Se ha denunciado esta presentación.
Utilizamos tu perfil de LinkedIn y tus datos de actividad para personalizar los anuncios y mostrarte publicidad más relevante. Puedes cambiar tus preferencias de publicidad en cualquier momento.

Four stroke gas engines

49 visualizaciones

Publicado el

its used to automotive engine

Publicado en: Motor
  • Sé el primero en comentar

  • Sé el primero en recomendar esto

Four stroke gas engines

  1. 1. DEPARTMENT OF MECHANICAL ENGINEERINGDEPARTMENT OF MECHANICAL ENGINEERING MUTHAYAMMAL ENGINEERINGMUTHAYAMMAL ENGINEERING COLLEGE,RASIPURAM.COLLEGE,RASIPURAM. Presented byPresented by A.KALAIYARASANA.KALAIYARASAN Assistant Professor ,MEC –RasipuramAssistant Professor ,MEC –Rasipuram
  2. 2. Four Stroke Gas EnginesFour Stroke Gas Engines The four strokes of a internal combustion engine are: •Intake •Compression •Power •Exhaust Each cycle requires two revolutions of the crankshaft (720˚ rotation), and one revolution of the camshaft to complete (360˚ rotation). Each stroke = 180˚ of crankshaft revolution.
  3. 3. Intake StrokeIntake Stroke First Stroke The piston moves down the cylinder from TDC (Top Dead Center) to BDC (Bottom Dead Center). This movement of piston causes low air pressure in the cylinder (vacuum) Mixture of Air and Fuel in the ratio of 14.7 : 1 (air : fuel) is drawn into the cylinder. Intake valve stays open and the Exhaust valve stays closed during this stroke.
  4. 4. Compression strokeCompression stroke Second stroke The piston moves from BDC to TDC Intake and exhaust valves stay closed Air and fuel mixture is compressed 8:1 to 12:1 The pressure in the cylinder is raised
  5. 5. Power strokePower stroke Third stroke At the end of compression stroke the sparkplug fires, igniting the air/fuel mixture. Both the valves stay closed in this stroke. The expanding gases from the combustion in the cylinder (with no escape) push the piston down. The piston travels from TDC to BDC.
  6. 6. Exhaust strokeExhaust stroke Fourth and last stroke The momentum created by the Counter-weights on the crankshaft, move the piston from BDC to TDC. The exhaust valve opens and the burned gases escape into the exhaust system. Intake valve remains closed.
  7. 7. Four strokesFour strokes All four strokes
  8. 8. Four Cylinder EngineFour Cylinder Engine
  9. 9. Valve TimingValve Timing The ratio of cam to crank sprocket is 2:1 For every two revolutions of Crankshaft, the Camshaft turns once. Belt driven Chain driven Gear driven
  10. 10. CarburetorCarburetor The job of the carburetor is to accurately meter extremely tiny quantities of fuel and mix it with the air entering the engine, so that the engine runs properly. It works on the principle of High and low pressure High and low pressure is created with the help of Venture
  11. 11. Ignition systemIgnition system Provides high voltage surges – as high as 47,000 volts to the spark plug Parts • permanent magnet. • armature assembly. • breaker points. • condenser. • spark plug.
  12. 12. LubricationLubrication In the engine, dippers on the connecting-rod bearing caps enter the oil pan with each crankshaft revolution to produce the oil splash. A passage is drilled in each connecting rod from the dipper to the bearing to ensure lubrication.(used only on 4-stroke small engines)
  13. 13. CoolingCooling Air cooled Fins are used to dissipate heat Liquid cooled Coolant is used to dissipate heat.

×