1. Hybrid Powered Design Concept and Technical
LED Street Lighting System Speci cation
The design of the Hybrid Powered LED Street
Hybrid Powered This system is self contained and uses both solar
and wind energy sources.
Lighting System is a combination of energy
generators, e cient LED light, energy storage,
a micro-chip controller module, and a street pole.
LED Street Solar energy is not only free; it is silent, renewable These components are calculated and assembled
Lighting System and clean. Harnessing the wind is also free, clean
and renewable. Together they can generate zero
cost energy, without causing damaging emissions
together to provide a perfect system that
to the environment. Energy Generators:
A wind turbine and a solar panel are
The Hybrid Powered LED Street Lighting System the ultimate solution in any
2.0 meters diameter
is low maintenance and a bright street lighting weather condition.
solution. This system allows for installation
in remote areas, not connected to the hydro grid.
This system provides safety for travelers on public
roads, parking lots, and highways.
Wind Turbine Specs:
Bene ts of Hybrid Powered LED Street Lighting 1. Power: 300W
System: 2. Blade diameter: 2.0m
3. Rated rotor speed: 400rpm
1. Operates with Zero Energy Cost 4. Rated speed: 8mps
2. A self-su cient system 5. Rated power: 300W Global Green Sourcing Inc.
3. Minimum of 50,000 hours and up to 70,000 6. Max power: 400W 3228 Karley Crescent
hours life span 7. Output voltage: DC24V Coquitlam, BC V39 3E9
4. Shock and Vibration resistant 8. Start up wind speed: 10 km/h Canada
5. Low heat and no UV lighting system 9. Work speed: 10-90 km/h
6. Easy Installation 10. Security wind speed: 144 m/s phone #: 1-604-288-2172
7. Low maintenance cost 11. Height of guy-wire tower: 6m fax #: 1-604-637-0033
8. RoHS compliant 12. Weight: 35kg email: email@example.com
9. Suitable in any weather condition 13. Output controller system consists of a charge
controller and an inverter Call our toll free #: 1-866-401-9175
14. Supplies power for both battery and the or visit www.globalgreensourcing.com
LED light for more information
2. Solar Panel Specs E cient LED Light: Energy Storage (Battery): Street Pole:
Our LED lamp shell is made of tensile aluminum The street pole is the main frame to combine the
which is more e cient for thermal dissipation and system all together and become one solution.
much better than common die-cast aluminum
material. Depending on the height of the street pole, the
illumination di ers as shown below.
Light rear cooling ns have been carefully 1. Maintenance-free without rehydration
developed and researched which make the LED 2. Strong starting capability
operating temperature always less than 50 degrees 3. Operating temperature: -50C ~ 70C
Celsius, ensuring the LED light-emitting e ciency 4. Long life
and lifetime. 5. No free electrolyte, can be installed in any
6. Low Resistance
7. Stable charge-discharge electric current
1. A-grade monocrystalline solar panel 8. Low self-discharge
2. Light transmittance: 95% 9. Easy Installation
3. High conversion / e ciency rate 10. Voltage: 100AH /12V DC
4. High transmission rate *Battery requires environmental housing
5. Made with low iron tempered glass
6. Long life span Micro-chip Controller Module:
7. Easy installation
8. Peak Power (Pm): 90W
9. Peak Voltage (Vmp): 17.6V 1. Tensile aluminum housing has a smooth surface
10. Peak Current (Imp): 5.1A and graceful appearance
11. Open circuit voltage (Voc): 21.7V 2. Tempered glass cover, good transparency and Our LED Street Light has a special quadric optical
10. Short circuit current (Isc): 5.5A strength lens that casts the rays of every LED onto a
12. Temperature coe cient of Isc: -0.4%/C 3. Heat proof silicon gasket provides a good 1. Micro-computer intelligent controller rectangular area. It uses non-imaging optics to
13. Temperature coe cient of Voc: 0.1%/C sealing property 2. Automatic lighting and time control functions focus all the light into the area you want to
14. Solar Chip E ciency: 15%~17% 4. The lamp holder case is equipped with a lter, 3. Input Voltage: 10A/24V illuminate.
15. Electrical Speci cation: AM 1.5 25C ensuring the high output of the light ux and 4. Built-in photosensor for switching on and o
16. Working Temperature: -50C to 70C to prevent the attenuation of the re ection ratio when it is dark and bright respectively.
17. Module Size: 1200 x 540 x 30 mm 5. Power Factor: > 90% 5. Intelligently ignores short-term changes in
18. Weight: 8kg 6. Working Voltage: 24V/12V light. Due to the in uence of lighting or Summary:
19. Isolation Voltage: AC 2000V, DC 3000V 7. Color Rendering Index: > 80 short-term shelter.
20. Wind Resistance Performance: 200 km/h 8. High heat dissipation 6. Over-charge protection, over-discharge Our hybrid LED street lighting system is de nitely
21. Load Resistance: 200kg/m2 9. RoHS compliant protection a stand alone solution that uses solar and wind
22. Impact Resistance: Hailstone Resistance 10. Life span: > 50,000hrs 7. Temperature compensation function power (zero energy cost) and requires low
23. Service Life: More than 25 years 11. Power of LED: 75W / 24V DC 8. Output voltage stability maintenance. It is a self-su cient lighting system
24. Warranty: 5 years 12. Warranty: 2 years 9. Timing light sensitivity adjustable, anti-light that provides security and better visibility.
10. Prevents reverse battery and solar cell function