1. Diplomado Salud, Higiene,
Seguridad y Medio Ambiente
Monclova, Coah.
Junio, 2009
Dr. Juan Antonio Del Río Mtz.
Diplomado Salud, Higiene, Seguridad y Medio
1 Ambiente, Monclova 2009
2. ¿Cómo Evaluar Factores de Riesgo Evaluación de Riesgo
Ergonómicos?
Identificación Básica de Riesgos
de Factores Ergonómicos
Baseline
Risk
Identification of
Ergonomic
Factors
Diplomado Salud, Higiene, Seguridad y Medio
2 Ambiente, Monclova 2009
4. Cuándo utilizar la encuesta BRIEFMR? Evaluación de Riesgo
Cuándo utilizar la encuesta BRIEF:
Cuando se desea un alto grado de
detalle
Cuando los factores de riesgo presentes
en el trabajo no se comprenden
claramente
Cuando se priorizan trabajos para
mejora
Cuando la reducción del riesgo debe
medirse
Diplomado Salud, Higiene, Seguridad y Medio
4 Ambiente, Monclova 2009
5. Tiene limitaciones de la encuesta
Evaluación de Riesgo
BRIEFMR?
Limitaciones de la encuesta BRIEF
Diseñada para analizar el trabajo con
tareas específicas que son repetidas a
través de un ciclo.
Diplomado Salud, Higiene, Seguridad y Medio
5 Ambiente, Monclova 2009
6. ¿Cómo llenar la encuesta BRIEF MR ? Paso 1
Carga de Tarima Prod. HT Ergo #2
20/09/02 Embarque 1st Orden del cliente
Diplomado Salud, Higiene, Seguridad y Medio
6 Ambiente, Monclova 2009
7. Paso 2a
¿Cómo llenar la encuesta BRIEF MR ?
Diplomado Salud, Higiene, Seguridad y Medio
7 Ambiente, Monclova 2009
8. Paso 2b
¿Cómo llenar la encuesta BRIEF MR ?
Diplomado Salud, Higiene, Seguridad y Medio
8 Ambiente, Monclova 2009
9. Paso 3
¿Cómo llenar la encuesta BRIEF MR ?
3 2
Diplomado Salud, Higiene, Seguridad y Medio
9 Ambiente, Monclova 2009
10. Paso 4
¿Cómo llenar la encuesta BRIEF MR ?
L
SS
Diplomado Salud, Higiene, Seguridad y Medio
10 Ambiente, Monclova 2009
11. Puntuación de Encuesta Riesgo Bajo
BRIEF MR
Riesgo Bajo
• Puntuación BRIEF = 1
• Postura o Fuerza son los únicos
factores de riesgo
1
Diplomado Salud, Higiene, Seguridad y Medio
11 Ambiente, Monclova 2009
12. Puntuación de Encuesta Riesgo Medio
BRIEF MR
Riesgo Bajo
•Puntuación BRIEF = 1
• Postura o Fuerza son los únicos
factores de riesgo
Riesgo Medio
• Puntuación BRIEF = 2
• Postura o Fuerza + 1 Factor de riesgo
adicional está presente
2
Diplomado Salud, Higiene, Seguridad y Medio
12 Ambiente, Monclova 2009
13. Riesgo Alto
Puntuación de Encuesta BRIEFMR
Riesgo Bajo
• Puntuación BRIEF = 1
• Postura o Fuerza son los únicos
factores de riesgo
Riesgo Medio
• Puntuación BRIEF = 2
• Postura o Fuerza + 1 Factor de riesgo
adicional está presente
Riesgo Alto
• Puntuación BRIEF = 3 o 4
3 • Postura o Fuerza + 2 o más factores de
riesgo adicionales están presentes.
Diplomado Salud, Higiene, Seguridad y Medio
13 Ambiente, Monclova 2009
15. 167
Umbrales de Postura para Muñeca Posturas
Flexionada ≥ 45° Extendida ≥ 45°
Desviación Cubital Desviación Radial
Diplomado Salud, Higiene, Seguridad y Medio
15 Ambiente, Monclova 2009
16. 168
Umbrales de Fuerza para Muñeca Fuerzas
Agarre de Presión con
Pellizco ≥ 2 lb (0.9Kg). Dedos ≥ 2 lb (0.9Kg).
Agarre de
Fuerza ≥ 10 lb (4.5Kg).
Diplomado Salud, Higiene, Seguridad y Medio
16 Ambiente, Monclova 2009
17. 168
Umbrales de Duración para Muñecas Duración
Trauma > 10 seg – Cualquier
factor de riesgo de
fuerza o postura
sostenido por 10
segundos o más
WMSD
Válvula
de
Alivio
Diplomado Salud, Higiene, Seguridad y Medio
17 Ambiente, Monclova 2009
18. 168
Umbrales de Frecuencia para Muñecas Frecuencia
> 30/min – Una medición acumulada de
cualquier combinación de factores de
riesgo de fuerza y postura ocurriendo 30
veces por minuto o más.
IIII IIII
IIII IIII
IIII IIII
Diplomado Salud, Higiene, Seguridad y Medio
18 Ambiente, Monclova 2009
19. 169
Umbrales de Postura para Codos Posturas
Antebrazo Girado
Diplomado Salud, Higiene, Seguridad y Medio
19 Ambiente, Monclova 2009
20. 169
Umbrales de Postura para Codos Posturas
> 135°
Totalmente Extendido
Diplomado Salud, Higiene, Seguridad y Medio
20 Ambiente, Monclova 2009
21. 169
Umbrales de Fuerza para Codos Fuerza
Manejar un
peso o ejercer
fuerza con un
brazo que sea ≥
10 lb (4.5Kg) o
con dos brazos
que sea ≥ 15 lb
(6.8Kg).
Diplomado Salud, Higiene, Seguridad y Medio
21 Ambiente, Monclova 2009
22. 168
Umbrales de Duración para Codos Duración
Trauma > 10 seg – Cualquier
factor de riesgo de
fuerza o postura
sostenido por 10
segundos o más
WMSD
Válvula
de
Alivio
Diplomado Salud, Higiene, Seguridad y Medio
22 Ambiente, Monclova 2009
23. 168
Umbrales de Frecuencia para Codos Frecuencia
> 2/min – Una medición acumulada de
cualquier combinación de factores de
riesgo de fuerza y postura ocurriendo 2
veces por minuto o más.
II
Diplomado Salud, Higiene, Seguridad y Medio
23 Ambiente, Monclova 2009
24. 170
Umbrales de Postura para Hombros Posturas
Brazo levantado ≥ 45°
Diplomado Salud, Higiene, Seguridad y Medio
24 Ambiente, Monclova 2009
25. Umbrales de Postura para Hombros Posturas
Brazo detrás del cuerpo Hombros encogidos
Diplomado Salud, Higiene, Seguridad y Medio
25 Ambiente, Monclova 2009
26. Umbrales de Fuerza para Hombros Fuerza
Manejar un peso o ejercer fuerza con un
brazo que sea ≥ 10 lb (4.5Kg) o con dos
brazos que sea ≥ 15 lb (6.8Kg).
Diplomado Salud, Higiene, Seguridad y Medio
26 Ambiente, Monclova 2009
27. Umbrales de Duración para Hombros Duración
Trauma > 10 seg – Cualquier
factor de riesgo de
fuerza o postura
sostenido por 10
segundos o más
WMSD
Válvula
de
Alivio
Diplomado Salud, Higiene, Seguridad y Medio
27 Ambiente, Monclova 2009
28. 170
Umbrales de Frecuencia para Hombros Frecuencia
> 2/min – Una medición acumulada de
cualquier combinación de factores de
riesgo de fuerza y postura ocurriendo 2
veces por minuto o más.
II
Diplomado Salud, Higiene, Seguridad y Medio
28 Ambiente, Monclova 2009
29. 171
Umbrales de Postura para Cuello Posturas
≥ 30°
Flexionado ≥ 30° Extendido
Diplomado Salud, Higiene, Seguridad y Medio
29 Ambiente, Monclova 2009
30. 171
Umbrales de Postura para Cuello Posturas
De lado Torcido ≥ 20°
Diplomado Salud, Higiene, Seguridad y Medio
30 Ambiente, Monclova 2009
31. 172
Umbrales de Fuerza para Cuello Fuerza
Una fuerza
ejercida sobre o
por el cuello
que sea ≥ 2 lb
(0.9Kg) .
Las máscaras viejas para soldar pueden pesar > 2 lb.
Diplomado Salud, Higiene, Seguridad y Medio
31 Ambiente, Monclova 2009
32. Umbrales de Duración para Cuello Duración
Trauma > 10 seg – Cualquier
factor de riesgo de
fuerza o postura
sostenido por 10
segundos o más
WMSD
Válvula
de
Alivio
Diplomado Salud, Higiene, Seguridad y Medio
32 Ambiente, Monclova 2009
33. Umbrales de Frecuencia para Cuello Frecuencia
> 2/min – Una medición acumulada de
cualquier combinación de factores de
riesgo de fuerza y postura ocurriendo 2
veces por minuto o más.
II
Diplomado Salud, Higiene, Seguridad y Medio
33 Ambiente, Monclova 2009
34. 175
Umbrales de Postura para Espalda Posturas
Flexionada ≥ 20° De lado Extendida
Diplomado Salud, Higiene, Seguridad y Medio
34 Ambiente, Monclova 2009
35. 175
Umbrales de Postura para Espalda Posturas
Torcida Sin Soporte
Diplomado Salud, Higiene, Seguridad y Medio
35 Ambiente, Monclova 2009
36. Umbrales de Fuerza para la Espalda Fuerza
Una fuerza
ejercida sobre o
por la espalda
qe sea ≥ 25 lb
(11.3Kg).
La puerta lateral de un coche pesa 25.7 lb
Diplomado Salud, Higiene, Seguridad y Medio
36 Ambiente, Monclova 2009
37. Umbrales de Duración para Espalda Duración
Trauma > 10 seg – Cualquier
factor de riesgo de
fuerza o postura
sostenido por 10
segundos o más
WMSD
Válvula
de
Alivio
Diplomado Salud, Higiene, Seguridad y Medio
37 Ambiente, Monclova 2009
38. Umbrales de Frecuencia para Espalda Frecuencia
> 2/min – Una medición acumulada de
cualquier combinación de factores de
riesgo de fuerza y postura ocurriendo 2
veces por minuto o más.
II
Diplomado Salud, Higiene, Seguridad y Medio
38 Ambiente, Monclova 2009
39. 177
Umbrales de Postura para Piernas Posturas
Agachado Arrodillado Sin Soporte
Diplomado Salud, Higiene, Seguridad y Medio
39 Ambiente, Monclova 2009
40. 177
Umbrales de Fuerza para Piernas Fuerza
Una fuerza de 10 lb (4.5Kg) o más ejercida
por el tobillo para activar el pedal.
Diplomado Salud, Higiene, Seguridad y Medio
40 Ambiente, Monclova 2009
41. Leg Duration Thresholds Duration
Trauma > 30 % of the day – Any
one force or posture risk
factor sustained for 30%
of the day or more
WMSD
Healing
Valve
Diplomado Salud, Higiene, Seguridad y Medio
41 Ambiente, Monclova 2009
42. Umbrales de Duración para Piernas Duración
> 30% del turno.
Trauma
Cualquier factor de
riesgo de fuerza o
postura sostenido por
30% del tiempo del turno
o más.
WMSD
Válvula
de
Alivio
Diplomado Salud, Higiene, Seguridad y Medio
42 Ambiente, Monclova 2009
43. Umbrales de Frecuencia para Piernas Frecuencia
> 2/min – Una medición acumulada de
cualquier combinación de factores de
riesgo de fuerza y postura ocurriendo 2
veces por minuto o más.
II
Diplomado Salud, Higiene, Seguridad y Medio
43 Ambiente, Monclova 2009
44. Vibración/Temp.
Factores Físicos Estresantes
Exposición a bajas
temperaturas (debajo de 66°F o
18.8°C) en herramientas
manuales o del ambiente
laboral por más de 2 horas/día.
Exposición completa o parcial a
herramientas o equipos
vibratorios
Diplomado Salud, Higiene, Seguridad y Medio
44 Ambiente, Monclova 2009
45. 178
Impacto/Contacto/Guantes
Factores Físicos Estresantes
Fuerza dinámica aplicada al cuerpo
Asegúrse que los
guantes sean Bordes duros o con filo
apropiados para la presionando contra tejidos
persona (talla) y ara la suaves del cuerpo
tarea.
Diplomado Salud, Higiene, Seguridad y Medio
45 Ambiente, Monclova 2009
47. 180
ANTES
Medir la Reducción del Riesgo
Medición Inicial
Diplomado Salud, Higiene, Seguridad y Medio
47 Ambiente, Monclova 2009
48. DESPUÉS
Medir la Reducción del Riesgo
Se instaló elevador
de tarima con parte
superior giratoria
Cuantificación de
Mejora por
Reducción de
Riesgo
Diplomado Salud, Higiene, Seguridad y Medio
48 Ambiente, Monclova 2009
49. DESPUÉS
Medir la Reducción del Riesgo
Se instaló elevador
de tarima con parte
superior giratoria
Cuantificación de
Mejora por
Reducción de
Riesgo
Diplomado Salud, Higiene, Seguridad y Medio
49 Ambiente, Monclova 2009
50. Evaluar el Riesgo
Fallas Potenciales
Falla Potencial Método Recomendado
La operación tiene un ciclo muy Enlistar todas las tareas involucradas en la operación.
largo o no tiene un ciclo Determine las actividades de mayor preocupación, basado en
definido. comentarios de los operadores e historial de lesiones. Llene la
encuesta BRIEF para aquellas actividades de mayor
preocupación.
Existen múltiples operadores en Encuente al operador más experimentado y llene la encuesta
la misma tarea. BRIEF en su puesto de trabajo. Para compararlos, llene la
encesta BRIEF en otra estación de trabajo y compare los
resultados.
Múltiples operadores hacen Encuentre al operador más experimentado para usarlo como
rotación en la misma estación patrón de comparación, llene la encuesta BRIEF con un
de trabajo. operador que haga la actividad de manera diferente.
El trabajo no puede ser Llene la encuesta BRIEF en “tiempo real”, mientras observa al
videograbado (Seguridad) oerador trabajar. Esto es poco confiable, pero con un empleado
cooperativo es posible.
Operadores sin experiencia No llene la encuesta BRIEF con un operador experimentado.
podrían ser ubicados para Regrese a la tarea actividad después de que los trabajadores
videograbar una tarea/actividad. hayan acumulado 30 días de experiencia.
Diplomado Salud, Higiene, Seguridad y Medio
50 Ambiente, Monclova 2009
51. Formulario con Derechos de Autor
Aviso de Uso
Humantech exhorta a los participantes del entrenamiento
a utilizar los formularios de este curso para uso personal.
Copias serán usadas solamente para uso personal en
relación al trabajo
Estos derechos otorgados no son transferibles a
otras personas.
Ningún formulario podrá ser modificado sin la
autorización por escrito de Humantech.
Avisos apropiados de Derechos de Autor y Marca
Registrada deberán mantenerse en todas las copias
de los formularios.
Diplomado Salud, Higiene, Seguridad y Medio
51 Ambiente, Monclova 2009
Notas del editor
These slides discuss the use of the BRIEF Survey, the cornerstone of our risk assessment activities.
These slides discuss the use of the BRIEF Survey, the cornerstone of our risk assessment activities.
Ultimately, we seek to maintain current BRIEF analyses of all jobs, as we seek to measure (and manage) risk reduction and to prioritize limited resources. The rate that we will work toward this goal is 2 or more analyses monthly, once your site has formally rolled out the RPM software.
Jobs with very broad scope, such as maintenance, must be broken down into smaller tasks that are more narrowly defined, even if the task is performed intermittently.
Complete header information so the analysis may be filed.
The BRIEF consists of a walking tour through nine body parts, considering 4 primary and 5 secondary risk factors. Posture and Force are assessed first, for each given body part.
If one or both are present, Duration and Frequency (Repetition) are then assessed. There can be no Duration or Frequency without Posture or Force. Ask yourself Duration or Frequency of what? Posture and Force! Note that Duration is the opposite of Frequency. Frequency is repetition of a poor posture, whereas duration means holding a poor posture for an extended period of time.
Scores are tallied for each body part (column). Each cell may be thought of as “On” or “Off”. Each risk factor per body part (cell) can receive 1 point if it is on, or zero points if it is off. This is true regardless of the number of conditions that might be noted per cell. For example, while there may be up to 4 postures observed for the wrist, the score for that cell is 1 if one are more are present, otherwise 0.
If the column total (one point per cell that is “On”) for a body part (e.g. left wrist) is either 0 or 1, the job is characterized as “Low Risk”.
If the column total (one point per cell that is “On”) for a body part (e.g. left wrist) is 2, the job is characterized as “Medium Risk”.
If the column total (one point per cell that is “On”) for a body part (e.g. left wrist) is either 3 or 4, the job is characterized as “High Risk”.
Higher risk leads to higher rates
For the wrist, there are 4 postures we are looking to identify: - Flexed at 45 degrees - Extended at 45 degrees - Ulnar deviation (pinky side) – observable - Radial deviation (thumb side) – observable
For the wrist, there are 3 force observations we are looking to identify: - Pinching in excess of 2 pounds - Pressing with the fingers ( a pinch between fingers and an external object) also in excess of 2 pounds - Power grip (fingers wrapped) in excess of 10 pounds
For wrist Duration, we seek to identify whether any posture or exertion factor is sustained for 10 seconds or more.
For wrist Frequency, we seek to identify whether any posture and/or exertion factor occurs 30 or more times per minute. This is any combination of Postures and Exertions (at or above the defined thresholds).
The “neutral” posture of the elbow positions the hands 15 degrees rotated up from parallel to the floor. In driving school, they refer to this as the 10 o’clock and 2 o’clock positions. Forearm rotation (about the elbow) is defined as movement exceeding 45 degrees in either direction from neutral (a held posture) or sweeping the arc between (a “flipping” movement).
Elbow extension is opening the angle between the forearm and upper arm to 135 degrees or greater.
The Force threshold for the elbow is 10 pounds for a single arm, or 15 pounds or greater using both arms.
For wrist Duration, we seek to identify whether any posture or exertion factor is sustained for 10 seconds or more.
For wrist Frequency, we seek to identify whether any posture and/or exertion factor occurs 30 or more times per minute. This is any combination of Postures and Exertions (at or above the defined thresholds).
For the shoulder, there are 4 postures we are looking to identify: - Reaching forward so the angle between the upper arm and the trunk is 45 degrees or greater - Abducting the elbow (chicken wing, away from the side) so the angle between the upper arm and the trunk is 45 degrees or greater See next slide too
For the shoulder, there are 4 postures we are looking to identify: - Arm behind the body occurs when the elbow breaks the plane of the back - Shoulders shrugged – observable See previous slide too
The Force threshold for the shoulder, like the elbow, is 10 pounds for a single arm, or 15 pounds or greater using both arms.
For wrist Duration, we seek to identify whether any posture or exertion factor is sustained for 10 seconds or more.
For wrist Frequency, we seek to identify whether any posture and/or exertion factor occurs 30 or more times per minute. This is any combination of Postures and Exertions (at or above the defined thresholds).
For the neck, there are 4 postures we are looking to identify: - Neck flexion – tipping the head forward 30 degrees or greater - Neck extension – tipping the head forward observably See next slide too
For the neck, there are 4 postures we are looking to identify: - Neck bent sideways – tipping the head toward either shoulder observably - Neck rotation – twisting the neck in either direction (like an owl) 20 degrees or greater See previous slide too
The force threshold for the neck is 2 pounds or greater. It is not common to generate force with the neck to perform work. Example include using heavy headgear, such as a welding mask, or exerting against a strap, like a “Duluth pack”.
For wrist Duration, we seek to identify whether any posture or exertion factor is sustained for 10 seconds or more.
For wrist Frequency, we seek to identify whether any posture and/or exertion factor occurs 30 or more times per minute. This is any combination of Postures and Exertions (at or above the defined thresholds).
For the back, there are 5 postures we are looking to identify: - Back flexion – bending forward 20 degrees or greater - Side bending – any observable lateral bending to either side - Back extension – leaning backwards observably See next slide too
For the back, there are 5 postures we are looking to identify: - Back twisting – rotating the spine in either direction observably - Unsupported back – sitting on a chair or surface without the use of a back support See the previous slide too
The Force threshold for the back is 25 pounds.
For wrist Duration, we seek to identify whether any posture or exertion factor is sustained for 10 seconds or more.
For wrist Frequency, we seek to identify whether any posture and/or exertion factor occurs 30 or more times per minute. This is any combination of Postures and Exertions (at or above the defined thresholds).
For the legs, there are 3 postures we are looking to identify: - Squatting – Crouching such that the angle between upper leg (thigh) and the walking surface becomes 45 degrees or less -Kneeling – Placing the weight of the body on one or both knees on a work surface - Unsupported legs – sitting on a chair or surface without contact of the feet on a surface (Edith Ann)
The Force threshold for the legs, through the feet (foot peddle) or knees (like some sewing machines) is 10 pounds or greater.
Duration for the legs is a Force or Posture factor that occurs continuously for 30 percent of the workday or longer
For wrist Duration, we seek to identify whether any posture or exertion factor is sustained for 10 seconds or more.
For wrist Frequency, we seek to identify whether any posture and/or exertion factor occurs 30 or more times per minute. This is any combination of Postures and Exertions (at or above the defined thresholds).
There are 5 secondary risk factors in addition to the 4 primary risk factors (posture, Force, Duration and Frequency), : - Vibration – There are 2 forms of vibration exposure: Segmental (the use of a tool or surface that shakes the arms) and Whole-body that shakes the spine (a vibrating platform, or seating, such as a bus, semi or equipment driver) - Low temperatures – contact or exposure to temperatures at or below 66 degrees F for more than 2 hours per day See next slide too
There are 5 secondary risk factors in addition to the 4 primary risk factors (posture, Force, Duration and Frequency), : - Impact stress – Force generated by pounding the body against a surface (e.g. using the hand as a hammer) - Contact stress – Pressing the body against a sharp object or surface, restricting blood flow (tools that dig into the hand, sharp table edges, etc.) Glove Issues – Gloves that either do not fit well (too big or too small), OR gloves that are too thick for the task
SAMPLE – Completed BRIEF Survey. Note that for posture… the box is checked if one or more awkward postures are observed. A checked posture box adds one point to the BRIEF score for a given body part, regardless of awkward postures are actually observed. The posture box remains unchecked, only if NO awkward postures are observed for that body part. Section 2b (Duration and Frequency) are only completed if Posture and/or Force is observed in Section 2a. This is to say, you cannot have a Duration or a Frequency without an observed Posture or Force. TIP: It may be helpful to write R, L or R/L by each Posture or Force condition so that it will be easier to translate this information into RPM later.
Here is how the BRIEF Survey may be used to characterize improvement. This slide shows a BRIEF Survey taken before improvements, as the job is done now.
After installing a lift assist device, the job is re-evaluated using the BRIEF Survey once again. If an improvement makes a job better (less risky), one would expect improved numbers for some risk factors. We see that this is indeed the case, as indicated by the red boxes.
Here is a before-and-after summary which shows the risk impact (reduced risk) for implementing this lift assist. TIP: The cost justification tool being developed will turn this risk reduction into a dollar-value impact, based on our actuarial experience with Workers Comp costs.
All tools and models have limitations – the goal of a model is to represent complex reality. This chart lists some common challenges and perspectives for dealing with them.
The BRIEF Survey is a proprietary technology that Tyson has licensed to use from Humantech. We are free to use this tool, but please respect the usage conditions outlined above.