Se ha denunciado esta presentación.
Utilizamos tu perfil de LinkedIn y tus datos de actividad para personalizar los anuncios y mostrarte publicidad más relevante. Puedes cambiar tus preferencias de publicidad en cualquier momento.

11 mn01.pptx

612 visualizaciones

Publicado el

building energy software - parasol

Publicado en: Diseño
  • Sé el primero en comentar

  • Sé el primero en recomendar esto

11 mn01.pptx

  1. 1. Solar protection inbuildings using PARASOL(BEA software) By ANIRUDH B ME Energy
  2. 2. IntroductionParasol can produce the following results:Primary and total solar transmittance for the sunshade and the window for each month during a year.Daily values of cooling and heating demand, and the maximum cooling and heating input over the year.Duration diagrams for indoor temperatures and cooling and heating load.Duration diagram for operative room temperatures.Daily values of primary transmitted solar radiation.Design days for heating and cooling.Monthly and annual values of energy use for pre-heating and pre-cooling of the inlet air.Monthly and annual values of electricity output when a sunshade of type PV screen is used.
  3. 3. Comparison of two different window structures and sun shades1.Solar protection simulation using single pane window andawning sunshade:Geometry of the room:
  4. 4. Comparison of two different window structures and sun shades1.Solar protection simulation using single pane window andawning sunshade:Window embrasure andframe:
  5. 5. Comparison of two different window structures1.Solar protection simulation using double pane window andawning sunshade:Site and orientation:
  6. 6. Comparison of two different window structures1.Solar protection simulation using single pane window andawning sunshade:Walls construction:
  7. 7. Window type:
  8. 8. External Sunshade: Awning
  9. 9. Interpane Sunshade: Venetian blind
  10. 10. Internal Sunshade: Pleated curtain
  11. 11. Solar Transmittance Simulation: Double pane window withawning sunshade
  12. 12. Solar Transmittance Simulation: Double pane window withawning sunshade
  13. 13. Energy Balance Simulation: Double pane window with awningsunshade (Energy required to keep the inlet air at 17 deg C)
  14. 14. Energy Balance Simulation: Double pane window with awningsunshade ( solar insolation with and without sunshade)
  15. 15. Energy Balance Simulation: Double pane window with awningsunshade ( heat and cold energy required with sunshade per day)
  16. 16. Energy Balance Simulation: Double pane window withawning sunshade (design days – peak load)
  17. 17. Energy Balance Simulation: Double pane window withawning sunshade (design days – outdoor temp)
  18. 18. Solar transmittance Simulation: Triple pane window withawning sunshade
  19. 19. Solar transmittance Simulation: Triple pane window withawning sunshade
  20. 20. Energy balance Simulation: Triple pane window withawning sunshade
  21. 21. Energy balance Simulation: Triple pane window withawning sunshade
  22. 22. Energy balance Simulation: Triple pane window withawning sunshade
  23. 23. Energy balance Simulation: Triple pane window withawning sunshade
  24. 24. Energy balance Simulation: Triple pane window withawning sunshade
  25. 25. Conclusion:Solar protection in buildings is simulated for two differentwindow structures and arrived with the following conclusion:The maximum cooling and heating load decreases by 9W and 36W when triple pane window is used.Therefore the cooling and heating demand also decreases accordingly.The usage of sunshades during summer conditions is a must since it reduces the energy usage by nearly 45 -50% (in both window structures)The usage of sunshades during winter conditions must be avoided since it reduces energy usage by nearly 30% (in both window structures).
  26. 26. References:PARASOL V6.6 – Energy Efficiency and Renewable Energy, US department of Energy.

×