It introduces the Discontinued Analog Switch from Some Famous Brands

1. Seekcomponents, one-stop sourcing service provider
Glance Over the Discontinued Analog Switch from Some Famous Brands
ST STG6684/ STG6384 series: High isolation dual SPDT analog switch
S
NENT
EKC OMPO
SE
The STG6684/ STG6384 is a high-speed CMOS low voltage dual analog SPDT (single pole dual throw) switch or 2:1
multiplexer/de-multiplexer switch fabricated in silicon gate C2MOS technology.
It is designed to operate from 1.65 to 4.3 V, making this device ideal for portable applications. The SELn inputs are
provided to control the switch operation. The switch Sn is ON (connected to common ports Dn) when the SELn input is
held low and OFF (high impedance state exists between the two ports) when SELn is held high.
TI AH5010/AH5011/AH5012
A versatile family of monolithic JFET analog switches economically fulfills a wide variety of multiplexing and analog
switching applications.
TI MPC100 series: Wide Bandwidth 4X1 Video Multiplexer
PON ENTS
M
SE EKCO
The MPC100 is a very wide bandwidth 4 to 1 channel Video Signal Multiplexer which can be used in a wide variety of
applications.
MPC100 is designed for wide-bandwidth systems, including high-definition television and broadcast equipment.
Although it is primarily used to route video signals, the harmonic and dynamic attributes of the MPC100 make it
appropriate for other analog signal routing applications such as radar, communications, computer graphics, and data
acquisition systems.
1

2. Seekcomponents, one-stop sourcing service provider
The MPC100 consists of four identical monolithic integrated open-loop buffer amplifiers, which are connected
internally at the output. The unidirectional transmission path consists of bipolar complementary buffers, which offer
extremely high output-to-input isolation.
Vishay DG201A_MIL/202_MIL/ DG303A_MIL: Monolithic Quad SPST CMOS Analog Switches
S
NENT
EKC OMPO
SE
The DG201A_MIL and DG202_MIL are quad SPST analog switches designed to provide accurate switching over a
ENTS
wide range of input signals. When combining a low on-resistance and a wide signal range (_15 V) with low
PON
charge-transfer these devices are well suited for industrial and military applications. The DG303A_MIL is a monolithic
M
EKCO
CMOS switch in a DPST configuration for precision applications in communications; instrumentation and process
SE
control, where low leakage switching combined with low power consumption are required.
2

3. Seekcomponents, one-stop sourcing service provider
Supertex HV207, HV21716/HV21816: High Voltage Analog Switch
S
NENT
EKC OMPO
SE
The Supertex HV207 is an 8-channel high-voltage analog switch integrated circuit (IC) confi gured as a dual 1 of 4
analog switches. The 2 sets of 4 analog switches are controlled independently with the 2 independent 1:4 decoders.
The addressed switches are turned ON and the unaddressed switches are turned OFF. Logic high on the input clear
pin will turn OFF all output switches regardless of the address input states.
The HV21716/HV21816 is a low charge injection 8-channel high-voltage analog switch integrated circuit (IC) intended
for use in applications requiring high voltage switching controlled by low voltage control signals, such as ultrasound
imaging and printers.
PON ENTS
M
SE EKCO
3

4. Seekcomponents, one-stop sourcing service provider
Seekcomponents
Home Page
http://www.seekcomponents.com
Address
2507 Rustic Ridge Loop，
Lutz FL 33559，
S
NENT
USA
EKC OMPO
SE
Email：steve@baitron.com
Seekcomponents is a one-stop sourcing service provider for ICs, connectors, discretes, transistors and other
components and devices. Seekcomponents offers a highly reliable supply source for hard to find, obsolete and long
lead time components, as well as a competitive source of cost saving on current available components. Our vast
inventory is built on our relationships with thousands of suppliers worldwide, including electronic component
manufacturers, distributors, contract manufacturers, and OEMs.
PON ENTS
M
SE EKCO
4