4. INDUSTRY QUANDARIES
MULTI FAMILY, COMMERCIAL &
RESIDENDTIAL STRUCTURES
WATER INTRUSION THROUGH:
CRACKED STUCCO/BRICK/
CONCRETE WALLS
ROOFING COVERING MATERIALS
ELEVATED SLABS
BASEMENT WALLS
5. COMPETITIVE ADVANTAGES
Only Cementitious based coating system in the US
approved by the Health Departments and the EPA
in all 50 States.
More cost effective than traditional stucco
applications
Moisture resistant and allows for breathability
Extensive positive track record and testimonials
Moisture curing capabilities
Easy application process
Extensive color pallet
Extreme adhesion and compaction strength
6. Past Performance
Dewberry & Davis Study Veterans Hospital, Orlando, FL
Andros Island Navy Sub F.D.O.T
Base Tyndall Air Base
Patuxten Naval Air Station Greater Orlando Aviation
Ohio Adjutant general Army Authority
Orlando Expressway Authority
New Haven Court House Virgin Islands Port Authority/
Authority Marine & Air
Oakland Housing Authority Federal Emergency
Patrick Air Force Base Management Agency
Veteran’s Hoapital- Homestead Air Base
Oakland,CA Ft. Myer, Arlington, VA
Veteran’s Hospital- Vieira, FL Orlando Utilities
Commission, Orlando FL
9. EnviroTubes
Enviro-Tubes currently deployed,
shoreline protection and wetland re-
nourishment systems.
Currently for Enviro-Tube protection, we
are the only manufacturer of a coating
system that “significantly” adherers to the
petroleum based Bag Fabric.
51. Historical
renovation/preservation
Lead abatement/encapsulation
• Preserves a historical building’s
appearance while abating the lead base
paint or asbestos wall cladding
52.
53.
54.
55.
56.
57.
58. EXAMPLES OF PRODUCT USE
OUC WATER PROOFING ON WALLS AND ROOFS
Water Storage Tank,
Lake Highland
Orlando, FL
Encap Seal was applied as
a roof coating this water
Tank.
Allowing heavy
lift crane to traverse
without damage to As a water proof
The coating. coating on concrete /
stucco walls
63. PRODUCT SPECS
Environmentally friendly
Designed to encapsulate lead based
paint.
Encapsulates some forms of asbestos
Adheres to most sub-straits
Encap Seal achieves maximum
strength of 4500 PSI in 28 days
Pro-Tec-Coat achieves maximum
strength of 6000 PSI in 28 days
65. COMPETITIVE ADVANTAGES
Comparison Study of Landing and Patio water proofing systems
Products/ properties SONOGUARD VULKEM 350/351 ENCAP SEAL
Product base/ make up Polyurethane/paint Polyurethane/paint Cementitious/mortar
Bonds to smooth surfaces no no Extremely well
Level of surface prep required extensive extensive- moderate minor
Water proofer yes yes yes
Allows for water vapor release no no yes
Available colors standard/limited standard/limited standard/unlimited
Installed applications 3 parts 2 parts 1 part
530 PSI w/o fabric. W/
Tensile strength/ASTM C-780/D-412 752 320 fabric exceeds 2500psi
Compressive strengths N/A 2200psi 4500psi
Adhesion/ peal strengths 275psi 30psi 406 psi
Color application topical applied through-out through-out
slip resistance topical applied sand topical applied sand product finish & texture
Moisture curing yes no yes
1/2" or < w/o mesh
bridging limitations 1/16" max 1/16" max 1/2" or> w/ mesh
Packaging/ coverage 50-80 sqft/gallon 40 & 100 sqft/gallon 40sqft/50lb bag
application thickness 25/25/20 wet mills 40 & 15 wet mills 1/8"-1/4" min.
abrasion resistance ASTM D-4060 1000 cycles 1000 cycles exceeds 1000 cycles
Weatherization/ UV exposure N/A N/A Impervious
Warranty N/A on product only 5 years L&M
Combustible liquid and Combustible liquid and
Application Risks Vapor Vapor none
Requires maintenance agreement for
warranty Yes n/a No
Can be Pressure washed No No Yes
damaged by sharp objects, sand, gravel
metal yes yes no
Storage/shelf life 1 year/with proper storage n/a Unlimited w/proper storage
Clean up Reducer 990 or xylene Reducer 990 or xylene water
Manufacturers: BASF® Tremko, Industries The Encap Group, LLC
The Chemical company