3. DITCH WITCH POWER PIPE ®
®
FLUID MISER II LINED ROD
MODEL PART# PRICE
JT520 369-318.......................$199.00
JT920/921 369-048.......................$244.40
JT922 355-269.......................$244.40
JT1220 401-239.......................$306.80
JT1720 369-056.......................$348.40
JT2020 401-304.......................$348.40
JT2720 369-235.......................$369.20
JT27M1 400-1029.....................$364.00
JT30M1 400-1029.....................$364.00
JT4020 369-221.......................$582.40
JT40M1 369-804.......................$598.00
UNLINED ROD
MODEL PART# PRICE
JT920/921 400-963.......................$199.00
JT922 400-1118.....................$199.00
JT1220 355-1005.....................$249.00
JT1720 400-843.......................$247.00
JT2020 401-339.......................$279.00
JT2720 400-844.......................$315.00
JT27M1 400-1031.....................$315.00
JT30M1 400-1031.....................$315.00
JT4020 400-846.......................$479.00
JT40M1 400-847.......................$499.00
**Prices subject to change without notice**
4. MAINTENANCE TIPS
DRILL ROD IS AN IMPORTANT INVESTMENT IN YOUR
COMPANY. HELPING OUR CUSTOMERS GET THE MOST LIFE
OUT OF EACH ROD IS ALWAYS OUR TOP PRIORITY. TO KEEP
YOU WORKING BOTH EFFICIENTLY AND SAFELY HERE ARE JUST
A FEW TIPS TO HELP YOU MAXIMIZE THE LIFE OF YOUR RODS.
— WHEN PURCHASING A NEW RACK OF PIPE, MAKE SURE THE SAVER SUB IS LIKE NEW TO
PREVENT DAMAGE TO THE NEW THREADS. A SAVER SUB THAT HAS WORN THREADS CAN
DAMAGE THE NEW DRILL ROAD THREADS EASILY.
— BREAK-IN THE PIPE THREADS ON THE FIRST BORE. THIS CONSISTS OF LUBING THE
THREADS. MAKING UP THE JOINT TO FULL TORQUE, BREAKING THE JOINT AND
REAPPLYING MORE LUBE. REPEAT THIS PROCESS THREE TIMES. THIS WILL ENSURE THAT
THE THREADS ARE BURNISHED AND WILL PREVENT GALLING AND SEIZING.
— MAKE SURE TO MAINTAIN THE ALIGNMENT OF THE PIPE IN THE GROUND AND THE PIPE
IN THE RIG. THIS PREVENTS SIDE LOADING THE THREADS AND UNNECESSARY WEAR AND
POSSIBLE CROSS THREADING. KEEPING THE RIG STAKED DOWN FROM MOVING IS
IMPORTANT.
— WHEN MAKING UP THE THREADS, USE SLOW ROTATION TO REDUCE HEAT AND PREVENT
OVER RUNNING THE THREAD SHOULDERS.
— ALWAYS MAKE UP THE JOINTS TO FULL TORQUE. HAVING GOOD VICE JAW INSERTS IS A
MUST.
— DON’T LET THE DISTANCE FROM THE RIG TO THE ENTRY HOLE GET TOO FAR. LACK OF
ENTRY HOLE SUPPORT WILL MAKE IT EASY TO BUCKLE THE PIPE WHEN THRUSTING TO
STEER.
— KEEP THE INITIAL ENTRY ANGLE AS LOW AS POSSIBLE AND SMOOTHLY TRANSITION TO
THE DESIRED DEPTH.
— NEVER EXCEED THE RECOMMENDED MAXIMUM BEND RADIUS. MANY OPERATORS TEND
TO LEVEL OUT THE BORE TOO QUICKLY FROM THE ENTRY HOLE OR SURFACE TOO QUICKLY
WHEN EXITING. THIS CAUSES EXTRA BENDING STRESS ON THE PIPE AND SHORTENS THE
LIFE SUBSTANTIALLY.
— ROTATE THE PIPE REGULARLY. THIS MEANS MOVING THE LEAD PIPE TO THE END OF THE
STRING CONTINUALLY. THIS PREVENTS THE FIRST FEW PIPES FROM SEEING ALL OF THE
FOOTAGE ON PILOT AND PULL BACK EVERY TIME.
7. Beacon Housings
MODEL PART # PRICE
JT520 SINGLE NOZZLE 369-161 ................................................$ 803.92
107-277 BIT BOLT..............................$ 92
105-521 ROLL PIN.............................$ .30
JT920/921/922
86B BEACON 300-1232 ................................................$1,037.92
107-277 BIT BOLT..............................$ .92
107-896 DOOR BOLT........................$ 6.45
JT1220 300-1232 ................................................$1,037.92
107-277 BIT BOLT..............................$ 92
107-896 DOOR BOLT........................$ 6.45
JT1720/JT2020 400-1108 ................................................$1,090.96
107-277 BIT BOLT..............................$ 92
107-896 DOOR BOLT........................$ 6.45
JT2720 6 BOLT HOUSING 368-999 ................................................$2,009.00
106-681 BIT BOLT..............................$ 3.22
106-544 DOOR BOLT........................$ .92
JT27M1/JT30M1 400-1065 ................................................$1,971.84
106-681 BIT BOLT..............................$ 3.22
106-739 DOOR BOLT........................$ 5.20
JT4020 368-999 ................................................$2,009.00
106-681 BIT BOLT..............................$ 3.22
106-544 DOOR BOLT........................$ .92
JT40M1 400-964 ................................................$3,374.80
107-284 BIT BOLT..............................$ 3.02
106-544 DOOR BOLT........................$ .92
BEACON BUDDIES
JT520/JT1720 159-461 .............................$14.56
JT2720/JT40M1 159-473 .............................$15.60
NOZZLES
NOZZLE .10 149-201 .............................$23.61
NOZZLE .15 149-202 .............................$23.61
NOZZLE .20 149-203 .............................$23.61
NOZZLE .25 149-204 .............................$23.61
**Prices subject to change without notice**
8. DITCH WITCH
ELECTRONICS
MODEL PRICE
88B (WITH CASE) ..............................................................$1,701.20
86B (WITH CASE) ..............................................................$2,029.08
86BH (WITH CASE) ...........................................................$3,069.08
86BG (CASE & LEVEL) .....................................................$3,050.00
WE REBUILD YOUR BEACONS IN HOUSE;
WHILE YOU WAIT.
OTHER BEACON OPTIONS ARE AVAILABLE THROUGH
SPECIAL ORDER. PLEASE CONTACT YOUR LOCAL DITCH
WITCH DEALER TO FIND OUT MORE.
**Prices subject to change without notice**
9. BITS
TUFF BIT STEEP TAPER
MODEL
JT520 369-727…………………………………………...............................369-315
$161.20 $64.27
JT920/921/922 369-731 4-1/2”…………………………………….............................368-895 4-1/2”
$209.04 $107.12
JT1220 369-731 4-1/2”…………………………………….............................368-895 4-1/2”
$209.04 $107.12
JT1720 369-731 4-1/2”……………………………………............................368-895 4-1/2”
$209.04 $107.12
JT2020 369-731 4-1/2”…………………………………….............................368-895 4-1/2”
$209.04 $107.12
JT2720 369-731 4-1/2”…………………………………….............................368-895 4-1/2”
$209.04 $107.12
JT27M1 369-735 5”………………………………………..............................369-466 5”
$252.72 $156.00
JT30M1 369-735 5”………………………………………..............................369-466 5”
$252.72 $156.00
JT4020 369-739 5”………………………………………..............................369-486 5”
$257.92 $214.24
TUFF BIT : Ultimate long-wearing bit for all soil STEEP TAPER BIT : Designed with a
conditions, including hard, compacted soils or pointed, triangle-shaped nose, the steep taper
soft, sedimentary rock. Tuff bit segments along bit can be used in highly compacted soil, light
the leading edge have the strength and stability rock and cobble.
to handle the pounding and vibration of drilling
in rock. The barracuda material down the sides
reduces wear on the nose of the housing.
**Prices subject to change without notice**
10. BITS (CONT.)
STEEP TAPER TUFF
MODEL
JT520 N/A
BIT BOLTS
JT920/921/922 400-120 4-1/2”
$460.72 JT520 - JT2720
PART# PRICE
JT1220 400-120 4-1/2”
107-277...........$ .92 EA
$460.72
JT1720 400-120 4-1/2”
JT27M1 - JT40M1
$460.72
JT2020 400-120 4-1/2” 106-681..........$ 3.22 EA
$460.72
JT2720 400-120 4-1/2”
$460.72
JT27M1 400-122 4”
$581.36
JT30M1 400-122 4”
$581.36
STEEP TAPER TUFF BIT : Designed for hard, compacted
soils and soft, sedimentary rock, the steep taper tuff bit
features a pointed, triangle shaped nose and tuff bit
segments along the leading edge that have the strength
and stability to withstand the pounding and vibration of
drilling in rock.
**Prices subject to change without notice**
11. BITS (CONT.)
TORNADO BARRACUDA
MODEL
JT520 N/A......…………………………………………...369-171 2-1/2”
$64.27
JT920/921/922 400-1039 4”....…………………………………….368-892 4-1/2”
$202.80 $115.44
JT1220 400-1039 4”....…………………………………….368-892 4-1/2”
$202.80 $115.44
JT1720 400-1039 4”....…………………………………….368-892 4-1/2”
$202.80 $115.44
JT2020 400-1039 4”....…………………………………….368-892 4-1/2”
$202.80 $115.44
JT2720 400-1057 4”....…………………………………….368-892 4-1/2”
$213.20 $115.44
JT27M1 400-1061 5” N/A
$238.16
JT30M1 400-1061 5” N/A
$238.16
JT4020 400-1127 5”……………………………………….369-500 5”
$514.80 $214.24
JT40M1 400-1127 5”……………………………………….369-500 5”
$514.80 $214.24
TORNADO BIT : Long-lasting, all purpose bit BARRACUDA BIT : This bit can be used in
designed for use in a variety of soils, including most soil conditions, especially running sand
sandstone, chunk rock, and hard soils. and sandy loam soils.
**Prices subject to change without notice**
12. SOIL CONDITION CHART
Key =Best =Better =Good
THIS CHART HELPS YOU CHOOSE THE IDEAL DRILLING BIT FOR A PARTICULAR TYPE OF SOIL.
Bit Sandy Soft Medium Hard Chunk Soft Hard
Type Soil Soil Soil Soil Rock Rock Rock
Sand Bit
Durabit
Tuff Bit
Barracuda Bit
Hard Surface Bit
Tornado Bit
Steep Taper Bit
Steep Taper Tuff Bit
Glacier Bit
Rhino Rock Bit
Cobble Bit
Talon Bit
Soft Formation Bit
Tri-Cone Bit
THIS CHART IS MEANT AS A GUIDELINE ONLY. SEE YOUR LOCAL DITCH WITCH DEALER FOR
RECOMMENDATIONS IN YOUR AREA.
13. AGGRESSIVE TALON BIT
A MULTI-USE BIT DESIGNED FOR A VARITY OF SOIL CONDITIONS; INCLUDING
SANDSTONE, SHALE, AND CHUNK ROCK. ORIGINALLY FEATURING A TAPERED HEAD
BEACON HOUSING, THE NEW AND IMPROVED AGGRESSIVE TALON BIT HAS A
THREAD-ON SHANK THAT PROVIDES GREATER RELIABILITY AND DURABILITY IN TOUGH
CONDITIONS. IN FRONT OF THE TOOL ARE FOUR REPLACEABLE CARBIDE-TIPPED
CUTTING TEETH. THE ANGLE OF THE CUTTING TEETH ENABLES THE AGGRESSIVE TALON
BIT TO MORE EFFECTIVELY CARVE INTO ROCK. THE CARBIDE BUTTON IN ITS
ABRASION-RESISTANT STEEL-BIT BODY HELPS REDUCE WEAR WHEN WORKING IN TOUGH
CONDITIONS. IT IS TIMES REFERRED TO AS AN “EAGLE” OR “HAWK” BIT. DON’T BE
FOOLED BY OTHER PRODUCTS. THE DITCH WITCH AGGRESSIVE TALON BIT IS THE LONG
LASTING, DITCH WITCH O.E.M. TOOL YOU NEED.
MADE BY DITCH WITCH, FOR DITCH WITCH.
MODEL
JT520 N/A
JT920/921/922.........................................400-1084 4”
$3,666.00
JT1220.....................................................400-1084 4”
$3,666.00
JT1720.....................................................400-1104 4-1/2”
$3,867.76
JT2020.....................................................400-1104 4-1/2”
$3,867.76
JT2720.....................................................400-1109 5-1/2”
$4,331.60
JT27M1..................................................400-1109 5-1/2”
$4,331.60
JT30M1..................................................400-1109 5-1/2”
$4,331.60
JT4020....................................................400-1113 6”
$4,820.40
JT40M1..................................................400-1113 6”
$4,820.40
**Prices subject to change without notice**
14. REAMERS
BEAVERTAIL
The Beavertail Backreamer's low-weight design, low-resistance
profile, and efficient fluid handling requires far less horsepower
for rotation in a variety of soil conditions.
Nozzles sold separately. All beavertail reamers take 13 nozzles that are 7/8”.
Please see Reamer Nozzles page.
SIZE PART # PRICE
4-1/2” 369-198..............................$747.76
6” 368-536..............................$851.76
JT520 8” 368-539..............................$966.16
10” 368-542..............................$1,066.00
12” 368-545..............................$1,174.16
14” 368-548..............................$1,278.16 2.00” Shaft
SIZE PART # PRICE
JT920
JT921 6” 369-201..............................$982.80
JT922 8” 368-419..............................$1,086.80
JT1220 10” 368-424..............................$1,193.92
JT1720 12” 368-621..............................$1,253.20
JT2020 14” 368-427..............................$1,515.28
JT2720 18” 368-430..............................$1,943.76
2.75” Shaft
SIZE PART # PRICE
JT27M1 8” 400-323..............................$1,194.96
10” 400-324..............................$1,298.96
JT3020
12” 400-325..............................$1,361.36
JT4020
14” 400-326..............................$1,631.76
JT40M1 16” 400-327..............................$1,839.76
18” 400-328..............................$2,058.16 3.50” Shaft
UNIVERSAL QUICK WRENCH SET 368-761………………………….$910.00
**Prices subject to change without notice**
15. REAMERS (CONT.)
COMPACT FLUTED
Featuring a built-in swivel, the compact fluted backreamer is used for cutting and
compacting the hole in medium to tough soil conditions. Nozzles over the entire
body provide good mixing action and efficient lubrication in the soil.
Nozzles sold separately. Nozzles required are 7/16”.
Please see Reamer Nozzle page.
SIZE PART # PRICE
JT520 4-1/2” 357-696 $1,081.60
6 Nozzles
JT920 4-1/2” 401-355..................$1,066.00
JT921
JT922 6-1/2” 368-942..................$1,174.16
JT1220
JT1720 8-1/2” 368-944..................$1,466.40 9 Nozzles
JT2020
JT2720 10-1/2” 368-946..................$2,174.64
CAST FLUTED
Designed for cutting and compacting the hole in medium to tough soil conditions,
the cast fluted backreamer is manufactured to be strong, durable, lighter in weight
and more economical than solid steel. Features a built-in swivel and carbide-faced
shark tooth cutters for maximum productivity and durability. Fluid ports are
positioned for efficient fluid mixing and for lubrication of the hole, tool and the
product being installed.
No nozzles required.
JT27M1
SIZE PART # PRICE
JT3020
JT4020
8” 400-269..................$1,446.64
10” 400-270..................$2,356.64
J40M1
3.50” Shaft
UNIVERSAL QUICK WRENCH SET 368-761………………………….$910.00
**Prices subject to change without notice**
16. REAMERS (CONT.)
KODIAK COBBLE
Designed for extreme soil conditions such as rock, chunk rock, and cobble
where a paddle-type reamer could not survive, the Kodiak Cobble
Backreamer's spiraling flutes provide a cutting surface that allows cuttings
and fluid to flow behind the reamer and over the product.
No nozzles required.
SIZE PART # PRICE
JT920
10” 369-661.................$1,846.00
JT921
JT922 12” 369-662.................$2,184.00
JT1220
JT1720
16” 369-663.................$2,964.00
JT2020 20” 369-664.................$3,320.72
JT2720 3.00” Shaft
SIZE PART # PRICE
JT27M1 10” 400-330.................$1,840.80
JT3020 12” 400-331.................$2,137.20
JT4020 14” 400-332.................$2,567.76
JT40M1 18” 400-334.................$3,094.00
3.50” Shaft
UNIVERSAL QUICK WRENCH SET 368-761………………………….$910.00
**Prices subject to change without notice**
17. REAMERS (CONT.)
WATER WING
The Water Wing is an innovative and durable three wing cutter design.
Fluid is delivered on each wing at the cutting edge, which keeps the
cuttings flowing out instead of balling up on the reamer.
No nozzles required
Water Wing Backreamer(2.75” Shaft)
MODELS DESCRIPTION PART NO. PRICE
JT920/JT920L...... 12.0” WATER WING BACKREAMER..... 369-782................. $1,303.59
JT1720/JT2720
JT920/JT920L...... 16.0” WATER WING BACKREAMER..... 369-783..................$1,606.75
JT1720/JT2720
JT920/JT920L...... 20.0” WATER WING BACKREAMER..... 369-784..................$2,158.50
JT1720/JT2720
JT920/JT920L...... 24.0” WATER WING BACKREAMER..... 369-785..................$2,522.29
JT1720/JT2720
Water Wing Backreamer(4.00” Shaft)
MODELS DESCRIPTION PART NO. PRICE
JT4020/JT7020..... 12.0” WATER WING BACKREAMER.... 369-236................. $1,424.85
JT4020/JT7020..... 16.0” WATER WING BACKREAMER.... 369-237................. $1,728.01
JT4020/JT7020..... 20.0” WATER WING BACKREAMER.... 369-238................. $2,401.03
JT4020/JT7020..... 24.0” WATER WING BACKREAMER.... 369-239................. $2,764.82
JT4020/JT7020..... 28.0” WATER WING BACKREAMER.... 369-240................. $2,683.20
UNIVERSAL QUICK WRENCH SET 368-761………………………….$910.00
**Prices subject to change without notice**
18. REAMERS (CONT.)
3-WINGED ROCK
Designed for low torque pressures, excellent fluid mixing and flow, the
Three-Winged Rock Backreamer gives you the ability to backream in more extreme
soil conditions such as hard compacted soils or sandstone and limestone.
No nozzles required.
3-Winged Backreamer(2.75” Shaft)
MODELS DESCRIPTION PART NO. PRICE
JT920/JT920L...... 8.0” 3-WINGED ROCK ............................369-587................. $1,253.20
JT1720/JT2720
JT920/JT920L...... 10.0” 3-WINGED ROCK........................... 369-588..................$1,361.36
JT1720/JT2720
JT920/JT920L...... 12.0” 3-WINGED ROCK............................369-589.................$1,475.76
JT1720/JT2720
JT920/JT920L...... 14.0” 3-WINGED ROCK............................369-590.................$1,579.76
JT1720/JT2720
JT920/JT920L...... 18.0” 3-WINGED ROCK............................369-591..................$1,898.00
JT1720/JT2720
JT920/JT920L...... 22.0” 3-WINGED ROCK............................369-592..................$2,484.56
JT1720/JT2720
JT920/JT920L...... 26.0” 3-WINGED ROCK............................369-593..................$2,907.84
JT1720/JT2720
Water Wing Backreamer(4.00” Shaft)
MODELS DESCRIPTION PART NO. PRICE
JT4020/JT7020..... 12.0” 3-WINGED ROCK.............................369-548................. $1,731.60
JT4020/JT7020..... 14.0” 3-WINGED ROCK.............................369-549................. $1,835.60
JT4020/JT7020..... 16.0” 3-WINGED ROCK........ .....................369-550.................$2,054.00
JT4020/JT7020..... 22.0” 3-WINGED ROCK.............................369-551................. $2,266.16
JT4020/JT7020..... 26.0” 3-WINGED ROCK.............................369-552................. $2,910.96
JT4020/JT7020..... 30.0” 3-WINGED ROCK.............................369-553................. $3,229.20
JT4020/JT7020..... 36.0” 3-WINGED ROCK.............................369-554................. $3,442.40
UNIVERSAL QUICK WRENCH SET 368-761………………………….$910.00
**Prices subject to change without notice**
22. PULLING ACCESSORIES (CONT.)
SLING
LEGS PART# PRICE
3-WAY W/1/2” CABLES......23375-030...............$297.50
4-WAY W/1/2” CABLES......23500-040..............$369.75
SHACKLES
SIZE PART# PRICE
JT520 SPECIAL..............369-709............................$48.26
5/16”...............................516-S................................$ 1.50
3/8”.................................38-S..................................$ 2.05
7/16”...............................716-S................................$ 2.65
1/2”.................................12-S..................................$ 3.07
5/8”.................................58-S..................................$ 5.70
3/4”.................................34-S..................................$ 8.22
7/8”.................................78-S..................................$13.88
SMALLER AND LARGER SIZE SHACKLES ARE AVAILABLE. AS WELL
AS PULLING SLINGS WITH MORE OR LESS LEGS. JUST GIVE US A
CALL FOR PRICING AND AVAILABILITY.
**Prices subject to change without notice**
24. DRILLING PRODUCTS
BORE-GEL **OTHER PRODUCTS ALSO AVAILABLE**
IMPROVE BOREHOLE STABILITY IN POORLY CONSOLIDATED/CEMENTED
SANDS AND GRAVE FORMATIONS. (COLLAPSIBLE SOILS)
$9.98 A BAG $9.65 A BAG/PALLET
NO-SAG
IMPROVE THE CARRYING CAPACITY OF BOTH CLAY AND POLYMER-BASED
DRILLING FLUIDS WITHOUT SIGNIFICANTLY INCREASING THE
VISCOSITY OF THE SLURRY.
$353.00 PER BUCKET
E-Z MUD GOLD
PROMOTES CLAY AND SHALE STABILIZATION TO PREVENT SWELLING
AND/OR DISPERSION. PROMOTES BOREHOLE STABILITY IN WATER
SENSITIVE FORMATIONS. HELPS TO MINIMIZE ROTATIONAL
TORQUE AND CIRCULATION PRESSURE.
$84.75 PER BUCKET
PENETROL
IMPROVE DRILLING EFFICIENCY BY PREFERENTIALLY COATING THE
BOTTOM HOLE ASSEMBLY AND DRILL STRING. CAN MINIMIZE
DIFFERENTIAL STICKING.
$79.50 PER BUCKET
QUICK-TROL LV
PROVIDES FILTRATION CONTROL IN MOST WATER-BASED DRILLING
FLUIDS WITHOUT SUBSTANTIALLY INCREASING VISCOSITY.
$150.40 PER BUCKET
**Prices subject to change without notice**
25. GLOVES, GLASSES, ETC.
Leather Gloves——————- $6.95
Canvas Gloves——————-- $2.00
Hardhat—————————-$17.25
Vest———————————$10.00
Black T-Shirt———————$10.00
Bandit Safety Glasses———-$4.00
Logo Safety Glasses———---$4.00
Nemesis Safety Glasses——--$5.95
**Prices subject to change without notice**
26. SHOVELS
PART# DESCRIPTION PRICE
RAKE LEVELING RAKE $14.75
4-SHOVEL 4” TRENCH SHOVEL $24.50
LH-RD-SHOVEL LONG HANDLE ROUND $14.75
LH-SQ-SHOVEL LONG HANDLE SQUARE $14.75
D-RD-SHOVEL D HANDLE ROUND $14.75
D-SQ-SHOVEL D HANDLE SQUARE $14.75
**Prices subject to change without notice**
27. We Rent!
Need to rent a Vac for potholing, drilling fluid cleanup, or exposing
valve boxes? We have just the equipment and tooling to handle
your vacuum excavation needs!
Need a larger or smaller drill to complete your job, or bid a job out
of your equipment range? You can rent the equipment you need
to expand the range of product you can pull.
The Ditch Witch line of SK Units are the Swiss Army Knife of
Compact Utility equipment with over 100 different attachments
such as trenchers, vibratory plows, power rakes, and augers this
one power unit can handle most of your needs.
The Ditch Witch 410SX is the most outstanding articulated-steer
drop plow in the 30hp class. It can also be equipped with a
trenching attachment that can dig up to 36 inches. This machine
also has a boring motor option for crossing sidewalks and
driveways.
The Ditch Witch XT850 excavator-tool carrier features a unique,
dual-pivot excavator system with a 260° total excavator sweep
along with the ability to handle a large variety of attachments on
the loader side of the machine. To see a full list of attachments
go to www.ditchwitch.com
Contact James Patterson or your Customer Support Representative
for rental rates and availability.
PH:(517)546-9848 or Toll Free:(877)481-9931
www.ditchwitchmi.com
29. “2010 Specials”
January February March
Paint Chain
Service And
And
Special Sprockets
Decal Kits
April May June
Drill Pipe Filters
Head Shaft
And Or
Rebuild
Tooling Belts
July August September
Roto Witch Chain
Rods Wear Parts
And
Or For Drills
Irrigation Sprockets
October November December
Drill Pipe Tracks
Service
And Or
Special
Tooling Tires
“Take Advantage Of Our Year Round
Free Pick-Up & Delivery”
Call Your Customer Support Representative For Complete Details!
Toll Free: (877)481-9931 or Local (517)546-9848
30. 3401 W. GRAND RIVER AVE.
HOWELL, MI 48855
(517)546-9848 OFFICE ∗ TOLL FREE (877)481-9931
FAX (517)546-9890
www.ditchwitchmi.com