Se ha denunciado esta presentación.
Utilizamos tu perfil de LinkedIn y tus datos de actividad para personalizar los anuncios y mostrarte publicidad más relevante. Puedes cambiar tus preferencias de publicidad en cualquier momento.

ISTRUZIONI DI ACCENSIONE DEL VAPORIZZATORE ARIZER SOLO >> By PuntoG

114 visualizaciones

Publicado el

PUNTOG - HEAD SHOP - VAPE SHOP - HEMP SHOP - GROW SHOP
VENDITA E ASSISTENZA ON LINE SU PRODOTTI PER IL FUMO ELETTRONICO - VAPORIZZATORI E SIGARETTE ELETTRONICHE - ECIG
www.puntog-shop.com
Mobile +39 345 889 3933
Email : info@puntog-shop.com

ORDINI TELEFONICI PER PRODOTTI PER IL FUMO ELETTRONICO E VAPORIZZATORI E LIQUIDI E-CIG
Spediamo la merce in tutta Italia con Consegna in pacco assolutamente robusto. Riceverai la merce entro tre giorni lavorativi dall’ordine. Chiama Ora!

Publicado en: Salud y medicina
  • Inicia sesión para ver los comentarios

  • Sé el primero en recomendar esto

ISTRUZIONI DI ACCENSIONE DEL VAPORIZZATORE ARIZER SOLO >> By PuntoG

  1. 1. Arizer Solo Instructions Step 1: To turn on the vaporizer, press and hold down both the up and down arrow buttons for a few seconds. Your Solo will begin heating to the standby temperature, close to the first heat level. Step 2: Use the arrow buttons to raise or lower your Solo’s temperature. The numbers represent the following temperatures: Level One 50 C / 122 F Level Two 185 C / 365 F Level Three 190 C / 374 F Level Four 195 C / 383 F Level Five 200 C / 392 F Level Six 205 C / 401 F Level Seven 210 C / 410 F 360 F / 185 C is the recommended level to begin experiencing vaporization, and then you can adjust according to personal preference. Step 3: Pack your herbs into the bowl end of the glass draw stem. Coarsely ground material is less likely to slip through the holes in the draw stem. Be sure to not over pack the stem, as this will prevent the proper airflow necessary for vaporization. Hold the Solo with the heating element facing downward and connect to the packed draw stem. Now flip the whole unit right side up. Step 4: Wait 10 to 15 seconds prior to taking slow and steady inhalations from the Solo. Draw lightly to prevent any material from being pulled through. Step 5: When you have finished vaporizing, turn the unit upside down and remove the draw stem. Be sure to clean out any excess material that may have fallen onto the heating element. Use the attached cap to cover the heating element when not in use.

×