HYC Co., Ltd, 2019 new products is including LC push-pull connector, lc polarity revisable uniboot connector,lc duplex sll connector, lc internal shutter adapter,mpo connector,mpo adapter,1U/2U/4U rack mount enclosure for data center solutions, plc splitter, aawg module, awg cwdm4 designed for 40G/100G active optical module, wdm lgx module, CCWDM module, Mini WDM, AOC series, SC optical reflector, FTTH box, MEMS optical switch, MCS module, and so on. Get more: http://www.hyc-system.com

1. www.hyc-system.com
HYC
NEW PRODUCTS
MANUAL

2. ■ A push-pull design ensure easier release from the HD environment;
■ Switch connector to change polarity;
■ IEC 61754-20 and GR-326-Core compliant;
■ RoHS/REACH and UL94-V0 inflammability grade compliant;
■ Customized logo is optional;
■ Unique and patented design;
■ A half-surround tab end avoid the cable ganged each other.
PUSH-PULL
CONNECTOR
PUSH-PULL
CONNECTORLCLC
STEP1 STRIP THE
BOOT AND THE
OUTER HOUSING;
STEP2 SWITCH THE
POLARITY;
STEP3 CLOSE THE
CONNECTOR;
Application
environment:
No gap here
HIGH
DENSITY
IN PANEL
Features:
HDHD
most
compact
LCLICENSED
01—LC HD PUSH-PULL CONNECTOR

3. Features:
UNIBOOT CONNECTORUNIBOOT CONNECTORLCLC
■ Compact design ensure easier release from
adapter;
■ Switch connector to change polarity;
■ PC/APC available;
■ Applies to 1.2~2.5mm cable;
■ Various colors available;
■ A customized logo is optional;
■ IEC 61754-20 and GR-326-Core compliant;
■ RoHS/REACH and UL94-V0 inflammability
grade compliant.
STEP1 STRIP THE
BOOT AND THE
OUTER HOUSING;
STEP2 REVISE THE
POLARITY;
STEP3 RELOCATE
THE BOOT AND THE
OUTER HOUSING;
PolarityRevisablePolarityRevisable
Various colors
available
A customized logo
is optional
LCLICENSED
LC UNIBOOT CONNECTOR—02

4. 1.4mm
10.1mm
Longer clip,
more convenient
to release;
Lower clip，
higher density
on panel;
LCLC
LCLICENSED
STEP3
STEP1
STEP2
CONNECTORCONNECTOR
DUPLEXDUPLEX SLLSLL
Features:
■ Switch connector to change polarity;
■ SM/MM, PC/APC available;
■ A customized logo is optional;
■ IEC61754-20 and GR326 compliant;
■ RoHS and UL94-V0 inflammability grade compliant;
0.9MM STYLE 2.0MM/3.0MM SHORT BOOT STYLE 2.0MM/3.0MM REGULAR BOOT STYLE 2.0MM/3.0MM BENDABLE BOOT STYLE
Relocate the clip
Locate the connector
Take out the clip,
switch the connector
03—LC DUPLEX SLL CONNECTOR
Polarity Switchable, Longer and Lower Clip

5. LC INTERNAL SHUTTER ADAPTER—04
internalshutterinternalshutter
LCLC
DUST AND
LASER PROOF
DUST AND
LASER PROOF
Ferrule end face doesn’t touch shutter plate:Ferrule end face doesn’t touch shutter plate:
■ Duplex and quad available;
■ Dual shutter and single shutter style are available;
■ Various colors available;
■ A patented spring ensures it stable fixed in panel;
■ A real one piece structure design;
■ Perfectly fit 1/2/4U cassette;
■ IEC 61754-20 compliant;
■ RoHS/REACH and UL94-V0 inflammability grade
compliant.
Position-1 Position-2 Position-3
Features:
Various colors
available
ADAPTERADAPTER
Dual shutter Single shutter

6. MPOMPO CONNECTORCONNECTOR
Features:
RIBBON FIBER AND ROUND CABLE STYLERIBBON FIBER AND ROUND CABLE STYLERIBBON FIBER AND ROUND CABLE STYLERIBBON FIBER AND ROUND CABLE STYLE
■ 12C,16C,24C,32C ribbon fiber and round
cable(2.6~3.6mm) style available;
■ A patented Push-Pull tab is optional;
■ PC/APC available;
■ Regular spring and high-force spring available;
■ A customized logo is optional;
■ IEC 61754-7 and GR-1435 compliant;
■ RoHS/REACH and UL94-V0 inflammability grade
compliant.
Various colors
available
A patented push-pull
tab is optional
Regular
spring
High-force
spring
A customized logo is
optional
ribbon fiber
16F,32F available
round cable
2.6~3.6mm
05 —MPO CONNECTOR
A patented
Push-Pull
tab

7. MPOMPO ADAPTERADAPTERA REAL ONE PIECE COMPACT DESIGNA REAL ONE PIECE COMPACT DESIGNA REAL ONE PIECE COMPACT DESIGNA REAL ONE PIECE COMPACT DESIGN
Without flange With flange
■ SC footprint design;
■ A patented spring ensures it stable fixed in panel;
■ A customized logo is optional;
■ IEC 61754-7 and GR-1435 compliant;
■ RoHS/REACH and UL94-V0 inflammability grade
compliant.
Features:
Various colors
available
Key up to
Key up
Key up to
Key down
vs
Integrated Welded type
MPO ADAPTER—06

8. SolutionsSolutions
Data CenterData Center
HDHD
Features:
■ 19〃rack mount,2 cassettes each layer;
■ 6Pcs plastic Independent trays for 1U 144C LC;
■ Label space available, for visible connection;
■ Compliance with EIA / TIA568C;
■ Easy capacity expansion and operation;
■ Light weight design(Aluminum);
■ RoHS compliant.
uniboot connector
Inner shutter
adapter
MPO connector
Polarity reversible
24F cassette with duplex adapter 24F cassette with quad adapter
1U solution
07—HD DATA CENTER SOLUTIONS

9. SolutionsSolutions
Data CenterData Center
HDHD
4U Solution
2U Solution
Features:
■ 19〃rack mount, 2 cassettes each layer;
■ 12Pcs plastic Independent cassettes for 2U 288C LC;
■ Label space available, for visible connection;
■ Compliance with EIA / TIA568C;
■ Easy capacity expansion and operation;
■ Light weight design (Aluminum);
■ RoHS compliant.
Features:
■ 19〃rack mount, 2 cassettes each layer;
■ 24Pcs plastic independent cassettes for 4U 576C LC;
■ Label space available, for visible connection;
■ Compliance with EIA/TIA568C;
■ Easy capacity expansion and operation;
■ Light weight design(aluminum);
■ RoHS compliant.
HD DATA CENTER SOLUTIONS—08

10. SplitterSplitterPLCPLC
09—PLC SPLITTER
Features:
■ Universal size for 1x2~1x64&2x2-2x64 PLC;
■ HYC unique compact structure design;
■ Good uniformity and high reliability;
■ Universal for PLC splitter and WDM.
Size
PLC
100x45x10mm
1x2, 1x4, 1x8, 1x161/2x32, 1/2x64
WDM 8ch, 16ch
120x80x10mm
PLC Splitter
■ HYC own production for fiber array;
■ Telcordia GR-1209 & GR-1221 qualified;
■ Automatic alignment and test system;
■ Testing wavelength:1270/1310/1490/1550/1625nm.
GR-1209 GR-1221
Dimension:

11. SplitterSplitterPLCPLC
PLC SPLITTER—10
Features:
Features:
■ Low insertion loss, low PDL;
■ 19” standard installation, compatible for ETSI installation type;
■ Module design, slideway tray structure, easy to installation;
■ Easy to maintain, high reliability;
■ Compatible for 1x2～2x64 PLC splitter.
■ Low insertion loss, low PDL;
■ Good channel to channel uniformity;
■ Wide operating wavelength from 1260-1650nm;
■ Compact design, robust casing;
■ Easy to installation, disassemble and maintain.
RACK TYPERACK TYPERACK TYPERACK TYPE
LGX BOXLGX BOXLGX BOXLGX BOX

12. MODULEMODULE
11—AAWG MODULE
AAWGAAWG
Features:
■ Pure passive module;
■ Low insertion loss;
■ Low crosstalk;
■ Planar waveguide technology;
■ Telcordia GR-1209 & GR-1221 qualified.
AAWG Description:
HYC's athermal AWG module is based on arrayed waveguide grating technology, which does not
require power and temperature generation equipment; it belongs to pure passive module; based on
mature technology, we can provide 32-channel, 40-channel, 48-channel athermal AWG module
encapsulated with small metal box or 19-inch rack; at the same time, these modules can also have
power monitoring terminal port and other band expansion port.
GR-1209 GR-1221

13. AWG CWDM4AWG CWDM4
AWG CWDM4—12
Features:AWG CWDM4 Description:
DESIGNED FOR 40G/100G ACTIVE OPTICAL MODULEDESIGNED FOR 40G/100G ACTIVE OPTICAL MODULEDESIGNED FOR 40G/100G ACTIVE OPTICAL MODULEDESIGNED FOR 40G/100G ACTIVE OPTICAL MODULE
The AWG cwdm4 module of HYC is fabricated
based on silicon chip technology. It has compact
structure and high reliability. It is widely used
for combining and dividing optical signals in 40G
or 100G active optical modules.
■ Low insertion loss;
■ Good uniformity;
■ Planar waveguide technology;
■ Compact size;
■ High reliability and stability;
■ Telcordia GR-1209 & GR-1221 qualified.
MUX
AWG CWDM4 DEMUX
AWG CWDM4 MUX
DEMUX

14. WDM LGXWDM LGX
13—WDM LGX
Features:
Features:
WDM device Description:
■ Low insertion loss;
■ Epoxy-Free optical path;
■ Thin film filter technology;
■ Barcode management system;
■ High reliability and stability;
■ Wide operating temperature range;
■ 2CH, 4CH, 8CH, 16CH, 18CH for CWDM;
■ 2CH, 4CH, 8CH, 16CH, 32CH, 40CH for DWDM.
MODULEMODULE
HYC's WDM products include CWDM, DWDM, FWDM and so on, which provide optical signal combi
nation access or wavelength division demodulation for metropolitan area network, access network,
CATV and PON network. These devices can be designed in small size, with stable parameters and are
easy to fabricate modules with compact size.
■ Low insertion loss;
■ Epoxy-Free optical path;
■ Thin film filter technology;
■ Barcode management system;
■ High reliability and stability;
■ Wide operating temperature range.

15. CCWDM MOUDLE—14
■ Epoxy free in optical path;
■ Wide operating temperature(-40°~85°);
■ Low insertion loss(IL<=1.7dB @8-CH);
■ High extensibility(Available 4/8 channel or more);
■ Wide operating wavelength;
■ High isolation.
Features:
MODULEMODULECCWDMCCWDM
COMPACT FREE-SPACE STRUCTURECOMPACT FREE-SPACE STRUCTURECOMPACT FREE-SPACE STRUCTURECOMPACT FREE-SPACE STRUCTURE
Much Smaller Package Size
Low Insertion Loss
Normal CWDM vs CCWDM Module
Normal CWDM
80×60×12mm
CCWDM Module
50×27×7.7mmVSVS

16. 15—MINI WDM
MINI WDMMINI WDM
Mini WDM device size:
Ø3.2 x L30mm Ø3.0 x L30mm
Ø2.6 x L25mm Ø2.2 x L25mm
■ Barcode management system for good traceability;
■ Telcordia GR1209&1221 qualified;
■ Low insertion loss and better uniformity;
■ Automatic alignment & yokogawa spectrum analyzer system;
■ Miniaturized devices achieve more compact solution.
GR-1209 GR-1221
PCT168
HI-POWER
500mw
Features:
Standard WDM device size:
Ø4.0 x L30mm
VSVS
Mini vs Standard WDM
Barcode Tracking
System

17. AOC SERIES—16
MT-FA Mini Patch Cord
AOCAOC
MT-MT Patch cord
■ Cross or parallel connecting;
■ 40G/100G transmission speed;
■ Standard or low loss can be optional;
■ 8 cores or 12 cores can be optional;
■ GR-1435-Core compliance;
■ The length is specified by customer;
■ Ribbon fiber or separated fiber conve-
nient for inside connection.
SeriesSeries
■ Lighter weight;
■ Smaller size;
■ Smaller bend radius;
■ Comply with RoHS.
AOC Patch cord
MT-MT Mini Patch Cord
MT-MT AOC Patch Cord
LC-LC AOC Patch Cord

18. 17—REFLECTOR
Features:
REFLECTORREFLECTORREFLECTOR FOR MONITORING FTTX SYSTEMREFLECTOR FOR MONITORING FTTX SYSTEMREFLECTOR FOR MONITORING FTTX SYSTEMREFLECTOR FOR MONITORING FTTX SYSTEM
Low
insertion
loss
SC OPTIC FIBERSC OPTIC FIBER
■ Low insertion loss and high reflectance;
■ Reflect wavelengths of 1645nm to 1655nm;
■ Ideal optical termination for link monitoring of FTTx networks;
■ Point to point (PTP) and point to multipoint (PTMP) networks.

19. FTTH BOX—18
FTTHBOXFTTHBOX
Features:
Application:
■ Wall installation, space saving, easy to installation;
■ Light weight, high intensity, good crashworthiness and dustproof;
■ Clear management;
■ Ufficient space for fiber bending.
■ FTTH, FTTO, FTTD;
■ Telecommunication networks;
■ CATV and LAN network;
■ Active device termination;
■ Data communication.
Size:150x110x30mm
Fiber Capacity: 4cores
Size:106x80x24mm
Fiber Capacity: 2cores

20. Application:
MEMSMEMSOPTICAL NETWORK MONITORING AND SWITCHINGOPTICAL NETWORK MONITORING AND SWITCHINGOPTICAL NETWORK MONITORING AND SWITCHINGOPTICAL NETWORK MONITORING AND SWITCHING
OpticalSwitchOpticalSwitch
MEMS Optical Switch is based on micro-electro-mechanical system
(MEMS) technology to control and switch the optical path. It is
widely used in MCS, OXC, iODF,OLM, OTDR, optical fiber sensing
and so on.
Compact
structure
Fastswitching
(≤30ms)
Highstability
&reliability
Availablein
any1xN
Canbeintegrated
withWDM
PLCorPD
GR-1073
Loss Repeatability ≤0.1dB
Crosstalk ≥50dB
Switching speed ≤30ms
Dimension φ5.5×42mm
Parameters:
Dimension: (L)60×(W)35×(H)15mm
19—MEMS OPTICAL SWITCH

21. BASED ON PLC OPTICAL SPLITTER
AND MEMS OPTICAL SWITCH
BASED ON PLC OPTICAL SPLITTER
AND MEMS OPTICAL SWITCH
BASED ON PLC OPTICAL SPLITTER
AND MEMS OPTICAL SWITCH
BASED ON PLC OPTICAL SPLITTER
AND MEMS OPTICAL SWITCH
MulticastSwitchMulticastSwitchMCSMCS
Features:
■ Low insertion loss;
■ Low power consumption;
■ Configuration flexibility, wavelength
independent;
■ Signal switching or blocking.
GR-1073
Based on PLC splitter and MEMS optical switch technology, MCS is
designed for next generation of ROADM system. Each unit is com-
posed of M Splitters and N MEMS OSWs. Help to route optical direc-
tion from N add(or drop) to M ports.
Parameters 8x12 8x16
Insertion Loss (dB) ≤15 ≤16
Loss Uniformity(dB) ≤1.5 ≤1.7
Power Supply 5V/1.5A 5V/1.5A
Switching speed(ms) ≤300 ≤300
Dimension 220×140×20.5 mm
Dimension:
Application:
MCS MULTICAST SWITCH—20

22. HYCCO.,LTD
Scan for more product information
Tel：+86-763-3319222
Fax：+86-763-3637771
Email：sales@hyc-system.com
Web：www.hyc-system.com
Address:No.1,LongzhuRd,Longhua
Avenue,ZhouxinStreet,QingchengDistrict,
QingyuanCity,Guangdong,China
HYCCO.,LTD
(ShenzhenBranch)
Tel：+86-755-81489797
Fax：+86-755-81489758
Email：sales@hyc-system.com
Web：www.hyc-system.com
No. 1501-1502, Fl.15, Jia'anda Mansion,
Huafan Road, Dalang Str. Longhua District,
Shenzhen, Guangdong, China