It is possible to eliminate more than a kilowatt of energy consumption just by moving to LED. This important case study shines new light on the 200 year old problem of inefficient lighting solutions. The use of legacy lighting no longer adds up. A shift to next generation LED lighting is the best way to reduce energy consumption and costs, extend lifecycles, and give your senses a break from flicker, noise, and dullness. KILL-A-WATT and give something back to the environment that you live in today.
Strategies for Landing an Oracle DBA Job as a Fresher
Grid Lite Case Study
1. CASE STUDY
ALL LED MODULAR FACILITY ELIMINATES 1,231 WATTS
EXTERIOR WALLPACKS
Up to 50,000 hour - lifetime
The client chose a pair of AC
powered 50,000 hour LED , 895
ALL LED MODULAR FACILITY
Lumen, 5,487 Kelvin wallpacks
IP UtiliNET Energy Services has installed an all LED solution for a Touax provided modular facility. The lighting
that consume only 14 Watts each
solution consists of; Grid Lites with dimmers as fluorescent alternatives, exit signs, outdoor wall packs, and A19
versus the typical 1,000 hour,
replacements for traditional incandescent lamps. The legacy fluorescent, incandescent, and halogen l lighting
100W incandescent lamps. The
solution offered an energy consuming 1955 Watts, no dimming capability, and lifetimes of up to 6,000 hours
wallpacks incorporate dusk to
(fluorescent). The installed IP UtiliNET Energy Services ALL LED solution delivers 724 Watts of total power
dawn sensors.
consumption leading to a net elimination of 1,231 Watts and an expected solution lifetime of 50,000 hours. The
LED EXIT LAMPS implementation achieves symmetry in design, long life, low maintenance, reduced operating cost, and simplified
Traditional Exit lamps are power installation with the IP UtiliNET Grid Lite & Panel System. The energy efficient lampless grid-lite panels are
hungry 24 Watt beasts that use installed as mechanically dimmable, and can also be electronically dimmable.
limited lifetime Lead Acid
WIDE RANGE OF CAPABILITIES
Batteries for emergency power.
This AC based modular facility demonstrates the range of LED solutions. The bathroom uses a single A19 lamp in
Our LED solution uses only 4
a traditional incandescent screw in fixture, the offices use the 2X2 Grid-Lite panels and have a wall mounted
Watts and 90 minutes of lifetime
dimmer knob. The exit lamps are all LED, and the ceiling lamps in the main room are switch controlled Grid-Lite
via small lithium batteries.
panels.
Grid-Lite 2x2
GRID LITE
GRID-LITE SPECIFICATIONS
Grid-Lite is an advanced 24 Volt
4100 Kelvin per panel ( 3200 Available)
DC based 2X2 lampless LED
CRI; 80
panel that can be installed in a
Lumens per watt; >70
ceiling grid, on a wall, or in a
Weight; 5.5 lbs
custom enclosure. Choose from
120/277 VAC Auto Sensing Power Supply
available 4100 Kelvin or warm
24 VDC, 1.7A Grid Lite Power Requirement D E
3400 Kelvin neutral color and
ETL Safety Tested and Listed
realize the savings as each panel
Operating Environment; For dry or damp
consumes only 45 Watts.
locations, Temperature – 0 to 40 degrees C,
Humidity – 10% to 90% non-condensing A: LED Wallpacks
A19 LAMP
Lifetime; 50,000 hours B: Office 1
C: Office 2
The bathroom vent fan
Dimmer; Remote, Dial, Wireless, Software B C D: Work Area
E: Exit Lamps
A
incorporated a 60W incandescent
Up to 30 lamps on a single power supply
lamp which was replaced with a
Made in USA, Patent Pending
16 Watt, 1100 Lumen, 3000
Kelvin bright white LED lamp.
The evolution to advanced LED lighting is not a question of when it will be
IP UtiliNET available, it is now a question of which facility to do next and what components to
6825 Shiloh Road East, use. Traditional AC fluorescent troffers cost more to install, operate, maintain, and
STE B-7 radiate heat causing your cooling systems to work harder.
Alpharetta, GA 30005
P (877) 901-6947
www.iputilinet.com info@iputilinet.com