More than Just Lines on a Map: Best Practices for U.S Bike Routes
Design and fabrication of abbtasive belt grinding
1. DESIGN AND FABRICATION OF ABBTASIVE BELT GRINDING
ATTACHMENT FOR LATHE
ABSTRACT:
Our project Design and Fabrication of abrasive belt grinding attachment for lathe is used to
polishing the circumference of large diameter drums (say 250 mm) used in textile industry.
In order to prove lathe is a versatile machine this operation is performed in lathe itself
This attachment having a main shaft and lay shaft. Abrasive belt rolls over the main shaft
and lay shaft .this main shaft gets the power from the motor to run the belt. Here this
arrangement is totally fixed over the compound slide of the late after removing tool post.
Now the drum (job) is hold between the centers and belt is belt is feed against the job at
2000rpm. So glass finished will obtain over the job
.
ECWAY TECHNOLOGIES
IEEE PROJECTS & SOFTWARE DEVELOPMENTS
OUR OFFICES @ CHENNAI / TRICHY / KARUR / ERODE / MADURAI / SALEM / COIMBATORE
BANGALORE / HYDRABAD
CELL: 9894917187 | 875487 1111/2222/3333 | 8754872111 / 3111 / 4111 / 5111 / 6111
Visit: www.ecwayprojects.com Mail to: ecwaytechnologies@gmail.com
2. WORKING DIAGRAM:
DESIGN AND FABRICATION OF ABRASIVE BELT ATTACHMENT FOR LATHE
LATHE CHUCK
CYLINDRICAL JOB
LATHE CARRIAGE
ABRASIVE BELT ATTACHMENT
TAIL STOCK
HIGH SPEED MOTOR
V-BELT DRIVE
DEPTH OF CUT
FEED
ABBRASIVE BELT WITH ROLLER
Key words-Design, Fabrication, working inspection, Report creating