This document summarizes the Deck Master decking system, which provides a concealed fixing system for decks using pre-grooved and end-matched deck boards. Key features include secret fixing clips that are attached using a pneumatic tool, avoiding nails popping up. The system allows for faster installation, less waste, and superior appearance compared to traditional decking. It provides advantages like increased deck life without splitting or rot around fasteners.
1. Secret Fixed Decking / Pre Oiled P.R. Decking
Hardwood Cladding / DPR Hardwood
Machining / Oiling / Priming
THE ULTIMATE DECKING SYSTEM
2. Who Is Deck Master?
• Deck Master is an Australian Company that Produces
Secret Fix Grooved & End Matched Decking, Pre Oiled
Pencil Round Decking, Hardwood Cladding / Lining
Boards & DPR Hardwood. We also provide services
such as custom machining, oiling and priming. We
distribute to Timber & Hardware Merchants
throughout Australia. All imported hardwoods have
either FSC or Chain of Custody Certification.
• Deck Master evolved after the directors tirelessly
searched the world to solve the problems related to
the short lengths contained within Australian
Hardwood Decking.
3. What do we do?
Concealed Fix Decking
Grooved & End Matched
Resort Style Decking
Pre Oiled 110 x 22 Pencil Round
4. What else do we do?
Hardwood End Matched
Chamfer & V/J Cladding
DPR F17 Hardwood
5. Yes there is more?
Primed H3 LVL’s
Don’t Void your Warranty!
Custom Machining and Oiling
6. What Is The Deck Master
Decking System?
• Secret Fixed Pre Oiled Decking System
• Gun Fired Screws Attaching Stainless Steel Clip
• Pre Grooved & End Matched Decking Boards
• DeckBone End Matched Joiners
• Weather Strip Joist Protection
7. Advantages
• Secret Fixed
No More nails popping
• Safer Surface
No More Trip Hazards
• Increased Deck Life
No More Deck Splitting & Rotting Around Fasteners
Stores The Carbon For A Longer Period Of Time
• End Matched Deck Boards
Join Decking Boards Off the Joist – Saves Time
8. More Advantages
• Less Waste – Save Up To 70% Waste
Saves Money & Reduces Strain On Our Valuable
Resources
• 62% Faster Installation Than Screw Gun
(Not Including Pre Drilling Time)
Please View The Time Saving Video On Our Website
• Superior Finish
More Appealing Appearance
10. How Does The System Work?
• Firstly the rubber Weather
Strip Joist protection is
installed over the joists.
• 3mm Riser Protects the
Underside of the Deck
11. Installing The First Board
• Fasten the Stainless Steel Top Fix Clips
• Slide the Pre Grooved Board into position
12. Fastening The TCG Clip # 1
• The 304 Stainless
Steel TCG Clip is
Inserted onto the
end of the Tiger
Claw Gun.
13. Fastening The TCG Clip # 2
• The Gun is
positioned into the
grooved board
allowing the hooked
tabs to engage the
top of the groove.
14. Fastening The TCG Clip # 3
• The Gun Fires a
Pneumatic Screw
fastening the TCG
Clip to the Joist
without Penetrating
the Decking Board.
15. Butt Joining The Decking
• DeckBone Joiners Designed for Joining the
Decking Boards OFF the Joist!
• Fast Installation
• Precise Factory Cut End Matched Joint
• Undercut For a Tight Fit on the Top Surface
16. Fastening the last board
•
•
•
•
End / Side Fix Clips
Repairing & Replacing Boards
304 Stainless Steel Screws
Black Enamel Square Drive Heads
17. Trim Top Screws
• Providing other fastening options for the first
and last Board. Also used for fascia boards.
• 304 Stainless Steel Screws
• Coloured Square Drive Heads
18. The Pre Grooved Deck Board
• Pencil Round Decking With Angled Groove To Disperse Moisture
• Available in Kiln Dried Hardwood and Composite Decking
19. Pre Oiled Boards
• Pre Oiled Deck / Cladding Boards are preferable
• It is advised to pre oil all surfaces of any timber deck
board or cladding board prior to installation
• Refer Timber Queensland External Timber Use and
Finishes Presentation November 2013
• Feast Watson Tradition Decking Oil is used to keep the
boards dimensionally stable and to prevent weathering
• A final top coat with either an oil based or water based
product is required after acclimatization
• A grey look can also be achieved if required
20. The TCG Clip Installed
304 Stainless Steel Clip *25 Year Warranty*
22. Clip Function
• Please Note the Hooked Tabs engaging the groove
This ensures that the board gaps will remain
consistent as the boards are held back to one side
managing boards that naturally expand and contract
• Also Note the Gap being set by the Gap Tab
This tab sets gap between the deck boards perfectly
every time
23. The TCG150 Clip
A bearing load applied across a decking board (14.5 x 5.5 inches - area of a single
board on 16” ctr. joists) can demonstrate what natural forces the fastener is
capable of withstanding. The TCG150 fasteners are calculated to withstand a
load of 240.2 lbf for that area. A category 5 hurricane for this same area is
calculated to exhibit a force of 157.4 lbf. A category 5 hurricane would require
more than 80 lbf in addition to its force in order to cause failure in the fastener.
Upheaval Load Comparisons
TCG150 Fastener Stress Test
24. Fasteners - Scrails
• Scrails are a Screw / Nail that are fired by the
Tiger Claw Gun through the TCG Clip into your
joist at a skewed angle for added strength.
• The Scrail has a Phillips Head for any needed
adjustments or removal.
• Fascoat provides excellent durability.
25. • Fighting Gravity
• Stronger & Faster
• Four 75mm Scrails
• Lift this 1500kg Car
26. The DeckBone
•
•
•
•
•
Strong and Durable
Nylon Fibreglass
UV Stabilized
Ribbed Air Flow Design
500kg + Load Capacity
450mm Mid Span
28. Router Slot Cutter
• Slot ends that have been cut on an angle
• Slot boards that aren’t pre grooved
• Slot boards that have been ripped down
29. Price Comparison Chart
• Figures Below are based on a average 35M2 Deck
Calculations allow for 90mm Merbau Decking with fasteners spaced @450mm
Centres. Labour savings are only calculated at a conservative 50%. (Oct 2011)
30. Pricing Comparison Chart
• Deck Systems Comparisons / M2
With The Deck Master System you can create a better looking, longer lasting and
safer deck at an affordable price.