Se ha denunciado esta presentación.
Utilizamos tu perfil de LinkedIn y tus datos de actividad para personalizar los anuncios y mostrarte publicidad más relevante. Puedes cambiar tus preferencias de publicidad en cualquier momento.

Assembly of Tail stock

Assembly of Tail stock, Computer Aided Machine Drawing (CAMD) of VTU Syllabus prepared by Hareesha N Gowda, Asst. Prof, Dayananda Sagar College of Engg, Blore. Please write to hareeshang@gmail.com for suggestions and criticisms.

  • Inicia sesión para ver los comentarios

Assembly of Tail stock

  1. 1. Tutorial on Tails Stock Hareesha N G Dept of Aeronautical Engg Dayananda Sagar College of Engg Bangalore-78 Hareesha N Gowda, DSCE, 1 Blore-78
  2. 2. PART 1: BODYSTEP 1: ProtrusionSketch on YZ plane or right plane as shown in figSymmetric protrude distance 312 mm Hareesha N Gowda, DSCE, 2 Blore-78
  3. 3. STEP 2: CutoutSketch on XZ plane or front plane as shown in figcutout depth mm 150 mm Hareesha N Gowda, DSCE, 3 Blore-78
  4. 4. STEP 3: CutoutSketch on YZ plane or right plane as shown in figcutout depth up to next surface Hareesha N Gowda, DSCE, 4 Blore-78
  5. 5. STEP 4: CutoutSketch on YZ plane or right plane as shown in figcutout depth up to next surface Hareesha N Gowda, DSCE, 5 Blore-78
  6. 6. STEP 5: CutoutSketch on XZ plane or front plane as shown in figcutout depth through all Hareesha N Gowda, DSCE, 6 Blore-78
  7. 7. STEP 6: CutoutSketch on XZ plane or front plane as shown in figcutout depth through all Hareesha N Gowda, DSCE, 7 Blore-78
  8. 8. STEP 7: Revolved ProtrusionSketch on XZ plane or front plane as shown in figrevolve protrusion angle 3600 Hareesha N Gowda, DSCE, 8 Blore-78
  9. 9. STEP 8: ProtrusionSketch on XY plane or Top plane as shown in figSymmetric protrusion distance 70 mm Hareesha N Gowda, DSCE, 9 Blore-78
  10. 10. STEP 9: CutoutSketch on YZ plane or front plane as shown in figcutout depth 70 mm Hareesha N Gowda, DSCE, 10 Blore-78
  11. 11. STEP 10: HoleHole 1 of diameter 38 mm through allHole 2 of diameter 22 mm depth 35 mmHole 3 of diameter 8 mm, 4 holes depth 15 mm Hareesha N Gowda, DSCE, 11 Blore-78
  12. 12. PART 3:BARRELSketch on XZ plane or front plane as shown in figUse revolve protrusion angle 360ocutout dimension 4.5 x 3 mm length 245 mm Hareesha N Gowda, DSCE, 12 Blore-78
  13. 13. PART 4:SCREW SPINDLESketch on XZ plane or front plane as shown in figUse revolve protrusion angle 360ocut out 4.5 x2.25 and 28 mm length Hareesha N Gowda, DSCE, 13 Blore-78
  14. 14. PART13 handleSketch on XZ plane or front plane as shown in figUse revolve protrusion angle 360osketch on XY or top plane as shownSymmetric protrusion distance 40 mm Hareesha N Gowda, DSCE, 14 Blore-78
  15. 15. PART19 CENTRESketch on XZ plane or front plane as shown in figUse revolve protrusion angle 360o Hareesha N Gowda, DSCE, 15 Blore-78
  16. 16. PART 8 HAND WHEELStep 1:Sketch on XZ plane or front plane as shown in figUse revolve protrusion angle 360o Hareesha N Gowda, DSCE, 16 Blore-78
  17. 17. PART 8 HAND WHEELStep 2:Sketch on XZ plane or front plane as shown in figUse revolve protrusion angle 360o Hareesha N Gowda, DSCE, 17 Blore-78
  18. 18. PART 8 HAND WHEELStep 3:Sketch on YZ plane or right plane as shown in figUse lofted protrusion Hareesha N Gowda, DSCE, 18 Blore-78
  19. 19. PART 8 HAND WHEELStep 4:circular pattern according to the requirement Hareesha N Gowda, DSCE, 19 Blore-78

×