Ahsan manzil

mmh shohagh
mmh shohaghStudent at Daffodil International University
321
TO OUR PRESENTATION
group
A
Ahsan manzil
Presented By,
Md. Moynul Hasan
152-15-5982
Iftakhar Ahmed
152-15-5994
Akram Hossain Antor
152-15-5996
akash saha
152-15-5990
A.K.M Mohaimin Hossain
152-15-6004 Md: Nahid Hasan
152-15-5987
Md. Ahsan Ullah
151-15-4695
Md Mahabur Alam
152-15-5811
Abu Nahian Fahad
152-15-6030
Toufik Hossain
152-15-5584-
Ahsan manzil
Ahsan manzil
Ahsan manzil
Introduction
Ahsan manzil
 Most important historical place in Bangladesh.
 It was the official residential palace and seat of
the Dhaka Nawab Family.
 It was built in 1859-1872.
 Situated at Kumartoli along the banks of
Buriganga river.
 It has been designated as the nation museum in
Bangladesh.
Ahsan manzil
It was actually built by Nawab sir Abdul Gani in 1872.
Named it Ahsan Manzil after the name of his beloved
son Khwaza Ahsanullah. The palace was reconstructed
in 1888.The Dome was created in the time of reconstruct.
In 1874, Lord Northbrook, Governor General
of India attended an evening function at Ahsan
Manzil. In 1888, Lord Dufferin also accepted
the hospitality offered at Ahsan Manzil. In 1904
Lord Curzon, on a visit to East Bengal, stayed in
this palace on 18 and 19 February to win public
support for the proposed Partition of Bengal.
Almost all political activities of Nawab Khwaja
Salimullah centred round this palace.
Ahsan Manzil was the cradle of the
All India Muslim League.
In 1952, the Dhaka Nawab State was acquired
under the East Bengal Estate Acquisition Act.
Nawab Khwaja Habibullah started living at
Paribag Green House soon after the acquisition
of the zamindari. After the independence of
Bangladesh, most of the nawab family went to
Abroad. On 1974, the owners of the palace decided
to put it up for auction.
Ahsan manzil
The building structure was established on a raised
meter, the two-storied palace measures 125.4m b
height of the ground floor is 5 meters and the he
floor is 5.8 meters. The thickness of the walls of
about 0.78 meters. The peak of this dome is 27.1
ground.
5 government of Bangladesh recognizing Ahsan Manz
Historical place. In 1992 it brought under the contr
National museum. Bangabandhu Sheikh Mujibur Rah
Establish Ahsan Manzil as a museum and tourist cen
Consenvation on1974. The total area of acquired la
Ahsan manzil
Gallery No: 1,
(Introducing Ahsan Manzil-l)
Gallery No: 2,
(Introducing Ahsan Manzil-II)
Gallery NO: 3,
(Palace Dining Room)
Gallery No: 4,
(The Round Room)
Gallery No: 5,
(The Grand Stair Case ( Ground floor))
Gallery NO: 6,
(Ahsanullah Memorial Hospital)
Gallery No: 7,
(Muslim League Room)
Gallery No: 8,
(Billiard Room)
Gallery No: 9,
(Chest or Treasury Room)
Gallery No: 10,
(Introducing the Nawabs)
Gallery No: 10 (A),
(Corner staircase Room)
Gallery No: 11,
(Portrait - 1)
Gallery No: 12,
(In memory of Salimullah)
Gallery No: 13,
(Portrait - 2)
Gallery No: 14,
(Hindustani Room)
Gallery No: 15,
(Grand Staircase (first floor))
Gallery No: 16,
(Palace Library Room)
Gallery No: 17,
(Card Room)
Gallery No: 18,
( Nawab's contribution to
Dhaka water supply)
Gallery No: 19,
(State Bed Room)
Gallery No: 20,
(Nawab's contribution to
Dhaka Electric Supply)
Gallery No: 21,
(Palace Drawing Room)
Gallery No: 22,
(Round Room (first floor))
Gallery No: 23,
(Ball Room)
Ahsan manzil
Ahsan manzil
Ahsan manzil
Ahsan Manzil
Group Photo
Group Photo
Right Side , Ahsan Manzil
Rafi,Antor,Akash,Fahad
Boat Journey
Lunch
Puran, Dhaka
Ahsan manzil
Ahsan manzil
Ahsan manzil
Ahsan manzil
Ahsan manzil
Ahsan manzil
Ahsan manzil
Ahsan manzil
Ahsan manzil
1 de 41

Recomendados

Ahsan Monjil por
Ahsan MonjilAhsan Monjil
Ahsan MonjilMd Abdullah Al Mayin
1.2K vistas18 diapositivas
Visit to ahsan manzil por
Visit to ahsan manzilVisit to ahsan manzil
Visit to ahsan manzilTanvir Rashid Chowdhury
867 vistas25 diapositivas
Ahsan manzil por
Ahsan manzilAhsan manzil
Ahsan manzilSamira Mohammadi
1.7K vistas20 diapositivas
Ahsan Manzil presentation‬ por
Ahsan  Manzil presentation‬Ahsan  Manzil presentation‬
Ahsan Manzil presentation‬Daffodil International University
3.6K vistas35 diapositivas
Historical Significance of Ahsan Manzil por
Historical Significance of  Ahsan ManzilHistorical Significance of  Ahsan Manzil
Historical Significance of Ahsan ManzilInamul Hossain Imran
764 vistas15 diapositivas
Ahsan manzil por
Ahsan manzilAhsan manzil
Ahsan manzilMazharul Sabbir
1.1K vistas18 diapositivas

Más contenido relacionado

La actualidad más candente

Historical Places Of Bangladesh por
Historical Places Of BangladeshHistorical Places Of Bangladesh
Historical Places Of Bangladeshkingofdarkness
25.9K vistas22 diapositivas
LAL QUILA por
LAL QUILA LAL QUILA
LAL QUILA Aakashkumar9307
1.8K vistas8 diapositivas
Red fort delhi_deip soni por
Red fort delhi_deip soniRed fort delhi_deip soni
Red fort delhi_deip soniDeip Soni
2K vistas8 diapositivas
India gate por
India gateIndia gate
India gateNishita Mohta
11.7K vistas22 diapositivas
Red Fort Delhi por
Red Fort DelhiRed Fort Delhi
Red Fort DelhiKaushal joshi
9.9K vistas17 diapositivas
Red fort and President House Compare and Contrast por
Red fort and President House Compare and ContrastRed fort and President House Compare and Contrast
Red fort and President House Compare and ContrastAman Gupta
2.5K vistas24 diapositivas

La actualidad más candente(20)

Historical Places Of Bangladesh por kingofdarkness
Historical Places Of BangladeshHistorical Places Of Bangladesh
Historical Places Of Bangladesh
kingofdarkness25.9K vistas
Red fort delhi_deip soni por Deip Soni
Red fort delhi_deip soniRed fort delhi_deip soni
Red fort delhi_deip soni
Deip Soni2K vistas
Red fort and President House Compare and Contrast por Aman Gupta
Red fort and President House Compare and ContrastRed fort and President House Compare and Contrast
Red fort and President House Compare and Contrast
Aman Gupta2.5K vistas
Red fort ppt por 8434355743
Red fort pptRed fort ppt
Red fort ppt
843435574318.4K vistas
presentation on Red Fort by Shagun por Shags Shagun
presentation on Red Fort by Shagunpresentation on Red Fort by Shagun
presentation on Red Fort by Shagun
Shags Shagun1.7K vistas
Red fort presentation.ppt por 8434355743
Red fort presentation.ppt Red fort presentation.ppt
Red fort presentation.ppt
84343557431.4K vistas
Lesser known monuments of delhi por Arun Kumar
Lesser known monuments of delhiLesser known monuments of delhi
Lesser known monuments of delhi
Arun Kumar841 vistas
Presentation on Lalbagh Fort- A Historical Place por Ariful Islam
Presentation on Lalbagh Fort- A Historical PlacePresentation on Lalbagh Fort- A Historical Place
Presentation on Lalbagh Fort- A Historical Place
Ariful Islam1.8K vistas
Mulee Aage - The Presidential Palace (Maldives) por Mubyna Ibrahim
Mulee Aage - The Presidential Palace (Maldives)Mulee Aage - The Presidential Palace (Maldives)
Mulee Aage - The Presidential Palace (Maldives)
Mubyna Ibrahim1.6K vistas
Victoria memorial kolkata por Moyukh Roy
Victoria memorial kolkataVictoria memorial kolkata
Victoria memorial kolkata
Moyukh Roy13.8K vistas
SHISH MAHAL LAHORE PAKISTAN por namePPS
SHISH MAHAL LAHORE PAKISTANSHISH MAHAL LAHORE PAKISTAN
SHISH MAHAL LAHORE PAKISTAN
namePPS324 vistas
Old forts of Delhi por Priyank Jain
Old forts of DelhiOld forts of Delhi
Old forts of Delhi
Priyank Jain2.6K vistas
Victoria memorial presentation por JAI BAMORIYA
Victoria memorial presentationVictoria memorial presentation
Victoria memorial presentation
JAI BAMORIYA1.7K vistas

Destacado

Hazards of moviegoing por
Hazards of moviegoingHazards of moviegoing
Hazards of moviegoingSamira Mohammadi
1.8K vistas14 diapositivas
Historical places of bangladesh por
Historical places of bangladeshHistorical places of bangladesh
Historical places of bangladeshKamrul Hasan
2.6K vistas22 diapositivas
National memorial por
National memorialNational memorial
National memorialGyanbikash
1.5K vistas29 diapositivas
The historical places of Bangladesh por
The historical places of Bangladesh The historical places of Bangladesh
The historical places of Bangladesh SAJID BIN RASHID
2.6K vistas15 diapositivas
Lalbagh fort por
Lalbagh fortLalbagh fort
Lalbagh fortSopnil Ahmed
2.8K vistas19 diapositivas
Beautiful Bangladesh por
Beautiful BangladeshBeautiful Bangladesh
Beautiful BangladeshSrinjoy Das
6.4K vistas24 diapositivas

Destacado(7)

Historical places of bangladesh por Kamrul Hasan
Historical places of bangladeshHistorical places of bangladesh
Historical places of bangladesh
Kamrul Hasan2.6K vistas
National memorial por Gyanbikash
National memorialNational memorial
National memorial
Gyanbikash1.5K vistas
The historical places of Bangladesh por SAJID BIN RASHID
The historical places of Bangladesh The historical places of Bangladesh
The historical places of Bangladesh
SAJID BIN RASHID2.6K vistas
Beautiful Bangladesh por Srinjoy Das
Beautiful BangladeshBeautiful Bangladesh
Beautiful Bangladesh
Srinjoy Das6.4K vistas
Advantages and Disadvantages of Mobile phone por Muhammad Ali
Advantages and Disadvantages of Mobile phoneAdvantages and Disadvantages of Mobile phone
Advantages and Disadvantages of Mobile phone
Muhammad Ali180.8K vistas

Similar a Ahsan manzil

Ahsan Manzil por
Ahsan Manzil Ahsan Manzil
Ahsan Manzil Daffodil International University
2.3K vistas35 diapositivas
Delhi’s astonishing tourists spots por
Delhi’s astonishing tourists spotsDelhi’s astonishing tourists spots
Delhi’s astonishing tourists spotsAbdul Raheem
347 vistas18 diapositivas
Monuments of India por
Monuments of IndiaMonuments of India
Monuments of Indiaamolkv
455 vistas24 diapositivas
Monumental heritage in delhi por
Monumental heritage in delhiMonumental heritage in delhi
Monumental heritage in delhiUtkarsh Verma
1.2K vistas5 diapositivas
mandav por
mandavmandav
mandavSumant Agnihotri
2.1K vistas8 diapositivas
Computer vacation project por
Computer vacation projectComputer vacation project
Computer vacation projectAbubakerTasveer
859 vistas24 diapositivas

Similar a Ahsan manzil(20)

Delhi’s astonishing tourists spots por Abdul Raheem
Delhi’s astonishing tourists spotsDelhi’s astonishing tourists spots
Delhi’s astonishing tourists spots
Abdul Raheem347 vistas
Monuments of India por amolkv
Monuments of IndiaMonuments of India
Monuments of India
amolkv455 vistas
Monumental heritage in delhi por Utkarsh Verma
Monumental heritage in delhiMonumental heritage in delhi
Monumental heritage in delhi
Utkarsh Verma1.2K vistas
WAJID ALI SHAH – THE LAST NAWAB OF OUDH AND HIS CULINARY HERITAGE.pptx por Aveen Das
WAJID ALI SHAH – THE LAST NAWAB OF OUDH AND HIS CULINARY HERITAGE.pptxWAJID ALI SHAH – THE LAST NAWAB OF OUDH AND HIS CULINARY HERITAGE.pptx
WAJID ALI SHAH – THE LAST NAWAB OF OUDH AND HIS CULINARY HERITAGE.pptx
Aveen Das9 vistas
Planning of fatehpur sikhri por ctlachu
Planning of fatehpur sikhriPlanning of fatehpur sikhri
Planning of fatehpur sikhri
ctlachu42.7K vistas
Red fort presentation.ppt 111111 por 8434355743
Red fort presentation.ppt 111111Red fort presentation.ppt 111111
Red fort presentation.ppt 111111
8434355743703 vistas
Historicalplacesofbangladesh 090404084226-phpapp02 por sahilsharma021
Historicalplacesofbangladesh 090404084226-phpapp02Historicalplacesofbangladesh 090404084226-phpapp02
Historicalplacesofbangladesh 090404084226-phpapp02
sahilsharma0211.4K vistas
Architecture of mysuru palaces por srinivashebar
Architecture of mysuru palacesArchitecture of mysuru palaces
Architecture of mysuru palaces
srinivashebar1.5K vistas
fatehpur sikri architecture history mughals por manoj chauhan
fatehpur sikri architecture history mughalsfatehpur sikri architecture history mughals
fatehpur sikri architecture history mughals
manoj chauhan831 vistas
Hyderabad ppt por geetanjali23
Hyderabad pptHyderabad ppt
Hyderabad ppt
geetanjali2342.2K vistas
Best presentation on shahi fort lahore por maherraza
Best presentation on shahi fort lahoreBest presentation on shahi fort lahore
Best presentation on shahi fort lahore
maherraza14.2K vistas
Shahi fort lahore por maherraza
Shahi fort lahoreShahi fort lahore
Shahi fort lahore
maherraza1.5K vistas
Mughalempire por Hamid Pasha
MughalempireMughalempire
Mughalempire
Hamid Pasha1.3K vistas
historical places in Pakistan por zjhelper
historical     places    in   Pakistanhistorical     places    in   Pakistan
historical places in Pakistan
zjhelper72 vistas

Último

Pdffromtextfile_1.pdf por
Pdffromtextfile_1.pdfPdffromtextfile_1.pdf
Pdffromtextfile_1.pdfTRIEU QUANG NGO
8 vistas2 diapositivas
a timeline of the history of linguistics- BAUTISTA- BELGERA.pdf por
a timeline of the history of linguistics- BAUTISTA- BELGERA.pdfa timeline of the history of linguistics- BAUTISTA- BELGERA.pdf
a timeline of the history of linguistics- BAUTISTA- BELGERA.pdfFordBryantSadio
6 vistas46 diapositivas
Competition and Innovation - The Role of Innovation in Enforcement Cases – OE... por
Competition and Innovation - The Role of Innovation in Enforcement Cases – OE...Competition and Innovation - The Role of Innovation in Enforcement Cases – OE...
Competition and Innovation - The Role of Innovation in Enforcement Cases – OE...OECD Directorate for Financial and Enterprise Affairs
109 vistas4 diapositivas
Deafening Silence por
Deafening SilenceDeafening Silence
Deafening SilenceSarah Carpino
30 vistas14 diapositivas
Not Ashamed por
Not AshamedNot Ashamed
Not AshamedCentral Church of Christ
24 vistas11 diapositivas
Maximiliano Roa - eRetail Week Blended [Professional] Experience 2023 por
Maximiliano Roa - eRetail Week Blended [Professional] Experience 2023Maximiliano Roa - eRetail Week Blended [Professional] Experience 2023
Maximiliano Roa - eRetail Week Blended [Professional] Experience 2023eCommerce Institute
6 vistas14 diapositivas

Último(20)

a timeline of the history of linguistics- BAUTISTA- BELGERA.pdf por FordBryantSadio
a timeline of the history of linguistics- BAUTISTA- BELGERA.pdfa timeline of the history of linguistics- BAUTISTA- BELGERA.pdf
a timeline of the history of linguistics- BAUTISTA- BELGERA.pdf
FordBryantSadio6 vistas
Maximiliano Roa - eRetail Week Blended [Professional] Experience 2023 por eCommerce Institute
Maximiliano Roa - eRetail Week Blended [Professional] Experience 2023Maximiliano Roa - eRetail Week Blended [Professional] Experience 2023
Maximiliano Roa - eRetail Week Blended [Professional] Experience 2023
Helko van den Brom - VSL por Dutch Power
Helko van den Brom - VSLHelko van den Brom - VSL
Helko van den Brom - VSL
Dutch Power132 vistas
Gym Members Community.pptx por nasserbf1987
Gym Members Community.pptxGym Members Community.pptx
Gym Members Community.pptx
nasserbf198711 vistas
Chris Ferris Retrain Manitoba Presentation - CEA - June 2, 2023.pdf por ChrisFerris
Chris Ferris Retrain Manitoba Presentation - CEA - June 2, 2023.pdfChris Ferris Retrain Manitoba Presentation - CEA - June 2, 2023.pdf
Chris Ferris Retrain Manitoba Presentation - CEA - June 2, 2023.pdf
ChrisFerris5 vistas
Christan van Dorst - Hyteps por Dutch Power
Christan van Dorst - HytepsChristan van Dorst - Hyteps
Christan van Dorst - Hyteps
Dutch Power130 vistas
I use my tools to help people por mywampa
I use my tools to help peopleI use my tools to help people
I use my tools to help people
mywampa9 vistas
Learning from Disaster - How a positive safety approach saves lives_MYOSH Web... por kristinashields1
Learning from Disaster - How a positive safety approach saves lives_MYOSH Web...Learning from Disaster - How a positive safety approach saves lives_MYOSH Web...
Learning from Disaster - How a positive safety approach saves lives_MYOSH Web...
kristinashields136 vistas

Ahsan manzil

  • 1. 321
  • 5. Md. Moynul Hasan 152-15-5982 Iftakhar Ahmed 152-15-5994 Akram Hossain Antor 152-15-5996 akash saha 152-15-5990 A.K.M Mohaimin Hossain 152-15-6004 Md: Nahid Hasan 152-15-5987 Md. Ahsan Ullah 151-15-4695 Md Mahabur Alam 152-15-5811 Abu Nahian Fahad 152-15-6030 Toufik Hossain 152-15-5584-
  • 11.  Most important historical place in Bangladesh.  It was the official residential palace and seat of the Dhaka Nawab Family.  It was built in 1859-1872.  Situated at Kumartoli along the banks of Buriganga river.  It has been designated as the nation museum in Bangladesh.
  • 13. It was actually built by Nawab sir Abdul Gani in 1872. Named it Ahsan Manzil after the name of his beloved son Khwaza Ahsanullah. The palace was reconstructed in 1888.The Dome was created in the time of reconstruct.
  • 14. In 1874, Lord Northbrook, Governor General of India attended an evening function at Ahsan Manzil. In 1888, Lord Dufferin also accepted the hospitality offered at Ahsan Manzil. In 1904 Lord Curzon, on a visit to East Bengal, stayed in this palace on 18 and 19 February to win public support for the proposed Partition of Bengal. Almost all political activities of Nawab Khwaja Salimullah centred round this palace. Ahsan Manzil was the cradle of the All India Muslim League.
  • 15. In 1952, the Dhaka Nawab State was acquired under the East Bengal Estate Acquisition Act. Nawab Khwaja Habibullah started living at Paribag Green House soon after the acquisition of the zamindari. After the independence of Bangladesh, most of the nawab family went to Abroad. On 1974, the owners of the palace decided to put it up for auction.
  • 17. The building structure was established on a raised meter, the two-storied palace measures 125.4m b height of the ground floor is 5 meters and the he floor is 5.8 meters. The thickness of the walls of about 0.78 meters. The peak of this dome is 27.1 ground.
  • 18. 5 government of Bangladesh recognizing Ahsan Manz Historical place. In 1992 it brought under the contr National museum. Bangabandhu Sheikh Mujibur Rah Establish Ahsan Manzil as a museum and tourist cen Consenvation on1974. The total area of acquired la
  • 20. Gallery No: 1, (Introducing Ahsan Manzil-l) Gallery No: 2, (Introducing Ahsan Manzil-II) Gallery NO: 3, (Palace Dining Room) Gallery No: 4, (The Round Room) Gallery No: 5, (The Grand Stair Case ( Ground floor))
  • 21. Gallery NO: 6, (Ahsanullah Memorial Hospital) Gallery No: 7, (Muslim League Room) Gallery No: 8, (Billiard Room) Gallery No: 9, (Chest or Treasury Room)
  • 22. Gallery No: 10, (Introducing the Nawabs) Gallery No: 10 (A), (Corner staircase Room) Gallery No: 11, (Portrait - 1)
  • 23. Gallery No: 12, (In memory of Salimullah) Gallery No: 13, (Portrait - 2) Gallery No: 14, (Hindustani Room) Gallery No: 15, (Grand Staircase (first floor)) Gallery No: 16, (Palace Library Room)
  • 24. Gallery No: 17, (Card Room) Gallery No: 18, ( Nawab's contribution to Dhaka water supply) Gallery No: 19, (State Bed Room) Gallery No: 20, (Nawab's contribution to Dhaka Electric Supply)
  • 25. Gallery No: 21, (Palace Drawing Room) Gallery No: 22, (Round Room (first floor)) Gallery No: 23, (Ball Room)
  • 30. Group Photo Right Side , Ahsan Manzil

Notas del editor

  1. Animated countdown timer on textured background (Difficult) Tip: Some shape effects on this slide are created with the Combine Shapes commands. To access this command, you must add it to the Quick Access Toolbar, located above the File tab. To customize the Quick Access Toolbar, do the following: Click the arrow next to the Quick Access Toolbar, and then under Customize Quick Access Toolbar click More Commands. In the PowerPoint Options dialog box, in the Choose commands from list, select All Commands. In the list of commands, click Combine Shapes, and then click Add. To reproduce the donut shape effects on this slide, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the Insert tab, in the Illustrations group, click Shapes, and then under Basic Shapes click Donut. On the slide, drag to draw a donut. Drag the yellow sizing handle so that the donut is roughly 0.25” in thickness. Select the donut. Under Drawing Tools, on the Format tab, in the Size group, in the Height box enter 5” and in the Width box enter 5”. Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Outline and then click No Outline. On the Insert tab, in the Illustrations group, click Shapes, and then under Rectangles click Rectangle. On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, in the Height box enter 5.5” and in the Width box enter 0.08”. Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Outline and then click No Outline. Select the rectangle. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate. Repeat this process this process 7 times for a total of 9 thin rectangles. Select a duplicate rectangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane, and in the Size pane, under Size and rotate, in the Rotation box enter 10. Select another duplicate rectangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane, and in the Size pane, under Size and rotate, in the Rotation box enter 20. Select another duplicate rectangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane, and in the Size pane, under Size and rotate, in the Rotation box enter 30. Select another duplicate rectangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane, and in the Size pane, under Size and rotate, in the Rotation box enter 40. Select another duplicate rectangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane, and in the Size pane, under Size and rotate, in the Rotation box enter 50. Select another duplicate rectangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane, and in the Size pane, under Size and rotate, in the Rotation box enter 60. Select another duplicate rectangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane, and in the Size pane, under Size and rotate, in the Rotation box enter 70. Select the last duplicate rectangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane, and in the Size pane, under Size and rotate, in the Rotation box enter 80. Press and hold CTRL, and then select all of the small thin rectangles. On the Quick Access Toolbar, click Combine Shapes, and then click Shape Union. Also on the Home tab, in the Clipboard group, click Copy, and then click Duplicate. Select the duplicate group of rectangles. On the Home tab, in the Drawing group, click Arrange, point to Rotate, and then click Rotate Right 90°. On the Home tab, in the Edit group, click Select, and then click Select All. Also on the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align to Slide. Click Align Middle. Click Align Center. Press and hold CTRL, select the donut shape, and then select the first group of rectangles. On the Quick Access Toolbar, click Combine Shapes, and then click Shape Subtract. Press and hold CTRL, select the donut shape, and then select the second group of rectangles. On the Quick Access Toolbar, click Combine Shapes, and then click Shape Subtract. On the Insert tab, in the Illustrations group, click Shapes, and then under Basic Shapes click Donut. On the slide, drag to draw a donut. Drag a sizing handle so that the donut is roughly 0.5” in thickness. Select the second donut. Under Drawing Tools, on the Format tab, in the Size group, in the Height box enter 5.21” and in the Width box enter 5.21”. Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Outline, and then click No Outline. Press and hold CTRL, select the second donut, and then select the first, segmented donut. On the Quick Access Toolbar, click Combine Shapes, and then click Shape Subtract. Select the remaining donut. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following: Click the button next to Preset colors and then click Silver. In the Type list, select Linear. Also in the Format Shape dialog box, click Line Color in the left pane, and then in the Line Color pane click No line. Also in the Format Shape dialog box, click Shadow in the left pane, in the Shadow pane, click the button next to Presets, and then under Outer click Offset Center. Also in the Format Shape dialog box, click 3-D Format in the left pane, in the 3-D Format pane, under Bevel, click the button next to Top and then click Slope. On the Insert tab, in the Illustrations group, click Shapes, and then under Basic Shapes click Donut. On the slide, drag to draw a donut. Drag a sizing handle so that the donut is roughly 0.25” in thickness. Select the new donut. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 194, Green: 10, and Blue: 6. Also in the Format Shape dialog box, click Line Color in the left pane, and then in the Line Color pane click No line. Also in the Format Shape dialog box, click Size in the left pane, in the Size pane, under Size and rotate, in the Height box enter 5.14” and in the Width box enter 5.14”. Select the new donut. On the Home tab, in the Drawing group, click Arrange, and then click Send Backward. Press and hold CTRL, and then select the two donuts. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align Selected Objects. Click Align Center. Click Align Middle. With both donuts selected, drag the donuts so that the top edge is roughly 1” from the top edge of the slide. To reproduce the other shape effects on this slide, do the following: On the Insert tab, in the Illustrations group, click Shapes, and then under Rectangles click Rectangle. On the slide, drag to draw a rectangle. Select the rectangle. On the Home tab, in the Drawing tab, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following: In the Type list, select Linear. In the Angle box, enter 90. Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider, then customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Position box, enter 0%. Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, first option from the left). In the Transparency box, enter 75%. Select the next stop in the slider, and then do the following: In the Position box, enter 35%. Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, first option from the left). In the Transparency box, enter 0%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, first option from the left). In the Transparency box, enter 100%. Also in the Format Shape dialog box, click Line Color in the left pane, and then in the Line Color pane click No line. Also in the Format Shape dialog box, click Size, and in the Height box enter 7.5, and in the Width box enter 2.83. On the slide, select the rectangle. On the Home tab, in the Drawing group, click Arrange, and then click Send Backward. Also on the Home tab, in the Drawing group, click Arrange, point to Align, and then click Align Middle and Align Center. To reproduce the text effects on this slide, do the following: On the Insert tab, in the Text group, click Text Box. On the slide, drag to draw a text box. Type “3” in the text box, and then select the text. On the Home tab, in the Font group, select Lucida Bright from the Font list, select White, Background 1 from the Font Color list, and then select 96 pt. from the Font Size list. Select the text box. On the Home tab, in the Clipboard group, click the arrow next to Copy, and then click Duplicate. Select the second text box. Change the text to “2.” Select the text box. On the Home tab, in the Clipboard group, click the arrow next to Copy, and then click Duplicate. Select the third text box. Change the text to “1.” Press and hold CTRL, and then select all three text boxes. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align Selected Objects. Click Align Middle. Click Align Center. With all three text boxes selected, position the text boxes in the center of the two donuts. To reproduce the animation effects on this slide, do the following: On the Home tab, in the Editing group, click Select, and then click Selection Pane. On the slide, select the silver, segmented donut. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Grow & Turn. Also on the Animations tab, in the Timing group, do the following: In the Start list, select With Previous. In the Duration box, enter 1.00. On the slide, select the gradient-fill rectangle. On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Entrance Effects. In the Add Entrance Effect dialog box, under Subtle, click Expand. Also on the Animations tab, in the Timing group, do the following: In the Start list, select With Previous. In the Duration box, enter 1.00. On the slide, select the red, solid donut. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade. Also on the Animations tab, in the Timing group, do the following: In the Start list, select After Previous. In the Duration box, enter 0.25. In the Selection and Visibility pane, select the “3” text box. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade. Also on the Animations tab, in the Timing group, in the Duration box enter 0.50. Select the red, solid donut. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Wheel. Also on the Animations tab, in the Timing group, do the following: In the Start list, select With Previous. In the Duration box, enter 1.00. In the Selection and Visibility pane, select the “3” text box. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade. Also on the Animations tab, in the Timing group, do the following: In the Start list, select With Previous. In the Duration box, enter 0.50. In the Delay box, enter 0.50. In the Selection and Visibility pane, select the solid red donut. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade. Also on the Animations tab, in the Timing group, do the following: In the Start list, select With Previous. In the Duration box, enter 0.25. In the Delay box, enter 1.00. In the Selection and Visibility pane, select the “2” text box. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade. Also on the Animations tab, in the Timing group, do the following: In the Start list, select With Previous. In the Duration box, enter 0.50. In the Delay box, enter 1.00. Select the red, solid donut. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Wheel. Also on the Animations tab, in the Timing group, do the following: In the Start list, select With Previous. In the Duration box, enter 1.00. In the Selection and Visibility pane, select the “2” text box. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade. Also on the Animations tab, in the Timing group, do the following: In the Start list, select With Previous. In the Duration box, enter 0.50. In the Delay box, enter 1.50. In the Selection and Visibility pane, select the “1” text box. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade. Also on the Animations tab, in the Timing group, do the following: In the Start list, select With Previous. In the Duration box, enter 0.50. In the Delay box, enter 1.50. In the Selection and Visibility pane, select the solid red donut. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade. Also on the Animations tab, in the Timing group, do the following: In the Start list, select With Previous. In the Duration box, enter 0.25. In the Delay box, enter 1.00. In the Selection and Visibility pane, select the “1” text box. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade Also on the Animations tab, in the Timing group, do the following: In the Start list, select With Previous. In the Duration box, enter 0.50. In the Delay box, enter 2.00. Select the red, solid donut. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Wheel. Also on the Animations tab, in the Timing group, do the following: In the Start list, select With Previous. In the Duration box, enter 2.00. To reproduce the background effects on this slide, do the following: On the Insert tab, in the Illustrations group, click Shapes, and then under Rectangles click Rectangle. On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Picture or texture fill, and then do the following: Click the button next to Texture and select Brown Marble (fourth row, first option from the left). Clear the Tile picture as texture box. Also in the Format Picture dialog box, click Line Color in the left pane, and in the Line Color pane, click No line. Also in the Format Picture dialog box, click Picture Corrections in the left pane, and in the Picture Corrections pane, under Brightness and contrast, do the following: In the Brightness box, enter -42%. In the Contrast Box, enter -28%. Also in the Format Picture dialog box, click Picture Color in the left pane, and in the Picture Color pane, under Recolor, click the button next to Presets and then click Grayscale. Also in the Format Picture dialog box, click Artistic Effects in the left pane, and in the Artistic Effects pane, do the following: Click the button next to Artistic Effects and then click Blur. In the Radius box, enter 7. Also in the Format Picture dialog box, click Size in the left pane, and then under Size and rotate do the following: In the Height box, enter 7.5. In the Width box, enter 10. On the slide, select the rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and then click Align Middle and Align Center. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate. Select the second, duplicate rectangle. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, in the Transparency box, enter 90%. Also in the Format Picture dialog box, click Picture Corrections in the left pane, and in the Picture Corrections pane, under Brightness and contrast, do the following: In the Brightness box, enter 12%. In the Contrast Box, enter 44%. Also in the Format Picture dialog box, click Artistic Effects in the left pane, and in the Artistic Effects pane, do the following: Click the button next to Artistic Effects and then click Blur. In the Radius box, enter 9. On the slide, select the rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and then click Align Middle and Align Center. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate. Select the third, duplicate rectangle. Under Picture Tools, on the Format tab, in the Adjust group, click Reset Picture. Also under Picture Tools, on the Format tab, in the Picture Styles group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, and then in the Fill pane, do the following: Click the button next to Texture and then click Granite. Select Tile picture as texture. In the Transparency box, enter 94%. Also in the Format Picture dialog box, click Picture Corrections in the left pane, in the Picture Corrections pane, under Brightness and contrast, do the following: In the Brightness box, enter 2%. In the Contrast box, enter 70%. Also in the Format Picture dialog box, click Artistic Effects in the left pane, and then in the Artistic Effects pane, do the following: Click the button next to Artistic Effect and then click Photocopy. In the Detail box, enter 9. On the slide, select the third rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and then click Align Middle and Align Center. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate. Select the fourth, duplicate rectangle. On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following: In the Type list, select Radial. In the Direction list, select From Center. Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear on the slider. Customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Position box, enter 0%. Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Transparency box, enter 100%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Transparency box, enter 50%. On the slide, select the fourth rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and then click Align Middle and Align Center. Also on the Home tab, in the Editing group, click Select, and then click Select All. Also on the Home tab, in the Drawing group, click Arrange, and then click Group. On the slide, select the grouped rectangles. Also on the Home tab, in the Clipboard group, click Cut. Also on the Home tab, in the Clipboard group, click the arrow below Paste, and select Paste Special. In the Paste Special dialog box, select Paste, and then under As, select Picture (PNG). Also on the Home tab, in the Drawing group, click Arrange, point to Align and then click Align Middle and Align Center.
  2. Rule number 4: Practice design, not decoration.
  3. Fly Through 3-D transition effect and pictures (Basic) To reproduce the picture effects on this slide, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the Insert tab, in the Images group, click Picture. In the Insert Picture dialog box, select a picture and then click Insert. Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 5.33” and the width is set to 8”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes. Under Picture Tools, on the Format tab, in the Picture Styles group, click Rotated White. To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Block Arrows, click Left-Right Arrow (first row). On the slide, drag to draw a left-right arrow. Select the left-right arrow. Under Drawing Tools, on the Format tab, in the Size group, enter 0.45” in the Height box and 3.65” in the Width box. Also on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following: In the Type list, select Linear. In the Angle box, enter 0°. Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider. Also under Gradient stops, customize the gradient stops as follows: Select the first stop in the slider, and then do the following: In the Position box, enter 0%. Click the button next to Color, and then under Theme Colors, click White, Background 1, Darker 5%. Select the second stop in the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors, click White, Background 1, Darker 15%. Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line. Also in the Format Shape dialog box, click Shadow in the left pane, in the Shadow pane, click the button next to Presets, and then under Outer click Offset Center (second row). Also in the Format Shape dialog box, click Size in the left pane, in the Size pane, under Size and rotate, in the Rotation box, enter 354°. On the slide, select the shape. Begin typing to enter your text into the shape. Select the edge of the shape. On the Home tab, in the Font group, do the following: In the Font list, select Corbel. In the Font Size list, select 20 pt. Click Font Color, and then click Black, Text 1 (first row). Click Italic. Also on the Home tab, in the Paragraph group, click Center. To reproduce the transition effects on this slide, do the following: On the Transitions tab, in the Transition to This Slide group, click More, and then click Fly Through. On the Transitions tab, in the Transition to This Slide, click Effect Options, and then click In with Bounce. Also on the Transitions tab, in the Timing group, do the following: Clear the On Mouse Click box. Select After, and then in the After box enter 2.00 seconds. To reproduce the second, third, and fourth slides, do the following: In the Slides pane, select the slide. On the Home tab, in the Slides group, click the arrow below New Slide, and then click Duplicate Selected Slides. Repeat this process until there are four slides. In the Slides pane, select the second slide. On the slide, select the picture. Under Picture Tools, on the Format tab, in the Adjust group, click Change Picture. In the Insert Picture dialog box, select a picture and then click Insert. Also on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, click Size in the left pane, in the Size pane, under Size and rotate, in the Rotation box, enter 9°. Select the shape. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane, in the Size pane, under Size and rotate, in the Rotation box, enter 3°. In the Slides pane, select the third slide. On the slide, select the picture. Under Picture Tools, on the Format tab, in the Adjust group, click Change Picture. In the Insert Picture dialog box, select a picture and then click Insert. Also on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, click Size in the left pane, in the Size pane, under Size and rotate, in the Rotation box, enter 5°. Select the shape. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane, in the Size pane, under Size and rotate, in the Rotation box, enter 359°. In the Slides pane, select the fourth slide. On the slide, select the picture. Under Picture Tools, on the Format tab, in the Adjust group, click Change Picture. In the Insert Picture dialog box, select a picture and then click Insert. Also on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, click Size in the left pane, in the Size pane, under Size and rotate, in the Rotation box, enter 8°. Select the shape. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane, in the Size pane, under Size and rotate, in the Rotation box, enter 2°. To reproduce the background effects on this slide, do the following: On the Design tab, in the Background group, click Background Styles, and then click Style 4. (Note: Selecting this background style will change the colors on the slide.)
  4. …global causes.