;
margin-right: auto;
max-width: 1260px;
}
Starting at the most narrow width, the container is 88% (6% margin on each side).
The font-isze starts at 100% (base font size for the browser).
76. The site at the most narrow width — the content width is 88%.
77. As we make the browser window wider, the content is still 88% width.
78. @media screen and (min-width: 37.5em) {
.container { width: 85%; }
.article .centered p { width: 80%; }
body { font-size: 112.5%; }
}
There’s a media query at 37.5 em, where the content width
changes to 68% (85% × 80%) and the font size increases.
79. Making the browser window slightly wider, we get content at 68% width and 112.5% font size.
86. @media screen and (min-width: 75em) and
(min-height: 31.25em) {
body {font-size: 150%;}
}
At 75 ems, a media query increases the font size, but only if screen is tall enough (so not for
wide laptop screens where the vertical space is taken up with lots of browser toolbars)
87. Here we’re up to a font-size of 150%. It looks good on a wide screen.
88. @media screen and (min-width: 106.875em)
and (min-height: 50em) {
body {font-size: 162.5%;}
.container {max-width:1360px;}
}
Using max-width to keep the layout from getting wider.
89. This site uses max-width instead of min-width for media queries, so I’ll show you
starting from widest screen instead of narrowest screen. http://wearyoubelong.com/
90. body { font-size: 100%; }
@media screen and (max-width:800px) {
body { font-size:90%; }
}
@media screen and (max-width:680px) {
body { font-size:80%; }
}
Start with 100% font size, then a media query takes it down to 90% at 800 pixels or
narrower, and 80% at 680 or narrower. (Yes, media queries should be in ems.)
93. As the window gets narrower, we’re down to 90%. The media query
changes the font size on the body element, so all of the text gets smaller.
94. At a width of 680 pixels, the font-size goes down to 80%.
95. At a narrower screen width, even though the font-size is
80%, the heading/intro text takes up whole screen.
96. On iPhone it’s even worse. It wouldn’t be a good idea to make this particular typeface
smaller (it would be hard to read), but you could use a media query to change the
typeface on narrow screens. Also, don’t use all caps for long sections of text like this.
97. Further down the page, the text is 80% of the browser default. It’s pretty small.
I had trouble reading it, and wanted to zoom in on my phone’s screen...
101. The left example has no hyphenation, the right has hyphenation. On left, look at second-to-last line, the
words look too spaced out. Hyphenation is most important on small screens, to maximize use of space.
103. p {
-webkit-hyphens: auto;
-moz-hyphens: auto;
-ms-hyphens: auto;
hyphens: auto;
}
The hyphen property is new, so you need prefixes. Opera and Chrome don’t support
hyphenation at all, but that’s okay. This is an example of progressive enhancement.
Hyphens make the design better for browsers that can support it, but the design is
still perfectly okay for users with browsers that don’t support hyphenation.
104. @media screen and (min-width:30em) {
p {
-webkit-hyphens: none;
-moz-hyphens: none;
-ms-hyphens: none;
hyphens: none;
}
}
Hyphens are especially important for narrow screens, but
you can use a media query to remove hyphens for wider viewports.
105. <html lang=”en-US”>
You have to specify a language (i.e., English). If you leave it out, the browser won’t
hyphenate. If you specify the wrong language, the browser will still add hyphens, but
weird things may happen. Note: you can specify language on elements other than the
<html> element, if you have more than one language on a particular page.
106. Responsive Typography Resources
The Elements of Typographic Style Applied to the Web – Richard Rutter
http://webtypography.net/toc/
Fluid Type – Trent Walton
http://trentwalton.com/2012/06/19/fluid-type/
Responsive Web Typography – Jason Cranford Teague
http://www.jasonspeaking.com/rwt/#/
Web Typography You Should Do Now – Richard Rutter
http://webtypography.net/talks/sxsw2013/
Prototyping Responsive Typography – Viljami Salminen
http://viljamis.com/blog/2013/prototyping-responsive-typography/
Responsive Web Design and Typography – Danny Calderst
http://www.slideshare.net/dannycalders/typography-responsive-web-design