In pursuit of excellence, NPL has introduced its brand Velvex For Total Industrial Lubricant
Solutions to the Industrial oil users. Keeping customer benefits and service at the forefront,
Velvex has been developed to provide complete satisfaction with simultaneously offering value for money to its esteemed customers.
unwanted pregnancy Kit [+918133066128] Abortion Pills IN Dubai UAE Abudhabi
Velvex Industrial Oil - Nandan Petrochem Ltd
1. Hydraulic Oil
HYDROVEL R & O
32, 46, 68, 100, 150, 220, 320, 460
IS: 3098-1983 (RA 2004), DIN 51 524 PART 1
PRODUCT DESCRIPTION: HYDROVEL R & O grades are mineral oil based top quality hydraulic oils having outstanding
corrosion protection / oxidation inhibition properties. They are made from highly refined base stocks and combination of
selected additives to give the finished product with outstanding oxidation stability, water separation capability and anti
corrosion properties. The use of an oil soluble type foam suppressant provides HYDROVEL R & O series excellent
antifoam characteristics.
APPLICATION: HYDROVEL R & O series are suggested for moderate hydraulic systems and wide variety of circulating
systems of industrial equipments.
PERFORMANCE LEVEL: Meets IS: 3098-1983 (RA 2004), DIN 51 524 PART 1
These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice at
the sole discretion of Nandan Petrochem Ltd.
200
Product Data Sheet
Typical Properties
40-37-3 (30)40-37-3 (20)
CHARACTERISTICS HYDROVEL R & O
Grades 32 46 68 100 150 220 320 460
Kinematic Viscosity @40°C, cSt. 30-34 43-49 66-72 95-105 145-160 210-230 300-340 440 -480
Viscosity Index, Min. 95 95 95 90 90 90 90 90
Flash Point ,COC,°C,Min. 190 200 220 220 220 230 250 250
Pour Point, °C, Max. (-)6 (-)3 (-)3 (-)3 (-)3 (-)3 (-)3 (-)3
Copper strip Corrosion for 3 hrs @100°C. 1 1 1 1 1 1 1 1
Rust prevention Test, 24 hrs. Passes Passes Passes Passes Passes Passes Passes Passes
Foam Characteristics: Foam stability after
10 minutes settling time ,foam ml,seq I/II/III Nil Nil Nil Nil Nil Nil Nil Nil
Emulsion characteristics, Max.
Rev.No. 01-01/04/2013
2. These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice at
the sole discretion of Nandan Petrochem Ltd.
PRODUCT DESCRIPTION : HYDROVEL AW grades are blends of high viscosity index, chemically stable base oils
and specially selected anti-wear, anti-oxidation, anti-rust and anti-foam additives. These oils have good
demulsibility characteristics. They meet the requirements of very high pressure systems (1000 psi and above) and
also of systems where high speed actuations are desired.
APPLICATION : HYDROVEL AW grades are extensively used to actuate various mechanisms of special purpose
machines, positive displacement pumps such as axial, piston, vane and gear types etc. They can also be used in
enclosed gear boxes, compressors, chain drives, machine tools, circulation oiling systems, etc.
PERFORMANCE LEVEL : HYDROVEL AW 32 TO AW 150 grades Meet IS 10522 – 1983 (RA 1998), DIN 51 524 PART 1.
Product Data Sheet
Hydraulic Oil
HYDROVEL AW
32, 46, 68, 100, 150, 220, 320, 460
IS: 10522-1983(RA 1998), DIN 51 524 PART 1.
Typical Properties
CHARACTERISTICS HYDROVEL AW
Grades 32 46 68 100 150 220 320 460
Kinematic Viscosity @40°C, cSt. 30-34 43-49 66-72 95-105 145-160 210-230 300-340 440 -480
Viscosity Index, Min. 95 95 95 90 90 90 90 90
Flash Point ,COC,°C,Min. 200 200 220 220 230 240 250 250
Pour Point, °C, Max. (-)6 (-)6 (-)6 (-)6 (-)6 (-)6 (-)6 (-)6
Copper strip Corrosion for 3 hrs @100°C. 1 1 1 1 1 1 1 1
Rust prevention Test, 24 hrs. Passes Passes Passes Passes Passes Passes Passes Passes
Foam Characteristics: Foam stability after
10 minutes settling time ,foam ml,seq I/II/III Nil Nil Nil Nil Nil Nil Nil Nil
Emulsion characteristics, Max.
200
40-37-3
(20)
40-37-3
(30)
Rev.No. 01-01/04/2013
3. 100
These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice at
the sole discretion of Nandan Petrochem Ltd.
Hydraulic Oil
HYDROVEL HLP
32, 46, 68, 100, 150
IS: 11656-1986 (RA 2002),DIN 51524 PART II,HLP Type
PRODUCT DESCRIPTION: HYDROVEL HLP oils are premium grade extra heavy duty antiwear hydraulic oils (HLP Type)
with outstanding thermal & oxidation stability and have exceptional load carrying capacity as indicated by high FZG
rating (11 Stage Pass). These oils are blended from highly refined selected base stocks fortified with high quality
antioxidant, antiwear additives to satisfy the increased demands of thermal and oxidation stability of modern fluids.
These oils have excellent hydrolytic stability, demulsibility, air release characteristic and have good filterability.
APPLICATION: HYDROVEL HLP are recommended for high pressure hydraulic systems, especially for sophisticated
high performance electro hydraulic or numerically controlled system, in hydraulic couplings and drive motor bearings.
These oils can also be used in screw compressor and enclosed gear boxes due to their outstanding thermal and
oxidation stability.
PERFORMANCE LEVEL: Meets IS: 11656 -1986 (RA 2002), DIN 51 524 Part II, HLP Type
Product Data Sheet
Typical Properties
CHARACTERISTICS HYDROVEL HLP
Grades 32 46 68 100 150
Kinematic Viscosity @40°C, cSt. 30-34 44-48 68-74 95-105 145-160
Viscosity Index, Min. 105 100 100 100 95
Flash Point ,COC,°C,Min. 200 200 220 250 250
Pour Point, °C, Max. (-)9 (-)9 (-)9 (-)6 (-)6
Copper strip Corrosion for 3 hrs @100°C. 1 1 1 1 1
Rust prevention Test, 24 hrs. Passes Passes Passes Passes Passes
Total Acidity (mg of KOH/g of oil) 1 1 1 1 1
Foam Characteristics: Foam stability after
10 minutes settling time ,foam ml,seq I/II/III Nil Nil Nil Nil Nil
Emulsion characteristics, Max. 40-37-3 (20) 40-37-3 (20) 40-37-3 (20) 40-37-3 (30) 40-37-3 (30)
Rev.No. 01-01/04/2013
5. 100
These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice at
the sole discretion of Nandan Petrochem Ltd.
Spindle Oil
SPINVEL
5, 12, 22
IS: 493 , PART II - 1981 ( RA 2004)
PRODUCT DESCRIPTION: SPINVEL Grades are blended from highly refined hydrotreated oils and have been
incorporated with antioxidant, antirust additives to meet the requirements of Textile Machineries particularly. They have
low pour point, high viscosity index and have good demulsibility characteristic also. They reduce the rate of wear, lower
the power consumption, eliminate spindle sticking and protects against corrosion.
APPLICATION: SPINVEL Grades are suitable for high speed spindles in textile machineries operating at very high
speeds and other machine tools where high speed and moderate loads are encountered.
PERFORMANCE LEVEL: Meets IS: 493 PART II-1981 (RA 2004).
Product Data Sheet
Typical Properties
CHARACTERISTICS SPINVEL
Grades 5 12 22
Kinematic Viscosity @40°C, cSt. 4.5-5.5 11-13 20-24
Viscosity Index, Min. 90 90 90
Flash Point ,PMCC**/COC,°C,Min. **90 160 180
Pour Point, °C, Max. (-)6 (-)6 (-)6
Copper strip Corrosion for 3 hrs @100°C. 1 1 1
Rev.No. 01-01/04/2013
6. These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice at
the sole discretion of Nandan Petrochem Ltd.
Machine Oil
MACHINEVEL
32, 46, 68, 100, 150, 220, 320, 460
IS: 493, PART I -1981 (RA 2004)
PRODUCT DESCRIPTION: MACHINEVEL grades blended from high viscosity index base stocks. They have good inherent
oxidation and thermal stability with excellent ability to separate from water. MACHINEVEL oils are specially formulated with
additives to improve adhesiveness and film strength characteristics.
APPLICATION: MACHINEVEL grades recommended preferably for non-critical all loss lubrication systems and other
applications such as lubrication of bearings, open gears, light loaded slides and guide ways of machine tools. They are also
recommended for lubrication of looms in the textile mills and other applications which do not require additive containing
lubricants. These oils can also be used for flushing of inaccessible internal surfaces of various automotive and industrial
equipment.
PERFORMANCELEVEL: MeetsIS:493(Part1):1981[RA2004]
Product Data Sheet
Typical Properties
CHARACTERISTICS MACHINEVEL
Grades 32 46 68 100 150 220 320 460
Kinematic Viscosity @40°C, cSt. 30-34 44-48 66-72 95-105 145-155 216-224 315-325 450-470
Viscosity Index, Min. 90 90 90 90 90 90 90 90
Flash Point ,COC,°C,Min. 200 200 220 220 220 240 250 250
Pour Point, °C, Max. (-)6 (-)6 (-)6 (-)6 (-)6 (-)6 (-)3 (-)3
Copper strip Corrosion for
3 hrs @100°C. 1 1 1 1 1 1 1 1
50
Rev.No. 01-01/04/2013
7. 200
These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice at
the sole discretion of Nandan Petrochem Ltd.
Industrial Gear Oil
GEARVEL
68, 100, 150, 220, 320, 460
IS: 8406-1993(RA 2006), DIN 51517 Part 3
PRODUCT DESCRIPTION: GEARVEL grades are premium quality lubricants fortified with sulphur-phosphorous type of
EP additives. They have excellent anti-foam, anti-rust, anti-oxidation and demulsification characteristics making them
ideal for systems subjected to heavy shock loads. GEARVEL grades are marketed over a wide viscosity ranges to
take care of the variety of speed-load conditions encountered by the industries. These oils contain chemically active
additives, which react with the metals of the gear’s teeth to form an anti-welding film between them.
APPLICATION: GEARVEL grades are recommended for all heavy duty enclosed gear drives with circulation or splash
lubrication system operating under heavy or shock load conditions up to a temperature of 100°C.
PERFORMANCE LEVEL: Meets IS: 8406 – 1993 (RA 2006), DIN 51517 Part 3.
Product Data Sheet
Typical Properties
CHARACTERISTICS GEARVEL
Grades 68 100 150 220 320 460
Kinematic Viscosity @40°C, cSt. 66-74 95-105 145-160 210-230 310-335 440-480
Viscosity Index, Min. 95 95 95 90 90 90
Flash Point ,COC,°C,Min. 200 210 220 220 220 230
Pour Point, °C, Max. (-)6 (-)6 (-)6 (-)3 (-)3 (-)3
Copper strip Corrosion for 3 hrs @100°C. 1 1 1 1 1 1
Rust prevention Test, 24 hrs. Passes Passes Passes Passes Passes Passes
Foam Characteristics: Foam stability after 10
minutes settling time ,foam ml,seq I/II/III Nil Nil Nil Nil Nil Nil
Rev.No. 01-01/04/2013
8. 200
These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice at
the sole discretion of Nandan Petrochem Ltd.
GEARVEL PLUS
Industrial Gear Oil
68,100,150,220,320,460
IS:8406-1993 ( RA 2006) DIN -51517 Part 3
Typical Properties
DESCRIPTION: GEARVEL PLUS range of oils are Extra Premium quality lubricants fortified with sulphur-phosphorous
type of EP additives. They have excellent anti-foam, anti-rust, anti-oxidation and demulsification characteristics making
them ideal for systems subjected to heavy shock loads. GEARVEL PLUS Oils are marketed over a wide viscosity
ranges to take care of the variety of speed-load conditions encountered by the industries. These oils contain
chemically active additives, which react with the metals of the gears's teeth to form an anti-welding film between
them. Specialty Grade EP additives provides high tenacity and very high load withstand features, with extremely low
evaporation loss.
APPLICATION: GEARVEL PLUS ranges are recommended for all heavy duty enclosed gear drives with circulation or
splash lubrication system operating under heavy or shock load conditions up to a temperature of 100°C. Gearvel Plus
460 specially recommended for crane gear boxes & Worm Gear boxes with extended oil change intervals and minimum
oil top up.
PERFORMANCE LEVEL: Meet IS: 8406 - 1993 (RA 2006), DIN 51517 Part 3 specifications.
Product Data Sheet
CHARACTERISTICS GEARVEL PLUS
Grades 68 100 150 220 320 460
Kinematic Viscosity @40°C, cSt. 66-74 95-105 145-160 210-230 310-330 440-480
Viscosity Index, Min. 135 135 135 125 115 110
Flash Point ,COC,°C,Min. 200 210 220 220 220 230
Pour Point, °C, Max. (-)6 (-)6 (-)6 (-)3 (-)3 (-)3
Copper strip Corrosion for 3 hrs @100°C. 1 1 1 1 1 1
Rust prevention Test, 24 hrs. Passes Passes Passes Passes Passes Passes
Foam Characteristics: Foam stability after
10 minutes settling time ,foam ml,seq I/II/III Nil Nil Nil Nil Nil Nil
Rev.No. 01-01/04/2013
9. TRANSVEL C-4 SAE 30
Product Data Sheet
Typical Properties
These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice at
the sole discretion of Nandan Petrochem Ltd.
Transmission OIL
Characteristics Test Method Specification
Colour Visual Red
K.Viscosity @100 °C IS 1448 P: 25 9.3-12.5
Viscosity Index, Min. IS 1448 P: 56 90
Flash Point ,°C,Min. IS 1448 P: 69 160
Pour Point,°C, Max. IS 1448 P: 10 (-)18
Product Description : TRANSVEL C-4 SAE 30 Oil is blended using highly refined virgin base stocks with special
additives to impart high oxidation stability, anti-wear, anti-rust, anti-foam and the desired frictional characteristics in
service. It is compatible with the seal material used in hydraulic transmissions systems. TRANSVEL C-4 SAE 30 is
hydraulic transmission to meet General Motors Detroit Diesl ALLISON type C-4 specifications.
Application : TRANSVEL C-4 SAE 30 oil is recommended for commercial power transmissions, industrial torque
converters and automatic transmissions manufactured by AVTEC Ltd.,Hosur,erstwhile power products division of
Hindustan Motors Ltd,under License from General Motors USA.Such hauling and cycling transmissions are fitted on a
wide variety of Allison heavy duty automatic Transmissions fitted to On-highway and off-highway equipments
e.g.Dumpers,scrappers,Shovel loaders,Excavators,Crawler-Tractors,etc.,used in Mines, cement quarries and Dam
construction sites etc.
BENEFITS:
• Smooth operation of precision hydraulic control systems.
• Smoother engagement / disengagement of clutch, because of desired friction properties to provide a ‘‘soft shift feel’’.
• Provides Protection against wear, rust and corrosion.
• Provide excellent seal life.
PERFORMANCE LEVEL: TES-228 for Hhydraulic transmission fluid type C-4 of Detroit Diesl ALLISON Division of
General
Grade: TES 228
Rev.No. 01-01/04/2013
10. Transmission OIL
TRANSVEL SAE 10 W
Characteristics Test Method Specification
K.Viscosity @100 °C, cSt IS 1448 P: 25 5.6
Viscosity Index, Min. IS 1448 P: 56 100
Flash Point,°C,Min. IS 1448 P: 69 200
Pour Point,°C,Max. IS 1448 P: 10 (-)27
TBN mg KOH/gm, Min. IS 1448 P:86 8.0
Sulphated Ash, mass % Max. IS 1448 P:4 1.50
Product Data Sheet
Typical Properties
These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice at
the sole discretion of Nandan Petrochem Ltd.
Product Description : TRANSVEL SAE 10W is formulated with highly refined base oils combined with ash less
dispersant, metallo-organic detergent and effective corrosion and oxidation inhibitor to meet the performance standards.
Application: TRANSVEL SAE 10W oil is recommended for all classes of supercharged diesel engines of high speed
output such as Heavy Duty Diesel Vehicles / Tractors, Earthmoving/off Highway equipments, Transmission systems of
caterpillar Equipment and large generating sets.
TRANSVEL SAE 10W meets the requirements of Hydraulic fluid type C2 specification of Detroit Diesel Allision, Division of
General Motors Corporation, USA.
BENEFITS
• Minimizes deposits & wear
• Prevent Rust and Corrosion
• Maintain excellent engine cleanliness
• Minimize deposits resulting from high output, low speed, and low temperature operations.
• Excellent control of cold sludge and corrosive wear
• Possess excellent oxidation stability to ensure long service life especially in Transmission systems.
PERFORMANCE LEVEL: API CD, US MIL-L-45199B, IS: 13656-2002 E-DL2, Caterpillar Series 3
API CD, MIL-L-45199B, IS: 13656-2002 E-DL2, Caterpillar Series 3
Rev.No. 01-01/04/2013
11. These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice at
the sole discretion of Nandan Petrochem Ltd.
Compressor Oil
COMPRESSVEL
68, 100, 150
IS: 13256-1992(RA 2004) TYPE DAA, DIN 51506 VD -L
PRODUCT DESCRIPTION: COMPRESSVEL grades are manufactured from highly refined base stocks with oxidation,
rust, corrosion and foam inhibitors. They provide excellent lubrication under high temperature and high load conditions
with low carbon-forming tendency and protection against entrained air. COMPRESSSVEL grades are designed to
provide superior thermal and oxidation stability and rust protection.
APPLICATION: COMPRESSVEL are recommended for use in the cylinder lubrication of reciprocating and rotary air
compressors operating up to 220°C air discharge temperature.
PERFORMANCE LEVEL: Meets IS 13256 – 1992 (RA 2004) TYPE DAA, DIN 51506 VD – L
Product Data Sheet
Typical Properties
CHARACTERISTICS COMPRESSVEL
68 100 150
Kinematic Viscosity @40°C, cSt. 66-70 95-105 145-160
Viscosity Index, Min. 100 100 100
Flash Point ,COC,°C,Min. 230 230 240
Pour Point, °C, Max. (-)12 (-)9 (-)6
Copper strip Corrosion for 3 hrs @100°C. 1 1 1
Emulsion characteristic ,Max 40-40- 40-40- 40-40-
0(10) 0(10) 0(20)
Rust Preventing characteristic Passes Passes Passes
200
Rev.No. 01-01/04/2013
12. These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice at
the sole discretion of Nandan Petrochem Ltd.
Machine Tool Way Oil
WAYVEL
32, 68, 220
PROPERITORY GRADE
PRODUCT DESCRIPTION: WAYVEL grades are manufactured from highly refined base stocks with high oxidation
stability and are formulated with oiliness, extreme pressure, anti - foam and tackiness additives. These oils provides
smooth, chatter free operations by carrying out higher load of machine tools with minimum stick-slip and improved
surface finish of the work piece
APPLICATION: WAYVEL grades are recommended for the lubrication of horizontal and vertical machine tool slide ways
and guides, planers, grinders, shapers etc.
PERFORMANCE LEVEL: Proprietary Grade
Product Data Sheet
Typical Properties
CHARACTERISTICS WAYVEL
32 68 220
Kinematic Viscosity @40°C, cSt. 30-34 64-72 210-230
Viscosity Index, Min. 95 95 95
Flash Point ,COC,°C,Min. 190 210 240
Pour Point, °C, Max. (-)3 (-)3 (-)3
50
Rev.No. 01-01/04/2013
13. 100
These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice at
the sole discretion of Nandan Petrochem Ltd.
Heat Transfer Oil
THERMVEL
32, 100
PROPERITORY GRADE
PRODUCT DESCRIPTION: THERMVEL grades are highly refined mineral oils with exceptional inherent oxidation
stability, strong thermal stability and good heat transfer properties for use as Industrial Heat transfer Fluids .These Oils
also possess low Volatility to minimize evaporation loss in the open systems and low vapour pressure to eliminate
vapour lock in the circulating pumps for long and trouble free service life in heat transfer systems.
APPLICATION: THERMVEL grades are recommended for use as heat transfer fluids in well-designed open heat transfer
systems operating up to 260°C and up to 300°C for closed system. The products find extensive applications in Textile,
Pharmaceuticals, Chemicals and other processing Industries.
PERFORMANCE LEVEL: Proprietary Grade
Product Data Sheet
Typical Properties
CHARACTERISTICS THERMVEL
Grade 32 100
Kinematic Viscosity @40°C, cSt. 30-34 95-105
Viscosity Index, Min. 95 95
Flash Point ,COC,°C,Min. 190 210
Pour Point, °C, Max. (-)3 (-)3
Operating Temperature Range,°C 260-300
Rev.No. 01-01/04/2013
14. Heat Transfer Oil
THERMVEL SPECIAL
32, 100
PROPERITORY GRADE
PRODUCT DESCRIPTION: THERMVEL SPECIAL grades are blended from light coloured high viscosity index base
stocks having good oxidation and thermal stability with specially selected antioxidants for extra long service life of these
Industrial Heat Transfer fluids. These Industrial Heat Transfer fluids have also very low level of volatility, vapour pressure,
sulphur content and CCR value to provide superior performance.
APPLICATION: THERMVEL SPECIAL grades are recommended for use as heat transfer fluids in well-designed open
heat transfer systems operating up to 280°C and up to 315°C for closed system. The products find extensive
applications in Textile, Pharmaceuticals, Chemical and other processing Industries
PERFORMANCE LEVEL: Proprietary Grade
Product Data Sheet
Typical Properties
CHARACTERISTICS THERMVEL SPECIAL
32 100
Kinematic Viscosity @40°C, cSt. 30-34 95-105
Viscosity Index, Min. 110 100
Flash Point ,COC,°C,Min. 200 230
Pour Point, °C, Max. (-)9 (-)9
Operating Temperature Range,°C 280-315
These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice at
the sole discretion of Nandan Petrochem Ltd.
100
Rev.No. 01-01/04/2013
15. 200
Soluble Cutting Oil
CUTVEL S
IS:1115 - 1986 (RA 2002)
PRODUCT DESCRIPTION: CUTVEL S is a MULTI-PURPOSE SOLUBLE CUTTING OIL manufactured from carefully
selected paraffinic base oils and proprietary emulsifiers which have a bearing on the stability of the emulsion
even with water of 400 ppm hardness. A stable milky white emulsion is prepared by adding the oil to water with
continuous stirring. CUTVEL S gives the desired cooling characteristics, provides rust protection, lubricity for the cutting
operation with good finish of work piece and longer life for tools. CUTVEL S is also fortified with appropriate biocides to
keep control of bacterial growth.
APPLICATION: CUTVEL S is recommended for a variety of cutting operations on both ferrous and non-ferrous metals.
For general machining operations the emulsion is normally prepared with 5% oil and for grinding operation the
emulsion has 2% of oil.
CAUTION : Not recommended for machining of magnesium as fine chips of magnesium is a fire hazard when
moistened with water.
PERFORMANCE LEVEL: Meets IS 1115-1986 (RA 2002).
Product Data Sheet
Typical Properties
CHARACTERISTICS CUTVEL S
Water, % mass, Max. 10.0
Copper strip corrosion at 100°C for 3 Hrs, Max. 1 (a)
Emulsion Stability Test ,5:1 and 20:1 ratio in
water of 400 ppm hardness Passes
Thermal stability Test Passes
Ash, % by mass, Max. 3.5
Frothing Test , 5:1 and 20:1 ratio in water of 200 ppm Passes
Flash Point,COC,°C, Min. 150
Cast Iron corrosion test 0/1-1
These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice at
the sole discretion of Nandan Petrochem Ltd.
Rev.No. 01-01/04/2013
16. 200
DESCRIPTION: CUTVEL S PLUS is a PREMIUM SOLUBLE CUTTING OIL manufactured from carefully selected
paraffinic base oils and proprietary emulsifiers which have a bearing on the stability of long lasting emulsion even
with water of 400 ppm hardness.
CUTVEL S PLUS gives the desired cooling characteristics and effective foam control, provides rust and corrosion
protections with required lubricity for the cutting operations with good finish of work pieces and longer life for tools.
CUTVEL S PLUS is also fortified with appropriate biocides to keep control of bacterial growth even during machine
shutdown period.
A stable milky white emulsion is prepared by adding the oil to water, with continuous stirring
APPLICATION: CUTVEL S PLUS is recommended for a variety of cutting operations on both ferrous and non-ferrous
metals. For general machining operations the emulsion is normally prepared with 5 % oil and for grinding
operation the emulsion has 2% of oil.
CAUTION : Not recommended for machining of magnesium as fine chips of magnesium is a fire hazard when
moistened with water.
PERFORMANCE LEVEL: Meets IS 1115-1986 (RA 2002) performance requirements.
Product Data Sheet
Typical Properties
CHARACTERISTICS CUTVEL S PLUS
Emulsion Stability & Frothing Passes
Copper Strip Corrosion at 100°C for 3 hours 1a
Cast Iron Corrosion Test 0/1-1
Thermal stability Test Passes
Flash Point,COC,°C, Min. 150
pH of 5% emulsion 9.2 (Typical)
Cutvel S Plus
Soluble Cutting Oil
IS: 1115-1986 (RA 2002)
These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice at
the sole discretion of Nandan Petrochem Ltd.
Rev.No. 01-01/04/2013
17. CHARACTERISTICS CUTVEL N 12
Kinematic Viscosity @40°C,cSt 11-13
Flash Point,COC,°C, Min. 150
Copper strip corrosion @ 100°C for 3 Hrs, Min 4
Sap Value, mg KOH/gm, Min 5
PRODUCT DESCRIPTION: CUTVEL N 12 contains active and non-active sulphur, fatty oil and chlorinated additives to
give better surface finish and longer life of cutting tools over a wide range of operating temperatures by providing an
excellent lubricating film which resists cutting stresses.
APPLICATION: CUTVEL N 12 is recommended for severe machining operations of gear cutting, broaching and
threading of alloys and stainless steels, where low viscosity oil is required.
The product is NOT recommended for use on non-ferrous metals.
PERFORMANCE LEVEL: Proprietary Grade
Product Data Sheet
Typical Properties
Neat Cutting Oil
CUTVEL N 12
Proprietary Grade
These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice at
the sole discretion of Nandan Petrochem Ltd.
50
Rev.No. 01-01/04/2013
18. Neat Cutting Oil
CUTVEL N 102
IS: 3065 -1985(RA 2002) TYPE 1 GRADE II
PRODUCT DESCRIPTION: CUTVEL N 102 is blended from highly refined base stocks with fatty oils and chlorinated
additives for a wide range of machining operations with good surface finish without discolouration of the work piece. It
minimizes the tools from excessive wear during use.
APPLICATION: CUTVEL N 102 is recommended for multipurpose machining operations of ferrous and non-ferrous
metals including different grinding and milling operations.
PERFORMANCE LEVEL: Meets IS: 3065-1985 (RA 2002), TYPE 1, Grade II
Product Data Sheet
Typical Properties
CHARACTERISTICS CUTVEL N 102
Kinematic Viscosity @40°C,cSt 20-24
Flash Point,COC,°C, Min. 160
Copper strip corrosion at 100°C for 3 Hrs, Max. 1
Sap Value, mg KOH/gm 9-11
These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice at
the sole discretion of Nandan Petrochem Ltd.
100
Rev.No. 01-01/04/2013
19. Neat Cutting Oil
CUTVEL N 203
IS:3065-1985 (RA 2002) TYPE 2 GRADE III
PRODUCT DESCRIPTION: CUTVEL N 203 contains highly refined base oils with inactive sulphurised fatty oil. It can be
used for a wide range of machining operations with good surface finish without discolouration of the work piece. It
minimizes the tools from excessive wear during use.
APPLICATION: CUTVEL N 203 is recommended for multipurpose machining operations of ferrous and non-ferrous
metals where severity of machining is not encountered.
PERFORMANCE LEVEL: Meets IS: 3065-1985 (RA 2002), TYPE 2, Grade III
Product Data Sheet
Typical Properties
CHARACTERISTICS CUTVEL N 203
Kinematic Viscosity @40°C,cSt 32-36
Flash Point,COC,°C, Min. 160
Copper strip corrosion at 100°C for 3 Hrs, Max. 1
Sap Value, mg KOH/gm 9-11
These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice at
the sole discretion of Nandan Petrochem Ltd.
100
Rev.No. 01-01/04/2013
20. Neat Cutting Oil
CUTVEL N 15
GRADE: IS: 3065-1985 (RA 2002), TYPE 3, Grade I
CHARACTERISTICS CUTVEL N 15
Kinematic Viscosity @40°C,cSt 15-20
Flash Point,COC,°C, Min. 160
Copper strip corrosion @ 100°C for 3 Hrs, Min. 4
Sap Value, mg KOH/gm, Min 5
PRODUCT DESCRIPTION: CUTVEL N 15 contains active and non-active sulphur, fatty oil and chlorinated additives to
give better surface finish and longer life of cutting tools over a wide range of operating temperatures by providing an
excellent lubricating film which resists cutting stresses.
APPLICATION: CUTVEL N 15 is recommended for severe machining operations of gear cutting, broaching and
threading of alloys and stainless steels, where moderate viscosity oil is required.
The product is NOT recommended for use on non-ferrous metals.
PERFORMANCE LEVEL: CUTVEL N 15 meets the requirement of IS: 3065-1985 (RA 2002), TYPE 3, Grade I
Product Data Sheet
Typical Properties
These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice at
the sole discretion of Nandan Petrochem Ltd.
50
Rev.No. 01-01/04/2013
21. 100
Neat Cutting Oil
CUTVEL N 302
IS: 3065 -1985 (RA 2002) TYPE 3 GRADE II
PRODUCT DESCRIPTION: CUTVEL N 302 contains active and non-active sulphur, fatty oil and chlorinated additives to
give better surface finish and longer life of cutting tools over a wide range of operating temperatures by providing
excellent lubricating film which resists cutting stresses.
APPLICATION: CUTVEL N 302 is recommended for machining operations of gear cutting, broaching and threading of
alloys and stainless steels, where moderate viscosity oil is required.
The product is NOT recommended for use on non-ferrous metals.
PERFORMANCE LEVEL: Meets IS: 3065-1985 (RA 2002), TYPE 3, Grade II
Product Data Sheet
Typical Properties
CHARACTERISTICS CUTVEL N 302
Kinematic Viscosity @40°C,cSt 34-40
Flash Point,COC,°C, Min. 160
Copper strip corrosion at 100°C for 3 Hrs, Min. 4
Sap Value, mg KOH/gm, Min 10
These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice at
the sole discretion of Nandan Petrochem Ltd.
Rev.No. 01-01/04/2013
22. These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice at
the sole discretion of Nandan Petrochem Ltd.
CHARACTERISTICS EDMVEL 2
Colour, ASTM, Max. 1.0
Kinematic Viscosity at 40°C, cSt 2.0-3.0
Flash Point, COC, °C, Min. 90
Copper Strip Corrosion for 3 Hrs. at 100°C. 1
PRODUCT DESCRIPTION: EDMVEL 2 is highly refined oil, recommended for submerged ram-type electrical discharge
machining of dies and other complex recessed shapes. This is a low viscosity oil with high flash point, slight odor and
has natural resistance to oxidation. Its low level of volatility provides dependable safety and minimal loss from
evaporation during use. The high dielectric constant promotes an efficient energy -to-work ratio. The electric spark is
concentrated between the electrode and work piece for maximum metal removal and minimum scattering and energy
loss that may lead to overheating and premature oxidation. As a result EDMVEL 2 provides extended service life with
minimum power consumption.
APPLICATION: In all electrical discharge machines working by penetration especially for roughing, finishing and super
finishing work where a high removal rate is required For submerged ram-type electrical discharge machining of dies and
other complex recessed shapes. The requirements for insulation and controlled dielectric discharge during electric
discharge machining operations.
BENEFITS:
• Highly refined, bright and light colored low viscosity product with low odour
• Good heat transfer with high oxidation resistance to degradation for extended product life
• Quick chip removal properties for efficient EDM operation and better surface finish.
• Relating high flash point ensures no generation of fume and safety from fire hazards
• Optimum setting action and excellent filterability through cartridge eliminates clogging of fine orifices and valves.
• High wetability ensures liquid /metal contact with low electrode wear and uniform insulation
• Non-corrosive and requires least topping up quantity
• Low skin sensitivity in normal use for non-toxicity of the product.
PERFORMANCE LEVEL: proprietary grade
Product Data Sheet
Typical Properties
Spark Errossion Oil
EDMVEL 2
Grade: Proprietry Grade
50
Rev.No. 01-01/04/2013
23. 100
Honing Oil
HONEVEL
7, 10
PROPERIOTORY GRADE
PRODUCT DESCRIPTION: HONEVEL grades are inactive type low viscosity honing oils based on mineral oils fortified
with specially selected additives to impart good lubricity characteristics and low temperature fluidity for honing and
lapping operations of all ferrous and non-ferrous metals with good surface finish. These products have very light colour
for better visibility of work-pieces and tools to the operators, excellent chip flushing, good heat carrying capacity and
provide long service life to the honing stone.
APPLICATIONS: HONEVEL grades are recommended for machining operations, like honing, lapping, turning, drilling,
tapping etc. of all ferrous and non-ferrous metals and their alloys except Titanium alloys, for super finishing of work-
pieces.
PERFORMANCE LEVEL: Proprietary Grade
Product Data Sheet
Typical Properties
CHARACTERISTICS HONEVEL 7 HONEVEL 10
Kinematic Viscosity @40°C,cSt 4-6 9-10
Flash Point,COC,°C, Min. 130 150
Copper strip corrosion @ 100°C for 3 Hrs, Max. 1 1
Pour Point, °C, Max. (-)9 (-)9
These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice at
the sole discretion of Nandan Petrochem Ltd.
Rev.No. 01-01/04/2013
24. Synthetic Grinding Fluid
SYNTHVEL WSP
IS:11186-1985 ( RA 2002 )
2, 5, 12
PRODUCT DESCRIPTION: SYNTHVEL WSP grades are water based synthetic grinding fluid supplied in concentrated
form and are to be diluted with water in suitable ratios before use. These grinding fluids are free from mineral oil, fatty
matter and nitrite. These grinding fluids are economical with excellent cooling and anti - rust properties when applied in
grinding and other high speed machining operations of iron and steel with longer service life to grinding wheels and good
surface finish. The solution maintains the clarity throughout the service period and is not attacked by bacteria. The oil
removes grinding debris quickly and keeps the wheel exceptionally clean.
APPLICATION: SYNTHVEL WSP grades are recommended for grinding operations of Iron, Steel, Non-alloyed Steels,
Nickel Chromium Steels, High Nickel and Titanium alloys. It must not be used for grinding operations of aluminum, zinc,
copper or magnesium alloys, tin or cadmium coated parts. Dilution range for the products varies from 1:40 min.
to 1:100 max.
PERFORMANCE LEVEL: Meet IS: 11186 -1985 (RA 2002)
These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice at
the sole discretion of Nandan Petrochem Ltd.
50
Product Data Sheet
Typical Properties
Clear liquid with
Green Fluorescence
Clear liquid with
Green Fluorescence
Clear liquid with
Green Fluorescence
CHARACTERISTICS SYNTHVEL
Grades WSP 2 WSP 5 WSP 12
Appearance of 10% Volume in
Distilled Water
Specific Gravity at 15.6°C 1.200 1.220 1.260
pH of 2 % Fluid in Distilled Water, Min 9.0 9.0 9.0
Cast iron corrosion test in 50:1
Distilled water Passes Passes Passes
Rev.No. 01-01/04/2013
25. Quenching Oil
QUENCHVEL
IS: 2664-1980(RA 2004)
22, 32,68
PRODUCT DESCRIPTION: QUENCHVEL oils are blended from premium quality solvent refined paraffinic base stocks
which have high flash and fire points, and low volatility characteristics with specially selected additives for heat treatment
of work piece for improved safety and long service life of the products. These products provide proper and controlled
cooling with outstanding chemical and oxidation stability.
APPLICATION: Different quenching oils with wide range of quenching speeds are used for different types of quenching
operations to cover the ranges of quenching need on wide variety metallic parts. QUENCHVEL 22, QUENCVEL 32 and
QUENCHVEL 68 are straight mineral oil type quenching oils, where as QUENCHVEL 22C, QUENCVEL 32C and
QUENCHVEL 68C are compounded type quenching oils.
PERFORMANCE LEVEL: Meets IS: 2664 – 1980 (RA 2004)
Product Data Sheet
Typical Properties
CHARACTERISTICS QUENCHVEL
Grades 22/22C 32/32C 68/68C
Kinematic Viscosity @40°C, cSt. 20-24 30-34 64-72
Viscosity Index, Min. 90 90 90
Flash Point ,COC,°C,Min. 190 200 200
Pour Point, °C, Max. (-)6 (-)6 (-)3
These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice at
the sole discretion of Nandan Petrochem Ltd.
50
Rev.No. 01-01/04/2013
26. Rust Preventive Oil
(Solvent Based)
RUSTVEL WD S
Proprietary Grade
60, 90, 120
PRODUCT DESCRIPTION: RUSTVEL WD S (SOLVENT BASED-WATER DISPLACING TYPE) are light bodied solvent Cut
Back type, water displacing rust preventive oils. They form very thin, soft and powerful protective film on evaporation of
the solvent present in the rust preventive oils. RUSTVEL WD S are very good water displacing characteristic and
excellent finger print corrosion prevention property.
APPLICATION: RUSTVEL WD S can be applied by dipping, brushing, swabbing or spraying at ambient temperature for
the protection of the iron sheets, metal stacks, ball and roller bearings etc. from corrosion and rust.
PERFORMANCE LEVEL: Proprietary Grade.
Product Data Sheet
Typical Properties
CHARACTERISTICS RUSTVEL WDS
Grades 60 90 120
Flash Point ,Abel ** /PMCC °C,Min. 32** 60 70
Copper Strip Corrosion Test @50°C for 3 hrs 1 1 1
Film Thickness , Micron, in. 3.5 4.5 6.0
Water Displacement Properties Passes Passes Passes
These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice at
the sole discretion of Nandan Petrochem Ltd.
200
Rev.No. 01-01/04/2013
27. PRODUCT DESCRIPTION: RUSTVEL WD M are non-solvent type oily film forming type rust preventive oils with different
viscosities and film thickness. RUSTVEL WD M are blended from selected base stocks and special additives to ensure
excellent protection of metal components against rusting for longer and shorter duration in indoor and outdoor
applications respectively. Because of its non-drying characteristics, the removal of RUSTVEL WD M from the metal
components is easier by treating with petroleum solvents, alkaline cleaning or vapour degreasing agents and do not
require any special precautions during storage, handling and applications as they are free from any solvent.
APPLICATION: RUSTVEL WD M can be applied by immersion, brush, swab or spray for protecting metal components
from rusting.
PERFORMANCE LEVEL: Proprietary Grade.
Product Data Sheet
Typical Properties
CHARACTERISTICS RUSTVEL WD M
Grades 105 115 125
Kinematic Viscosity @40°C, cSt. (Typical) 15 24 450
Film Thickness , Micron, Min. 2 2 25
Flash Point ,COC °C,Min. 130 160 230
Copper Strip Corrosion Test @100°C for 3 hrs 1 1 1
Rust Preventive Oil
RUSTVEL WD M
Proprietary Grade
105, 115, 125
(Oil Based)
These are typical figures and do not constitute a specification. In pursuit of continuous improvement, these figures may be changed without notice at
the sole discretion of Nandan Petrochem Ltd.
200
Rev.No. 01-01/04/2013