Sun Film Turns Windshield Into Heads Up Display

Automotive – “Heads-Up”
DisplayConvert “Any” Windshield
“Instantly” Into a
“See Through”
Display
Sun Innovations, Inc.
How Instantly? – #1. Apply Film * #2 Turn On Projector * #3. Done!

RGB Transparent Emissive Films with Fluorescent Nanomaterials
How Sun Innovations, Inc. MediaGlassTM
Film
Converts GlassToTransparent Digital Displays
White Light from a
Projector Passes
Through Glass –
Because White Light
+ Glass Resonate
@ Different Frequencies
Therefore, Sun
Innovations Developed
A Patented Film That
Resonates @ The
Same Frequency of
Projector Light –
Capturing the Projected
Images
Patented Media GlassTM
Consists of 4 Layers of
Film – One Layer For
Each of the Primary
Colors + One Layer to
Capture UV Rays
Each Layer of Film Is
Filled With Phosphors -
That Are Excited and
Illuminate By A Different
Frequency of Blue Light
When The Blue Light
Hits The Film

RGB Transparent Emissive Films with Fluorescent Nanomaterials
How Sun Innovations, Inc. MediaGlassTM
Film
Converts GlassToTransparent Digital Displays
RGB by
wavelength
selective
excitation:
•R: 405 nm
•B: 428 nm
•G: 450 nm
If The Frequency Of The Light
Beam From The Projector –
Matches the Excitation Frequency
of a Layer of the Sun Innovations,
Inc. Media GlassTM Film – The
Excited Color Will Be Displayed on
The Appropriate Layer of Film
If The Frequencies Of The Light
Beam From The Projector –
Matches the Excitation
Frequencies of All 3 Primary
Colors. The Full Color Image
Projected Onto The Film Will Be
Displayed.

Full Color EPD on Pixeless MediaGlassTM
Emissive Screen
Ex1
Ex2
Ex3
Schematic ofUV DLP® front projector:
1 Lamp with Reflector
2 Visible/IR cut Filter
3 Illumination Optics
4 Color Wheel
5 Light Rod
6 Mirror
7 DMD™
8 Projection Lens
9 Fluorescent layer of Fluorescent Black Screen
123
3 4
56
7
8 9
RGB by
wavelength
selective
excitation:
•R: 405 nm
•B: 428 nm
•G: 450 nm

Technology: Expanded Heads-up Display (E-HUD)
A novel emissive projection display (EPD) technology on fully transparent
phosphor screen, which significantly expands HUD capability:
1. Display Sizes: Full windshield or window capable;
2. Display Site: Freeform, anywhere on windshield or window;
3. Projection Angles: ~Unlimited, after keystone correction
4. Viewing Angles: Unlimited;
5. Implementation: Easy with large range of projection angles
and throwing distances; no need for “combiner” or “wedge”;
6. Eliminate laser projection speckle with phosphor screen;
7. Projection light blocked by the screen and won’t leak out.

Our comprehensive global patents portfolio
• 8 US patents regarding emission projection display have been issued;
• Key patents filed globally, with 7 Chinese patents granted;
• The core technology is fully protected by a number of fundamental patents in the
following areas:
– Fundamental concept of rendering full color, projected image and video on
transparent fluorescent screen.
– Fluorescent/phosphoric materials used for transparent, emissive display
screen.
– Black screen and its applications.
– Projection display systems and theirs applications (include automobile,
commercial advertisement and TV).
– Static signage with transparent fluorescent screen and its applications.

Technology Transparency View Angle,
Image Quality
Display size Cost
/area
Usable on vehicle
or building glass?
Holographic
Projection Screen
Poor (~20%) ~60 degree,
Dim, light leaks
Large and
scalable
High No
Transparent OLED Fair (~50%) ~360 degree
Dim, in-door only
Small, ~14” Very
High
No
HUD and Wearable
displays
Good 5~10 degree
Good, virtual image
Small, needs
combiner
High For individual
user only
Transparent LCD Poor (~15%),
need backlight
~60 degree
Need backlight
Limited High No
Sun Innovations’
MediaGlass™
Superior
(>90%)
360 degree,
Outdoor usable
Large and
scalable
Low Yes, unlimited
public viewable
Competitive Analysis on All “Transparent” Displays
MediaGlass offers superior transparency, display quality and general
usability

Sun Innovations, Inc. MediaGlassTM
Film
Frequently Asked Questions:
--------------------------------------------
Q1. What is NEW! about Sun Innovations, Inc.'s - MediaGlassTM Film - that converts clear glass
windows and panels into Full Color
A1. Sun Innovations, Inc.'s - MediaGlassTM Film - is a completely new method for transparently
displaying images and text on clear glass windows and surfaces. Dr. Ted Sun, the CEO of Sun
Innovations, Inc is the inventor and the holder of 8 patents for his EPD - Emissive Projection Display
Technology.
There are a number of methods that will display some form of image on a clear glass surface, but none
include the:
1) Level of Transparency - 90%+
2) Viewing Angle - 360 Degrees / Outside Viewable
3) Size - Scalable (Postage Stamp to Side of a Building)
4) Price / Value (Low Priced - Especially Low for Large Displays)
5) Viewable on Automobiles and Building Glass
Frequently Asked Questions

Film
Q2. Why doesn't a standard projector display the image it is projecting when it is projected
onto a glass surface?
A2. Glass is intrinsically transparent to "any light." So when any light frequency is projected
onto glass it will just go right through the glass, without leaving "any image" on the glass. For
glass to be clear, it has to be transparent to visible light - so the light is going to pass right
through the glass.
Q3. When Sun Innovations, Inc. - MediaGlassTM Film is applied to a Clear Glass Surface -
what process occurs that makes the image visible?
A3. The Sun Innovations, Inc. - MediaGlassTM Film contains special Phosphor Crystals which
absorbs the light emitted from the projector and then re-emits the light into visible light.
By Capturing and Re-Emitting all three of the primary colors - Red + Blue + Green - The Full
Color Image will be displayed on the film - which also would then be displayed on the glass
affixed to the film.

Film
Q4. Is a Special Projector needed to excite the phosphor layers of the film and display the full
color image.
A4. The projector must be able to project light at a very low frequency - that is in the range that
excites the Red - Blue - Green phosphors.
Because the image that is displayed on the Film is not created by the Projector - it is created
by the phosphors in the film.
Q5. So what specifically is being projected from the Projector?
A5: It is a source of energy that will excite the phosphor crystals within the film. The light being
emitted from the projector is of a very low frequency - it is a blue / violet light that can be
absorbed by the phosphor crystals and converted into RGB light.

Film
Q6. What is unique about Phosphor Crystals and what does it mean to "Excite" the Phosphor
Crystals.
A6. Phosphor Crystals absorb the blue / violet light (energy) emitted from the projector - and
then as long as the frequencies of the blue / violet lights (energy) emitted from the projector -
match the frequency that excites the individual R-G-B phosphors - the "Excited" Phosphor
crystals - will then re-emit the energy it has absorbed in the form of Photons / RGB light.
The Phosphor Crystals within the film "glow" - you can pumped them up if you will when they
are excited by the Selective Excitation Wavelength from the projector - creating an Emissive
Light: Red - Blue - Green based on the wavelength emitted. The Selective Excitation
Wavelengths of the three primary colors RGB = R: 405 nm / B: 428 nm / G: 450 nm and it
becomes an Emissive Display (Emissive means it displays RGB colors).

Film
Q7. What is the composition of each layer of the Sun Innovations, Inc. - MediaGlassTM Film.
A7. The Sun Innovations, Inc. - MediaGlassTM Film - consists of up to 4 layers of film -
depending on whether the desired color image output is 1, 2 or 3 colors.
If the desired image is a Full Color image - then the film would have 4 layers:
1. Red 2. Green 3. Blue 4. UV Filter.
Each layer of film is comprised of Phosphor Crystals that when excited - by low frequencies of
energy - absorb the energy and then re-emits the energy or "Glows" in the form of R-G-B light.
And since the phosphor crystals are transparent, an image is displayed on the glass that is
transparent - that you can "see-through"

Film
Q8. What is the purpose of the 4th layer of film - the UV layer?
A8. The UV layer cuts off any excitation of the RGB layers of the film - from the solar rays
emitted from the sun - because solar power can also excite the phosphors.
So using the UV blocking layer of the film it cuts off the excitation from the solar power of the
UV rays. Since the UV rays from sun covers such a broad range of frequencies it could excite
all three RGB layers / colors.
Q9. Is the film that is used for the Heads-Up Display the same film that is used for Retail
Storefront and In-Store Displays?
A9. It depends. The Heads-Up display typically is a single color - Blue - which means only a
single layer of film - the blue layer - would need to be applied to the windshield. Normally the
single color of blue is used as only one color is needed to display information such as would
be displayed in a vehicle. Since only a single layer of film is used - the cost would be less than
the RGB film which would include 3 layers.

Film
Q10. Can any projector be used to display images on the Sun Innovations, Inc.'s -
MediaGlassTM Film?
A10. Most DLP (Digital Projection Ltd) projectors (from Texas Instruments) can be used either
in their standard form - or with slight modifications to display images
on Sun Innovations, Inc.'s - MediaGlassTM Film.
Q11. What specifications does my projector need to meet in order to be compatible with Sun
Innovations, Inc. - MediaGlassTM Film
A11. RGB - Selective Excitation Wavelengths:
Single Blue Film
------------------------
Emissive Light from Film: Blue
Excitation Center Wavelength: 405nm
Sample: 8.5" x 11" - SKU: B405-HA
Display Size: 32" Diagonal - 16:9 HD Format - SKU: B405-HA

Film
Single Red Film
-----------------------
Emissive Light from Film: Red
Excitation Center Wavelength: 375nm or 405nm
Sample: 8.5" x 11" - SKU: R375E.1
Display Size: 32" Diagonal - 16:9 HD Format - SKU: R375E.1
Single Green Film
---------------------------
Emissive Light from Film: Green
Excitation Center Wavelength: 375nm or 450nm
Sample: 8.5" x 11" - SKU: G405
Display Size: 32" Diagonal - 16:9 HD Format - SKU: G405

Film
Single White Film
--------------------------
Emissive Light from Film: White
Excitation Center Wavelength: 405nm
Sample: 8.5" x 11" - SKU: W405
Display Size: 32" Diagonal - 16:9 HD Format - SKU: W405
2 Color: Red & Blue Film
--------------------------------------
Emissive Light from Film: Red & Blue
Excitation Center Wavelength - Red: 375nm
Excitation Center Wavelength - Blue: 405nm
Sample: 8.5" x 11" - SKU: RB-A.UV
Display Size: 32" Diagonal - 16:9 HD Format - SKU: RB-A.UV

Film
2 Color Red & Green Film
--------------------------------------
Emissive Light from Film: Red & Green
Excitation Center Wavelength - Green: 450nm
Sample: 8.5" x 11" - SKU: RG.VIS
Display Size: 32" Diagonal - 16:9 HD Format - SKU: RG.VIS
Full-Color Film
----------------------
Emissive Light from Film: Red, Green, Blue
Excitation Center Wavelength - Blue: 425nm
Excitation Center Wavelength - Green: 450nm
Sample: 8.5" x 11" - SKU: RGB.UV.1 w/o Tint
Sample: 8.5" x 11" - SKU: RGB.UV.2 with Tint
Display Size: 32" Diagonal - 16:9 HD Format - SKU: RGB.UV.1
Display Size: 32" Diagonal - 16:9 HD Format - SKU: RGB.UV.2

Film
Q12. Before buying Sun Innovations, Inc.'s - MediaGlassTM Film - what role does the projector
play in creating / displaying the images.
A12. In DLP projectors, the Image is created by microscopically small mirrors laid out in a
matrix on either one or three semi-conductor chips. Each mirror represents one or
more pixels in the projected image and the number of mirrors corresponds to the resolution of
the projected image.
Most projectors that are used for business purposes are:
1) Single-Chip DLP Projectors - Utilizes a lamp shinning through a spinning color wheel onto a
matrix of mirrors to produce the various colors of an image on an opaque display
2) Three-Chip Projectors - Utilizes a prism to split light from the lamp, and each primary color
of light / Read - Blue - Green / is then routed to its own DLP chip, then recombined
and routed out through the lens.

Single-Chip DLP Projectors
------------------------------------------
In a projector with a single DLP chip, colors are produced either by placing a color wheel
between a white lamp and the DLP chip or by using individual light sources
to produce the primary colors, LEDs or lasers.
The color wheel is divided into multiple sectors: the primary additive colors: 1) Red, 2) Green
and Blue and in many cases white (clear).
The DLP chip is synchronized with the rotating motion of the color wheel so that the green
component is displayed on the DMD* when the green section of the color
wheel is in front of the lamp. The same is true for the red, blue and other sections.
(*DMD - Digital Micro Device - which are microscopically smalls mirrors laid out in a matrix on
a semiconductor chip that creates the image that is displayed by the projector.
Each mirror represents one or more pixels in the projected image. For instance a displayed
image with a resolution of 1024x768 - has a matrix of 1024 columns of mirrors on
one axis and 768 rows of mirrors lined out in each of the 1024 columns. These mirrors can be
repositioned rapidly to reflect light through the lens.)

Film
The colors are thus displayed sequentially at a sufficiently high rate that the observer sees
a composite "full color" image. Most projectors rotate at 10X the frame rate.
Additionally, multi-color and LED-based and laser based single-chip projectors are able to
eliminate the spinning wheel and minimize the rainbow effect since the pulse
rate of LEDs and Lasers are limited by physical motion.
Three-chip DLP projectors have no color wheels, and thus do not manifest this rainbow
artifact.

Three-Chip Projectors
---------------------------------
Again, Three-Chip Projectors Utilize a prism to split light from the lamp, and each primary
color of light / Read - Blue - Green / is then routed to its own DLP chip, then
recombined and routed out through the lens.
Light Source
--------------------
DLP technology is light-source agnostic and as such can be used effectively with a variety of
light sources. Historically, the main light source used on DLP display systems has been a
replaceable high pressure Xenon Arc Lamp unit, whereas most pico category (ultra-small)
DLP projectors use high-power LEDs or lasers as a source of illumination.
LED-based DLPs
--------------------------
The first commercially- available LED-based DLP HDTV came out by Samsung in 2006. The
LED-based DLPs virtually eliminated the need for lamp replacement and
eliminated the need for the color wheel.

Ordinary LED technology does not produce the intensity and high lumen output
characteristics required to replace arc lamps.
The special Patented LEDs used in Samsung projectors and TVs are PhatLight LEDs,
designed and manufactured by US based Luminus Devices. A single RGB PhatLight LED
chipset illuminates a projection TV. The PhatLight LEDs are used in the ultra-compact DLP
front projector commonly referred to as a "pocket projector."
Laser-Based DLPs
----------------------------
The first commercially available laser based DLP projection system was released in 2008
which also eliminate the use of the color wheel. Three separate color lasers
illuminate the DMD.
Film

Three-Chip Projectors
---------------------------------
Again, Three-Chip Projectors Utilize a prism to split light from the lamp, and each primary
color of light / Read - Blue - Green / is then routed to its own DLP chip, then
recombined and routed out through the lens.
Light Source
--------------------
DLP technology is light-source agnostic and as such can be used effectively with a variety of
light sources. Historically, the main light source used on DLP display systems has been a
replaceable high pressure Xenon Arc Lamp unit, whereas most pico category (ultra-small)
DLP projectors use high-power LEDs or lasers as a source of illumination.
LED-based DLPs
--------------------------
The first commercially- available LED-based DLP HDTV came out by Samsung in 2006. The
LED-based DLPs virtually eliminated the need for lamp replacement and
eliminated the need for the color wheel.

Virtual 3D
Retail: In-Store
Glass Cabinets
Display
Increased Store Traffic & In-Store Sales
Store Front Window Display
www.sun-innovations.com
David Kalstrom – 602-770-0012
sales@sun-innovations.com
POS Display
MediaGlassTM
Film
Converts Glass To
Transparent Digital
Displays

Sun Film Turns Windshield Into Heads Up Display

Recommended

Recommended

More Related Content

Recently uploaded

Recently uploaded (20)

Featured

Featured (20)

Sun Film Turns Windshield Into Heads Up Display