Looking to acquire a job as automation tester? You might be skilled however, you need to impress the interviewer first. Go through this obvious interview questions and make it possible
Looking to acquire a job as automation tester? You might be skilled however, you need to impress the interviewer first. Go through this obvious interview questions and make it possible
Manual testing interview questions and answersTestbytes
Manual tester jobs are in plenty out there. The skill is greatly in demand owing to the sudden rise in the importance of QA/software testing in software development there will be a sustained demand for the job. When it comes to manual tester jobs, interviews might be happening as you read this. To be a part of a prestigious company, you need to first crack the interview which often has a verbal section where you have to answer manual testing interview questions.
SO when have compiled the most probable manual testing interview questions in this blog so that you can ace the next manual tester interview with ease.
You can find all of them here also--> https://www.testbytes.net/blog/manual-testing-interview-questions-answers/
resume graham (2006) book FUNDAMENTALS OF TESTING
resume of Graham et al Foundationf of Software Testing (2006)
created by Fadhilla Elita information system class
YouTube Link: https://youtu.be/cv6GvRCIuTs
** Test Automation Masters Program: https://www.edureka.co/masters-progra... **
This Edureka PPT on "What is Software Testing?" will give you a brief introduction to what software testing and all the basics concept related to software testing.
The following are the topics covered in the session:
Software Risks
What is Software Testing?
Principles of Sofware Testing
Software Testing Life Cycle
Dynamic Software Testing
Future of Sofware Testing
Follow us to never miss an update in the future.
YouTube: https://www.youtube.com/user/edurekaIN
Instagram: https://www.instagram.com/edureka_learning/
Facebook: https://www.facebook.com/edurekaIN/
Twitter: https://twitter.com/edurekain
LinkedIn: https://www.linkedin.com/company/edureka
Castbox: https://castbox.fm/networks/505?country=in
TOPS Technologies offer Professional Software Testing Training in Ahmedabad.
Ahmedabad Office (C G Road)
903 Samedh Complex,
Next to Associated Petrol Pump,
CG Road,
Ahmedabad 380009.
http://www.tops-int.com/live-project-training-software-testing.html
Most experienced IT Training Institute in Ahmedabad known for providing software testing course as per Industry Standards and Requirement.
An Overview of User Acceptance Testing (UAT)Usersnap
What is User Acceptance Testing? Also known as UAT or UAT testing.
it's basically, a process of verifying that a solution works for the user.
And the key word here, is user. This is crucial, because they’re the people who will use the software on a daily basis. There are many aspects to consider with respect to software functionality. There’s unit testing, functional testing, integration testing, and system testing, amongst many others.
What Is User Acceptance Testing?
I’ll keep it simple; according to Techopedia, UAT (some people call it UAT testing as well) is:
User acceptance testing (UAT) is the last phase of the software testing process. During UAT, actual software users test the software to make sure it can handle required tasks in real-world scenarios, according to specifications. UAT is one of the final and critical software project procedures that must occur before newly developed software is rolled out to the market.
User acceptance testing (UAT), otherwise known as Beta, Application, or End-User Testing, is often considered the last phase in the web development process, the one before final installation of the software on the client site, or final distribution of it.
Manual testing interview questions and answersTestbytes
Manual tester jobs are in plenty out there. The skill is greatly in demand owing to the sudden rise in the importance of QA/software testing in software development there will be a sustained demand for the job. When it comes to manual tester jobs, interviews might be happening as you read this. To be a part of a prestigious company, you need to first crack the interview which often has a verbal section where you have to answer manual testing interview questions.
SO when have compiled the most probable manual testing interview questions in this blog so that you can ace the next manual tester interview with ease.
You can find all of them here also--> https://www.testbytes.net/blog/manual-testing-interview-questions-answers/
resume graham (2006) book FUNDAMENTALS OF TESTING
resume of Graham et al Foundationf of Software Testing (2006)
created by Fadhilla Elita information system class
YouTube Link: https://youtu.be/cv6GvRCIuTs
** Test Automation Masters Program: https://www.edureka.co/masters-progra... **
This Edureka PPT on "What is Software Testing?" will give you a brief introduction to what software testing and all the basics concept related to software testing.
The following are the topics covered in the session:
Software Risks
What is Software Testing?
Principles of Sofware Testing
Software Testing Life Cycle
Dynamic Software Testing
Future of Sofware Testing
Follow us to never miss an update in the future.
YouTube: https://www.youtube.com/user/edurekaIN
Instagram: https://www.instagram.com/edureka_learning/
Facebook: https://www.facebook.com/edurekaIN/
Twitter: https://twitter.com/edurekain
LinkedIn: https://www.linkedin.com/company/edureka
Castbox: https://castbox.fm/networks/505?country=in
TOPS Technologies offer Professional Software Testing Training in Ahmedabad.
Ahmedabad Office (C G Road)
903 Samedh Complex,
Next to Associated Petrol Pump,
CG Road,
Ahmedabad 380009.
http://www.tops-int.com/live-project-training-software-testing.html
Most experienced IT Training Institute in Ahmedabad known for providing software testing course as per Industry Standards and Requirement.
An Overview of User Acceptance Testing (UAT)Usersnap
What is User Acceptance Testing? Also known as UAT or UAT testing.
it's basically, a process of verifying that a solution works for the user.
And the key word here, is user. This is crucial, because they’re the people who will use the software on a daily basis. There are many aspects to consider with respect to software functionality. There’s unit testing, functional testing, integration testing, and system testing, amongst many others.
What Is User Acceptance Testing?
I’ll keep it simple; according to Techopedia, UAT (some people call it UAT testing as well) is:
User acceptance testing (UAT) is the last phase of the software testing process. During UAT, actual software users test the software to make sure it can handle required tasks in real-world scenarios, according to specifications. UAT is one of the final and critical software project procedures that must occur before newly developed software is rolled out to the market.
User acceptance testing (UAT), otherwise known as Beta, Application, or End-User Testing, is often considered the last phase in the web development process, the one before final installation of the software on the client site, or final distribution of it.
Interview questions and answers for quality assuranceGaruda Trainings
Future of Software Testing is always good... as long as developers are developing projects we will be testing them and even when they stops developing then also we will test the enhancements and maintenance etc... Testing will always be needed
Customer will never accept the product Without complete testing .Scope of testing is always good as it gives everyone a confidence of the work we all are doing...Its always good to add more processes while doing testing so that one should not think that testing is a boring and easy job....Process is very imp. for testing.
Register for Free DEMO: www.p2cinfotech.com
email id: p2cinfotech@gmail.com
+1-732-546-3607 (USA)
Software Quality Assurance training by QuontraSolutionsQUONTRASOLUTIONS
Quontra Solutions provides QA training by Real time Industry experts. QA is having good demand in the market. Our QA online training Instructors are very much experienced and highly qualified and dedicated.
Our QA online training program is job oriented. After completion of QA training with us you should be able to work on any kind of project. After completion of QA online training our dedicated team will be supporting you.
Want to move your career forward? Looking to build your leadership skills while helping others learn, grow, and improve their skills? Seeking someone who can guide you in achieving these goals?
You can accomplish this through a mentoring partnership. Learn more about the PMISSC Mentoring Program, where you’ll discover the incredible benefits of becoming a mentor or mentee. This program is designed to foster professional growth, enhance skills, and build a strong network within the project management community. Whether you're looking to share your expertise or seeking guidance to advance your career, the PMI Mentoring Program offers valuable opportunities for personal and professional development.
Watch this to learn:
* Overview of the PMISSC Mentoring Program: Mission, vision, and objectives.
* Benefits for Volunteer Mentors: Professional development, networking, personal satisfaction, and recognition.
* Advantages for Mentees: Career advancement, skill development, networking, and confidence building.
* Program Structure and Expectations: Mentor-mentee matching process, program phases, and time commitment.
* Success Stories and Testimonials: Inspiring examples from past participants.
* How to Get Involved: Steps to participate and resources available for support throughout the program.
Learn how you can make a difference in the project management community and take the next step in your professional journey.
About Hector Del Castillo
Hector is VP of Professional Development at the PMI Silver Spring Chapter, and CEO of Bold PM. He's a mid-market growth product executive and changemaker. He works with mid-market product-driven software executives to solve their biggest growth problems. He scales product growth, optimizes ops and builds loyal customers. He has reduced customer churn 33%, and boosted sales 47% for clients. He makes a significant impact by building and launching world-changing AI-powered products. If you're looking for an engaging and inspiring speaker to spark creativity and innovation within your organization, set up an appointment to discuss your specific needs and identify a suitable topic to inspire your audience at your next corporate conference, symposium, executive summit, or planning retreat.
About PMI Silver Spring Chapter
We are a branch of the Project Management Institute. We offer a platform for project management professionals in Silver Spring, MD, and the DC/Baltimore metro area. Monthly meetings facilitate networking, knowledge sharing, and professional development. For event details, visit pmissc.org.
The Impact of Artificial Intelligence on Modern Society.pdfssuser3e63fc
Just a game Assignment 3
1. What has made Louis Vuitton's business model successful in the Japanese luxury market?
2. What are the opportunities and challenges for Louis Vuitton in Japan?
3. What are the specifics of the Japanese fashion luxury market?
4. How did Louis Vuitton enter into the Japanese market originally? What were the other entry strategies it adopted later to strengthen its presence?
5. Will Louis Vuitton have any new challenges arise due to the global financial crisis? How does it overcome the new challenges?Assignment 3
1. What has made Louis Vuitton's business model successful in the Japanese luxury market?
2. What are the opportunities and challenges for Louis Vuitton in Japan?
3. What are the specifics of the Japanese fashion luxury market?
4. How did Louis Vuitton enter into the Japanese market originally? What were the other entry strategies it adopted later to strengthen its presence?
5. Will Louis Vuitton have any new challenges arise due to the global financial crisis? How does it overcome the new challenges?Assignment 3
1. What has made Louis Vuitton's business model successful in the Japanese luxury market?
2. What are the opportunities and challenges for Louis Vuitton in Japan?
3. What are the specifics of the Japanese fashion luxury market?
4. How did Louis Vuitton enter into the Japanese market originally? What were the other entry strategies it adopted later to strengthen its presence?
5. Will Louis Vuitton have any new challenges arise due to the global financial crisis? How does it overcome the new challenges?
2. www.garudatrainings.com
Ph: +1-508-841-6144
QA Interview Questions and Answers
Q1. What is difference between QA, QC and Software Testing?
Quality Assurance (QA): QA refers to the planned and systematic way of monitoring the quality of
process which is followed to produce a quality product. QA tracks the outcomes and adjusts the process
to meet the expectation.
Quality Control (QC): Concern with the quality of the product. QC finds the defects and suggests
improvements. The process set by QA is implemented by QC. The QC is the responsibility of the tester.
Software Testing: is the process of ensuring that product which is developed by the developer meets the
user requirement. The motive to perform testing is to find the bugs and make sure that they get fixed.
Q2. When to start QA in a project?
A good time to start the QA is from the beginning of the project startup. This will lead to plan the process
which will make sure that product coming out meets the customer quality expectation. QA also plays a
major role in the communication between teams. It gives time to step up the testing environment. The
testing phase starts after the test plans are written, reviewed and approved.
Q3. What are verification and validation?
Verification: process of evaluating steps which is followed up to development phase to determine
whether they meet the specified requirements for that stage.
Validation: process of evaluating product during or at the end of the development process to determine
whether product meets specified requirements.
Q4. Difference between Verification and Validation?
Verification is Static Testing where as Validations is Dynamic Testing.
Verification takes place before validation.
Verification evaluates plans, documents, requirements and specifications, where as Validation
evaluates product.
Verification inputs are checklist, issues list, walkthroughs and inspection, where as in Validation
testing of actual product.
Verification output is set of documents, plans, specifications and requirement documents where
as in Validation actual product is output.
Ph: +1-508-841-6144
3. www.garudatrainings.com
Ph: +1-508-841-6144
QA Interview Questions and Answers
Q5. What is difference between Smoke testing and Sanity Testing?
The difference between smoke and sanity testing is described below:
Sanity testing is performed when new build is released after fixing bugs where as smoke testing
is performed to check the major functionalities of the application.
Sanity is performed by the tester or the developer but smoke testing can be performed by the
tester or developer.
Smoke testing is performed earlier where as sanity is performed after the smoke testing.
Sanity testing is narrow and deep approach of testing and smoke testing is focused testing based
on major functionalities.
Q6. What is destructive testing, and what are its benefits?
Destructive testing includes methods where material is broken down to evaluate the mechanical
properties, such as strength, toughness and hardness.For example, finding the quality of a weld is good
enough to withstand extreme pressure and also to verify the properties of a material.
Benefits of Destructive Testing (DT)
Verifies properties of a material
Determines quality of welds
Helps you to reduce failures, accidents and costs
Ensures compliance with regulations
Q7. What is Testware?
The testware is:
The subset of software which helps in performing the testing of application.
Testware are required to plan, design, and execute tests. It contains documents, scripts, inputs,
expected results, set-up and additional software or utilities used in testing.
Testware is term given to combination of all utilities and application software that required for
testing a software package.
Testware is special because it has:
1. Different purpose
2. Different metrics for quality and
3. Different users
Ph: +1-508-841-6144
4. www.garudatrainings.com
Ph: +1-508-841-6144
QA Interview Questions and Answers
Q8. What is difference between Retesting and Regression testing?
The difference between Retesting and Regression testing are below:
Retesting is done to verify defects fixes where as regression is perform to check if the defect fix
have not impacted other functionality that was working fine before doing changes in the code.
Retesting is planned testing based on the defect fixes listed where as regression is not be always
specific to any defect fix. Also regression can be executed for some modules or all modules.
Retesting concern with executing those test cases that are failed earlier whereas regression
concern with executing test cases that was passed in earlier builds.
Retesting has higher priority over regression, but in some case retesting and regression testing
are carried out in parallel.
Q9. Explain bug life cycle.
Bug Life Cycle:
When a tester finds a bug .The bug is assigned with NEW or OPEN status.
The bug is assigned to development project manager who will analyze the bug .He will check
whether it is a valid defect. If it is not valid bug is rejected, now status is REJECTED.
If not, next the defect is checked whether it is in scope. When bug is not part of the current
release .Such defects are POSTPONED
Now, Tester checks whether similar defect was raised earlier. If yes defect is assigned a status
DUPLICATE
When bug is assigned to developer. During this stage bug is assigned a status IN-PROGRESS
Once code is fixed. Defect is assigned with FIXED status.
Next the tester will re-test the code. In case the test case passes the defect is CLOSED
If the test case fails again the bug is RE-OPENED and assigned to the developer. That‟s all to
Bug Life Cycle.
Q10. What is severity and priority of bug? Give some example.
Priority: concern with application from the business point of view.
It answers: How quickly we need to fix the bug? Or How soon the bug should get fixed?
Severity: concern with functionality of application. It deals with the impact of the bug on the application.
How much the bug is affecting the functionality of the application?
High Priority and Low Severity:
Company logo is not properly displayed on their website.
High Priority and High Severity:
Suppose you are doing online shopping and filled payment information, but after submitting the
form, you get a message like "Order has been cancelled."
Low Priority and High Severity:
If we have a typical scenario in which the application get crashed, but that scenario exists rarely.
Low Priority and Low Severity:
There is a mistake like "You have registered success" instead of successfully, success is written.
Ph: +1-508-841-6144
5. www.garudatrainings.com
Ph: +1-508-841-6144
QA Interview Questions and Answers
Q11. What are the common problems with software automation?
Software problem are listed below:
1. Purchasing the license of tool (QTP, selenium, QC, LR)
2. Lack of skilled Tester to run the tool
3. Expectation that automated tests will find a lot of new defects
4. Maintenance of automated tests
5. Technical problems of tools
Q12. What is the role of QA in a project development?
QA stands for QUALITY ASSURANCE. QA team assures the quality by monitor the whole development
process. QA tracks the outcomes and adjusting process to meet the expectation.
The role of Quality Assurance is discussed below:
QA team is responsible for monitoring the process to be carried out for development.
Responsibilities of QA team are planning testing execution process.
QA Lead creates the time tables and agrees on a Quality Assurance plan for the product.
QA team communicated QA process to the team members.
QA team ensures traceability of test cases to requirements.
Q13. What is the difference between build and release?
BUILD: is a number given to installable software that is given to testing team for testing by the
development team. Build number assigned are incremental and sequential.
RELEASE: is a number given to installable software that is handed over to customer by the developer or
tester.
The information of build, release and version are displayed in software help page. Using this build and
release customer can let the customer team know which release version build thet are using.
eg "9.4.123.2" (Release Number.Version Number.Build Number.Patch Number)
Q14. What are the key challenges of software testing?
Following are some challenges of software testing
1. Application should be stable enough to be tested.
2. Testing always under time constraint
3. Understanding requirements, Domain knowledge and business user perspective understanding
4. W hich tests to execute first?
5. Testing the Complete Application
6. Regression testing
7. Lack of skilled testers.
Ph: +1-508-841-6144
6. www.garudatrainings.com
Ph: +1-508-841-6144
QA Interview Questions and Answers
8. Changing requirements
9. Lack of resources, tools and training
Q15.Why you choose automated testing over manual testing?
The reasons for choosing automation testing over manual testing are following:
1. Frequency of use of test case
2. Time Comparison (automated script run much faster than manual execution.)
3. Reusability of Automation Script
4. Adaptability of test case for automation.
5. Exploitation of automation tool.
Q16. What is the basis for choosing the SDLC model for development of software?
The choice of SDLC depends on the various factors, how stable are the requirements:
When the requirements are very clearly know, documented and not subject to change then we
can follow the waterfall model.
Most of the companies follow the V mode for the development because this model includes both
verification and validation activities and testing is involved in earlier phase.
Iterative model can be used to build application where requirement changes after a period of
times or application features or added on with smaller release. W hen the client is ready for the
delivery of the product in parts or phases.
Q17. Explain bug leakage and bug release.
Bug Leakage: W hen customer or end user discovered a bug which can be detected by the testing team.
Or when a bug is detected which can be detected in pervious build then this is called as Bug Leakage.
Bug release: is when a build is handed to testing team with knowing that defect is present in the release.
The priority and severity of bug is low. It is done when customer want the application on the time.
Customer can tolerate the bug in the released then the delay in getting the application and the cost
involved in removing that bug. These bugs are mentioned in the Release Notes handed to client for the
future improvement chances.
Q18. What is regression testing?
Regression Testing: When changes in the code of the software are made to fix the previous bug. Then
testing needs to be perform to ensure that it will not generate a new bug in the application and it works as
specified and that it has not negatively impacted any functionality that it offered previously. Regression
Testing is important because of following reason:
That the application works even after the alteration in the code were made.
The original functionality continues to work as specified even after doing changes in the software
application.
The alteration to the software application has not introduced any new bugs.
Ph: +1-508-841-6144
7. www.garudatrainings.com
Ph: +1-508-841-6144
QA Interview Questions and Answers
Q19.What is data driven testing?
Data Driven is an automation testing part in which test input or output values, these values are read from
data files. It is performed when the values are changing by the time. The different data files may include
data pools, csv files, Excel files. The data is then loaded into variables in recorded or manually coded
scripts. For data driven testing we use Parameterzing and Regular expression Technique.
Ex: To evaluate login functionality, we use different user name and password combinations, variables are
used to access different username and password. The list of username and password are stored in a
data table or excel sheet.
Q20. What is alpha and beta testing?
Alpha testing: is performed by the IN-House developers. After alpha testing the software is handed over
to software QA team, for additional testing in an environment that is similar to the client environment.
Beta testing: It is performed by end user. So that they can make sure that the product is bug free or
working as per the requirement. IN-house developers and software QA team perform alpha testing. The
public, a few select prospective customers or the general public performs beta testing.
Q21. What is ‘Software Quality Assurance’?
-SQA is monitoring and improving the process of software development.
-It ensures the standards and procedures which are agreed-upon, are met.
-Identifies the problems / bugs and ensures to resolve them.
-It prevents unnecessary functionalities in software products.
-It ensures the software requirements are met, and sometimes even crossing the levels of satisfaction.
Q22. What is Software Testing?
-Software testing is a process under controlled conditions and evaluating the expected results.
-Testing involves intentional attempt to make things go wrong, for the purpose of determining the things to
happen when they should not.
-Testing is oriented to „detection‟.
-Testing at times, a combined responsibility of one group which includes testers.
-The overall QA will be monitored by project managers.
-Nearly 25% of testing is the responsibility of development team including project manager.
Ph: +1-508-841-6144
8. www.garudatrainings.com
Ph: +1-508-841-6144
QA Interview Questions and Answers
Q23. Why does software have bugs?
Software bugs may occur due to:
a) Miscommunication or no communication
1. The exact need / requirements may not be properly communicated.
2. This causes development of software as per the perception of the developers.
b) Software Complexity
1. The complexity of the current software applications are difficult to understand for development team.
2. Multi-tiered architecture, sheer size of various applications, distributed computing etc., contributes to
the software complexity growth potential.
c) Programming errors
1. Errors in the programming as per the perception of the developers / team members
d) Time Pressures / Deadlines
e) Software projects scheduling is difficult.
f) Poorly documented code
1. Code modification and maintenance is tough.
2. Badly written or poor documentation causes the code comprehension difficult.
Q24: What are Baseline Documents?
Baseline documents are the documents, which have been approved by the customer and will not have
any more changes. Baseline Documents cover all the details of the project and have undergone
Walkthrough process. Once a document is Base-lined it cannot be changed unless there is a change
request duly approved by the customer. Service Level Agreement (SLA) & Business Requirement
Documents (BRD) are the examples of Baseline Documents.
Q25: What is Defect Density?
“Defect Density” Is a software metric defined as: Total number of defects per LOC (lines of
code). Alternatively It can be: Total number of defects per Size of the Project. Here the
measure of “Size of the Project” can be number of Function Points, Number of Feature
Points, number of Use Cases or KLOC (Kilo Lines of Code) etc
Q26: Why a software needs to be tested?
Every software product needs to be tested since, the development „process‟ is unable to
produce defect free software. Even if the development process is able to produce a defect
free software, we will not be able to know unless & until we test it. W ithout testing it, we
shall not be having enough confidence that it will work.
Testing not only identifies and reports defect but also measures the quality of the product,
which helps to decide whether to release the product, or not.
Ph: +1-508-841-6144
9. www.garudatrainings.com
Ph: +1-508-841-6144
QA Interview Questions and Answers
Q27. Suggest 5 common solutions to software development problems.
1. Solid Requirements : The requirements of a software should be clear, complete, attainable and need
to be agreed by all the players of them.
2. Realistic Schedules : Adequate time for planning, designing, developing, testing, fixing the bugs and
re-testing, documentation should be allowed.
3. Adequate Testing : Start the testing immediately after one or more modules development. Re-test
after making changes.
4. Spend adequate time for testing, identifying and bug-fixing.
5. Adhere to initial requirements. Prepare to defend against changes.
6. Use rapid prototyping during design phase, so that the customers can find what to expect.
7. Communication: W alkthroughs and inspections are required when appropriate. Inculcate extensive
use of group communication tools, such as email, groupware.
Q28. What makes a good test engineer?
A good test engineer has a 'test to break' attitude, an ability to take the point of view of the customer, a
strong desire for quality, and an attention to detail. Tact and diplomacy are useful in maintaining a
cooperative relationship with developers, and an ability to communicate with both technical (developers)
and non-technical (customers, management) people is useful. Previous software development experience
can be helpful as it provides a deeper understanding of the software development process, gives the
tester an appreciation for the developers' point of view, and reduce the learning curve in automated test
tool programming. Judgment skills are needed to assess high-risk areas of an application on which to
focus testing efforts when time is limited.
Ph: +1-508-841-6144