Profile Gauge & Tool Co Ltd are a precision engineering company that specialise in close tolerance high quality products. Specialising in the High Speed End equipment, we have been supplying the rolling mill industry with precision parts for over twenty-five years. Profile Gauge & Tool Co Ltd are a precision engineering company that specialise in close tolerance high quality products. Specialising in the High Speed End equipment, we have been supplying the rolling mill industry with precision parts for over twenty-five years. Manufacturing parts from customer supplied drawings, designing parts to specific customer requirements or by providing a reverse engineering service, where manufacturing drawings become the property of the purchaser on completion. We are a medium sized Engineering Company that has been in operation for over 40years, offering an excellent range of services, developed specifically to provide High Speed NTM's with precision engineered products that satisfy the most demanding of standards at cost effective prices. We currently supply Roll Shafts, Taper Sleeves & Flingers to all of the UK NT Mills and at selected locations in Europe. We are able to offer in-house, CNC machining, Gear Cutting, Design, Manufacturing & Assembly of Jigs, Tooling and Fixtures. In addition we also have on site, a UKAS laboratory certified to provide a calibration service for measuring equipment and are frequently requested to carry out inspection on parts supplied by the OEM's to determine their accuracy against drawing specification. Profile Gauge are also the principle supplier for Ashlow Guides, to whom we supply direct. In addition the company provides a full reverse engineering facility - samples of component are accurately measured and then drawn in both 2D & 3D prior to manufacture - we also use FEM analysis to identify 'hot spots' which may possibly be the cause of a fundamental weakness in the original design. Following a visit to the Wire Exhibition in Dusseldorf last year, we have also been contacted by SMS-Meer who, following a visit to our factory to inspect the facility and satisfy themselves on the quality of the processes employed, have placed an order with us for Roll Shafts. In addition to supplying new parts we also offer a reconditioning service for the high value consumable parts such as pinion shafts, housings and taper sleeves. Where possible the parts are reconditioned back to the original drawing specification. This provides a very cost effective alternative to 'new' with no loss of quality and which has benifited many of our clients. We are constantly striving to develop ways to save money both in down time and manufacturing process and with feedback from our clients have developed a manufacturing process for the No-Twist Mill taper sleeves that when on trial have out-performed our competitors by twenty/thirty percent. Over the years we have gained a reputation for the supply of parts superior to those supplied by the original manufacturer. Listening to the customer and reacting to his comments have achieved this. Offering innovative solutions to their problems, improving the parts and increasing the life of the parts. This has a direct effect of reducing costs to the mill. Although we have specialised on the high speed end of rod and bar mill equipment our range of services are not confined to this area alone. We offer design and manufacture of jigs, tooling, fixtures and have an optical grinding facility for mill guide rollers. In addition we have, in-house, our own UKAS accredited laboratory to ensure accurate calibration and measurement of parts prior to dispatch. New Parts Program New parts supplied on a regular basis include pinion shafts, taper sleeves, flingers, cover plates, guides, bearing housing, eccentrics etc. Reconditioning Service We offer a reconditioning service for the high value consumable parts such as pinion shafts, housings and taper sleeves. Where possible the parts are reconditioned