In order to determine which direct fired process air heater you need for your application; you can either call Stelter & Brinck at 513-367-9300 or fill out the data sheet below

1. Direct Fired Air Heater Data Sheet
Stelter & Brinck’s Direct Air Heaters are commonly used in industries such as sand, printing, coating,
cement and curing. Stelter & Brinck offers 3 different types of direct fired air heaters: duct air
heaters, packaged air heaters, and gun style air heaters. Each of these 3 types of heaters is offered
in different standard styles, depending on your application. In order to determine which direct fired
process air heater you need for your application; you can either call Stelter & Brinck at 513-367-
9300 or fill out the data sheet below found at
http://www.stelterbrinck.com/duct_airheater_rfq.htm
DIRECT FIRED AIR HEATER
Application and Request For Quote Data Sheet
* = required
* Company
Contact
Address
Date
City
State
Zip Code
* Phone
Fax
* E-Mail
You Are (check one):
Original Equipment Manufacturer
Consulting Engineer
End User
Installation Location

2. Project name
What type of quote would you like (check one)?
Budget quote Firm Quote
Has money been appropriated for this project (check one)? Yes No
Quote due date
Projected purchase date: (Mo/Yr)
Process Air Inlet Temp
Max:
Min:
Process Air Outlet Temp
Max:
Min:
Mass Flow (Air)
Max:
Min:
Air Pressure
Max:
Min:
Describe the equipment you would like us to quote and the process:
Fuel Type (Natural Gas, Propane, Fuel Oil, Etc.):
Fuel Pressure (PSIG):

3. Electric Service (volts/phase/Hertz):
Electrical Classification of Heater Location (If Hazardous Provide Class, Division, Group):
Insurance or other codes:
Elevation ('ASL):
Low winter temp(ºF ºC):
High summer temp(ºF ºC):
Location (Check One):
Indoor Outdoor
Keywords: Direct fired air heater, direct air heater, data sheet, direct heater RFQ, stelter, brinck, stelter
& brinck, process air heater, combustion, industrial heat