WestMoonint launches a new type of acrylic processing aid and acrylic impact modifier, ACM

1. Your Reliable Source for Synthetic Rubber & Chemical
1
ACVM Data Sheet
General Introduction
Chemical Definition: Chemical Auxiliary Agent
Brand Name: ACVM
ACVM, which is developed by our Partner universities, is new type of PVC processing aid or
acrylic processing aid.
ACVM is manufactured from acryl ate copolymer while introducing vinyl monomers, improving
the compatibility with PVC with special polymer processing technology.
ACVM is widely used in chloride polyethylene (CPVC) or polyethylene (PVC) sheet, pipe,
transparent products, wire and cable materials, and shoe materials application, etc.
Picture 1 shows transparent particles morphology by microsecope
Picture 1
ACVM Properties
i. ACVM could be easily handled and compatible with PVC resin, readily dispersing in PVC
resin.
ii. ACVM offer excellent plasticity, solving the surface migration of plasticizer; therefore ACVM
could reduce dosage of plasticizer in the shoe materials, wire and cable, and flexible
transparent articles applications.
iii. ACVM could enhance low temperature toughness and impact strength in the PVC
processing applications.
iv. ACVM offers excellent thermal stability and weather resistance.
v. ACVM could reduce the melt viscosity and plasticizing time, therefore it could increase
productivity
Address: ROOM2112, BLOCK C OF JINSHA WINERA PLAZA, NO.1 SHUJIN RD, CHENGDU, 610091, SICHUAN, CHINA
Tel: 86-028-61311272 Fax: 86-028-61311273 Web: www.westmoonint.com E-mail: info@westmoonint.com
WestMoonint and its logo are trademarks of WESTMOONINT (HK) CORPORATION LIMITED or one of its subsidiaries.
Copyright @ 2009 WESTMOONINT (HK) CORPORATION. All rights reserved.

2. Your Reliable Source for Synthetic Rubber & Chemical
2
vi. ACVM enables to reduce dosage of lubricant and dosage of filler, therefore it reduce the
manufacturing costs.
ACVM Specification
Type Viscosity Apparent Density Volatile Granularity Application
ml/g g/cm3 Content %,≤ (40mesh)% ≤
ACVM-10 107-118 0.6 1.0 98 Lubricating Purpose for PVC
Injection Molding,
Adhesives, Paints, etc
ACVM-12 136-143 0.6 1.0 98 Fusion Purpose for Rigid
and Semi Rigid PVC
Products
ACVM-13 144-156 0.6 1.0 98 Fusion Purpose for PVC Bar,
Tubing, and Sheet, etc
ACVM-15 >156 0.6 1.0 98 Fusion Purpose for Flexible
PVC Products
ACVM-16 96-106 0.6 1.0 98 Lubricating Purpose for PVC
Injection Molding and
Transparent Products, etc
ACVM-17 107-118 0.6 1.0 98 Special for Tubes and Pipes
Materials
ACVM-18 >170 0.6 1.0 98 Impact Purpose for High
Strength Products
Important Announcements: The any depictions in this paper can not be regarded as the abduction of infringing
patents. Seller has no any responsibilities for the statement clingers about products, the infringed pledges and any
losses on any occasions. The data and the results about products come from the controlled or lab works, and buyers
must validate those data and results about products according to their own applying conditions.
ACVM Application
ACVM is widely used in chloride polyethylene (CPVC) or polyethylene (PVC) sheet, pipe,
transparent products, wire and cable materials, and shoe materials process aid application, etc.
ACVM enables reduce dosage of CPE when combining with CPE applications.
Packaging
ACVM is stored in polyethylene woven bags, and each of them can contain 25 KG in net weight.
Storage
ACVM should be stored in dry and ventilated warehouse. ACVM must not allow being stored
outdoor, keeping away from sunshine and humidity during its storage or transportation and
Address: ROOM2112, BLOCK C OF JINSHA WINERA PLAZA, NO.1 SHUJIN RD, CHENGDU, 610091, SICHUAN, CHINA
Tel: 86-028-61311272 Fax: 86-028-61311273 Web: www.westmoonint.com E-mail: info@westmoonint.com
WestMoonint and its logo are trademarks of WESTMOONINT (HK) CORPORATION LIMITED or one of its subsidiaries.
Copyright @ 2009 WESTMOONINT (HK) CORPORATION. All rights reserved.

3. Your Reliable Source for Synthetic Rubber & Chemical
3
being transported in clean covered truck.
Issued by WESTMOONINT (HK) CORPORATION LIMITED in 2011
Version 2.11
Address: ROOM2112, BLOCK C OF JINSHA WINERA PLAZA, NO.1 SHUJIN RD, CHENGDU, 610091, SICHUAN, CHINA
Tel: 86-028-61311272 Fax: 86-028-61311273 Web: www.westmoonint.com E-mail: info@westmoonint.com
WestMoonint and its logo are trademarks of WESTMOONINT (HK) CORPORATION LIMITED or one of its subsidiaries.
Copyright @ 2009 WESTMOONINT (HK) CORPORATION. All rights reserved.