2. •Specifications of OTC / Daihen robot control are:
Serial - L9672YZ5661410, Model - AXCAN1-U000
Specifications of OTC/Daihen digital inverter are:
Serial - P10500YDK127871007, Model - DP500
Robot Reach: 55.5"
ROBOT SPECIFICATIONS:
Arm Revolving J1: +/- 170°
Lower Arm J2: -155° to +90°
Upper Arm J3: -170° to +180°
Wrist Swing J4: +/- 155°
Wrist Bending J5: -45° to +225°
3. Wrist Swing J6: +/- 205°
Max. Velocity Arm Revolving J2: 2.62 RAD/S (150°/S)
Max. Velocity Lower Arm J2: 2.79 RAD/S (160°/S)
Max. Velocity Upper Arm J3: 2.97 RAD/S (170°/S)
Max. Velocity Wrist Swing J4: 5.93 RAD/S (340°/S)
Max. Velocity Wrist Bending J5: 5.93 RAD/S (340°/S)
Max. Velocity Wrist Twist J6: 9.08 RAD/S (520°/S)
Robot has 12' of Travel on Arc worker Robot Track Via AC Servo
Rack & Pinion - Drive on Linear Guide Ways
Robot Servo Motor with Brake & RV Gearbox, 1 Arc Min. Backlash
ARCWORKER HSTS HEADSTOCK & TAILSTOCK POSITIONER:
Headstock is AC Servo Driven Continuous Torque 32,745 In.-Lbs. at 10.8 RPM
4. Distance Between the Blanchard Ground 22" Dia. Face Plates: 176" Max. Swing: 60“
Weight Capacity: 5,456 Lbs. at 6" Offset
Rotation: 1420° Max. with Infinite Position Selection
Control & Programming is Thru the Robot Teach Pendant
Weld Ground Capacity: 500 Amps at 100% Duty Cycle
Welding Grounds at the Headstock & Tailstock
5716308 New 8/2007 Model - AXMV4AP1-NEFU
EQUIPPED WITH
OTC/Daihen Wire Feeder, Model - AF-4001
System Control Teach Pendant
Miller Coolmate 4 Chiller
Tough gun Torch Tender
5. (2) Regulator Flow Meters
Full Set of Manuals & CD
Controlled Magnetics 18 KVA Transformer
The Base the Robot Travels on is attached to the Positioner. Base with (2) 17" Long Connecting A
Positioner: 18' L x 38" W x 48" H
Robot on Base: 200" L x 41" W x 102" H
Overall Size of Rack with Robot Control, Digital Inverter, 18 KVA Transformer
& Disconnects: 87" L x 28" W x 62" H
NOTE from Himes Machinery USA:
There is NO Safety Cage with this System.
Article Source - http://www.himesmachinery.com/welding-cells.html
6. (2) Regulator Flow Meters
Full Set of Manuals & CD
Controlled Magnetics 18 KVA Transformer
The Base the Robot Travels on is attached to the Positioner. Base with (2) 17" Long Connecting A
Positioner: 18' L x 38" W x 48" H
Robot on Base: 200" L x 41" W x 102" H
Overall Size of Rack with Robot Control, Digital Inverter, 18 KVA Transformer
& Disconnects: 87" L x 28" W x 62" H
NOTE from Himes Machinery USA:
There is NO Safety Cage with this System.
Article Source - http://www.himesmachinery.com/welding-cells.html